SPEAr: Remove existing padmux support for SPEAr

We must use pinctrl framework instead of defining per SoC pinmux drivers. This
patch removes existing padmux support present for SPEAr platform.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Warren <swarren@wwwdotorg.org>

1 files changed, 1 insertions, 388 deletions

diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index f46fc2692ab6..2db0bd14e481 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -21,357 +21,6 @@
 #include <mach/generic.h>
 #include <mach/hardware.h>
 
-/* pad multiplexing support */
-/* muxing registers */
-#define PAD_MUX_CONFIG_REG	0x00
-#define MODE_CONFIG_REG		0x04
-
-/* modes */
-#define NAND_MODE			(1 << 0)
-#define NOR_MODE			(1 << 1)
-#define PHOTO_FRAME_MODE		(1 << 2)
-#define LEND_IP_PHONE_MODE		(1 << 3)
-#define HEND_IP_PHONE_MODE		(1 << 4)
-#define LEND_WIFI_PHONE_MODE		(1 << 5)
-#define HEND_WIFI_PHONE_MODE		(1 << 6)
-#define ATA_PABX_WI2S_MODE		(1 << 7)
-#define ATA_PABX_I2S_MODE		(1 << 8)
-#define CAML_LCDW_MODE			(1 << 9)
-#define CAMU_LCD_MODE			(1 << 10)
-#define CAMU_WLCD_MODE			(1 << 11)
-#define CAML_LCD_MODE			(1 << 12)
-#define ALL_MODES			0x1FFF
-
-struct pmx_mode spear300_nand_mode = {
-	.id = NAND_MODE,
-	.name = "nand mode",
-	.mask = 0x00,
-};
-
-struct pmx_mode spear300_nor_mode = {
-	.id = NOR_MODE,
-	.name = "nor mode",
-	.mask = 0x01,
-};
-
-struct pmx_mode spear300_photo_frame_mode = {
-	.id = PHOTO_FRAME_MODE,
-	.name = "photo frame mode",
-	.mask = 0x02,
-};
-
-struct pmx_mode spear300_lend_ip_phone_mode = {
-	.id = LEND_IP_PHONE_MODE,
-	.name = "lend ip phone mode",
-	.mask = 0x03,
-};
-
-struct pmx_mode spear300_hend_ip_phone_mode = {
-	.id = HEND_IP_PHONE_MODE,
-	.name = "hend ip phone mode",
-	.mask = 0x04,
-};
-
-struct pmx_mode spear300_lend_wifi_phone_mode = {
-	.id = LEND_WIFI_PHONE_MODE,
-	.name = "lend wifi phone mode",
-	.mask = 0x05,
-};
-
-struct pmx_mode spear300_hend_wifi_phone_mode = {
-	.id = HEND_WIFI_PHONE_MODE,
-	.name = "hend wifi phone mode",
-	.mask = 0x06,
-};
-
-struct pmx_mode spear300_ata_pabx_wi2s_mode = {
-	.id = ATA_PABX_WI2S_MODE,
-	.name = "ata pabx wi2s mode",
-	.mask = 0x07,
-};
-
-struct pmx_mode spear300_ata_pabx_i2s_mode = {
-	.id = ATA_PABX_I2S_MODE,
-	.name = "ata pabx i2s mode",
-	.mask = 0x08,
-};
-
-struct pmx_mode spear300_caml_lcdw_mode = {
-	.id = CAML_LCDW_MODE,
-	.name = "caml lcdw mode",
-	.mask = 0x0C,
-};
-
-struct pmx_mode spear300_camu_lcd_mode = {
-	.id = CAMU_LCD_MODE,
-	.name = "camu lcd mode",
-	.mask = 0x0D,
-};
-
-struct pmx_mode spear300_camu_wlcd_mode = {
-	.id = CAMU_WLCD_MODE,
-	.name = "camu wlcd mode",
-	.mask = 0x0E,
-};
-
-struct pmx_mode spear300_caml_lcd_mode = {
-	.id = CAML_LCD_MODE,
-	.name = "caml lcd mode",
-	.mask = 0x0F,
-};
-
-/* devices */
-static struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = {
-	{
-		.ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
-			ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
-		.mask = PMX_FIRDA_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_fsmc_2_chips = {
-	.name = "fsmc_2_chips",
-	.modes = pmx_fsmc_2_chips_modes,
-	.mode_count = ARRAY_SIZE(pmx_fsmc_2_chips_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = {
-	{
-		.ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
-			ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
-		.mask = PMX_FIRDA_MASK | PMX_UART0_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_fsmc_4_chips = {
-	.name = "fsmc_4_chips",
-	.modes = pmx_fsmc_4_chips_modes,
-	.mode_count = ARRAY_SIZE(pmx_fsmc_4_chips_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_keyboard_modes[] = {
-	{
-		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
-			LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
-			CAML_LCDW_MODE | CAMU_LCD_MODE | CAMU_WLCD_MODE |
-			CAML_LCD_MODE,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear300_pmx_keyboard = {
-	.name = "keyboard",
-	.modes = pmx_keyboard_modes,
-	.mode_count = ARRAY_SIZE(pmx_keyboard_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_clcd_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK ,
-	}, {
-		.ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE |
-			CAMU_LCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_clcd = {
-	.name = "clcd",
-	.modes = pmx_clcd_modes,
-	.mode_count = ARRAY_SIZE(pmx_clcd_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_gpio_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE | CAMU_LCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_MII_MASK,
-	}, {
-		.ids = LEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE,
-		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
-	}, {
-		.ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_WLCD_MODE,
-		.mask = PMX_MII_MASK | PMX_TIMER_3_4_MASK,
-	}, {
-		.ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE,
-		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK,
-	}, {
-		.ids = ATA_PABX_WI2S_MODE,
-		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK
-			| PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_gpio = {
-	.name = "telecom_gpio",
-	.modes = pmx_telecom_gpio_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_gpio_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_tdm_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
-			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE
-			| HEND_WIFI_PHONE_MODE | ATA_PABX_WI2S_MODE
-			| ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
-			| CAMU_WLCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_tdm = {
-	.name = "telecom_tdm",
-	.modes = pmx_telecom_tdm_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_tdm_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = {
-	{
-		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
-			LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE
-			| ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE |
-			CAML_LCDW_MODE | CAML_LCD_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk = {
-	.name = "telecom_spi_cs_i2c_clk",
-	.modes = pmx_telecom_spi_cs_i2c_clk_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_spi_cs_i2c_clk_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_camera_modes[] = {
-	{
-		.ids = CAML_LCDW_MODE | CAML_LCD_MODE,
-		.mask = PMX_MII_MASK,
-	}, {
-		.ids = CAMU_LCD_MODE | CAMU_WLCD_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_camera = {
-	.name = "telecom_camera",
-	.modes = pmx_telecom_camera_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_camera_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_dac_modes[] = {
-	{
-		.ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
-			| CAMU_WLCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_TIMER_1_2_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_dac = {
-	.name = "telecom_dac",
-	.modes = pmx_telecom_dac_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_dac_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_i2s_modes[] = {
-	{
-		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE
-			| LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
-			ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
-			| CAMU_WLCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_i2s = {
-	.name = "telecom_i2s",
-	.modes = pmx_telecom_i2s_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_i2s_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = {
-	{
-		.ids = NAND_MODE | NOR_MODE,
-		.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
-			PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_boot_pins = {
-	.name = "telecom_boot_pins",
-	.modes = pmx_telecom_boot_pins_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_boot_pins_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
-			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
-			HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
-			CAMU_WLCD_MODE | CAML_LCD_MODE | ATA_PABX_WI2S_MODE |
-			ATA_PABX_I2S_MODE,
-		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
-			PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
-			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_sdhci_4bit = {
-	.name = "telecom_sdhci_4bit",
-	.modes = pmx_telecom_sdhci_4bit_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_sdhci_4bit_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
-			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
-			HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
-			CAMU_WLCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
-			PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
-			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_sdhci_8bit = {
-	.name = "telecom_sdhci_8bit",
-	.modes = pmx_telecom_sdhci_8bit_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_sdhci_8bit_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_gpio1_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE,
-		.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
-			PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_gpio1 = {
-	.name = "arm gpio1",
-	.modes = pmx_gpio1_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio1_modes),
-	.enb_on_reset = 1,
-};
-
-/* pmx driver structure */
-static struct pmx_driver pmx_driver = {
-	.mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x0000000f},
-	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
-};
-
 /* spear3xx shared irq */
 static struct shirq_dev_config shirq_ras1_config[] = {
 	{
@@ -425,22 +74,6 @@ static struct spear_shirq shirq_ras1 = {
 	},
 };
 
