Blackfin: drop board resources for dead devices (pbx/ad9960)

These hardware devices are dead and the drivers never cleaned up/merged,
so punt the useless board resource info.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

2 files changed, 0 insertions, 54 deletions

diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 1bd8b61e6888..30ff3c4a3abe 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -201,15 +201,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x1c04,
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
 /* Notice: for blackfin, the speed_hz is the value of register
  * SPI_BAUD, not the real baudrate */
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
@@ -248,23 +239,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_PBX)
-	{
-		.modalias	 = "fxs-spi",
-		.max_speed_hz	 = 4,
-		.bus_num	 = 1,
-		.chip_select	 = 3,
-		.controller_data = &spi_si3xxx_chip_info,
-	},
-
-	{
-		.modalias	 = "fxo-spi",
-		.max_speed_hz	 = 4,
-		.bus_num	 = 1,
-		.chip_select	 = 2,
-		.controller_data = &spi_si3xxx_chip_info,
-	},
-#endif
 };
 
 /* SPI (0) */
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index f3dc2830631c..3954baa00c64 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -219,15 +219,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 static struct bfin5xx_spi_chip spidev_chip_info = {
 	.enable_dma = 0,
@@ -298,25 +289,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_PBX)
-	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 	{
 		.modalias = "spidev",