-/* padmux devices to enable */
-static struct pmx_dev *spear300_evb_pmx_devs[] = {
-	/* spear3xx specific devices */
-	&spear3xx_pmx_i2c,
-	&spear3xx_pmx_ssp_cs,
-	&spear3xx_pmx_ssp,
-	&spear3xx_pmx_mii,
-	&spear3xx_pmx_uart0,
-
-	/* spear300 specific devices */
-	&spear300_pmx_fsmc_2_chips,
-	&spear300_pmx_clcd,
-	&spear300_pmx_telecom_sdhci_4bit,
-	&spear300_pmx_gpio1,
-};
-
 /* DMAC platform data's slave info */
 struct pl08x_channel_data spear300_dma_info[] = {
 	{
@@ -639,7 +272,7 @@ static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
 
 static void __init spear300_dt_init(void)
 {
-	int ret = -EINVAL;
+	int ret;
 
 	pl080_plat_data.slave_channels = spear300_dma_info;
 	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info);
@@ -654,26 +287,6 @@ static void __init spear300_dt_init(void)
 		if (ret)
 			pr_err("Error registering Shared IRQ\n");
 	}
-
-	if (of_machine_is_compatible("st,spear300-evb")) {
-		/* pmx initialization */
-		pmx_driver.mode = &spear300_photo_frame_mode;
-		pmx_driver.devs = spear300_evb_pmx_devs;
-		pmx_driver.devs_count = ARRAY_SIZE(spear300_evb_pmx_devs);
-
-		pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
-		if (pmx_driver.base) {
-			ret = pmx_register(&pmx_driver);
-			if (ret)
-				pr_err("padmux: registration failed. err no: %d\n",
-						ret);
-			/* Free Mapping, device selection already done */
-			iounmap(pmx_driver.base);
-		}
-
-		if (ret)
-			pr_err("Initialization Failed");
-	}
 }
 
 static const char * const spear300_dt_board_compat[] = {