Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "This contains cleanups as preparation for other branches adding new
  features, we pulled 16 branches for 9 platforms into this one.

  Most notable here is the removal of support for ATAGS based OMAP4
  systems.  Since all OMAP4 machines are fully functional with DT based
  booting in 3.10, we can remove a lot of code here.

  Also noteworthy is Maxime Ripard's cleanup of the machine descriptors,
  which means we need no machine descriptors in a lot more cases and can
  boot additional machines by just having the respective device drivers
  enabled."

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
  ARM: picoxcell: remove .nr_irqs reference
  ARM: s5p64x0: avoid build warning for uncompress.h
  ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header
  ARM: SAMSUNG: Remove legacy watchdog reset code
  ARM: SAMSUNG: Let platforms use the new watchdog reset driver
  ARM: SAMSUNG: Add watchdog reset driver
  ARM: SAMSUNG: Use local definitions of watchdog registers
  watchdog: s3c2410_wdt: Use local register definitions
  ARM: S5P64X0: Use common uncompress.h part for plat-samsung
  ARM: SAMSUNG: Consolidate uncompress subroutine
  ARM: at91: drop rm9200dk board support
  ARM: dts: msm: Fix merge resolution
  ARM: OMAP1: Remove dma.h
  ARM: OMAP1: Remove legacy irda.h and irda setup from board files
  ARM: OMAP1: Remove duplicated DMA channel definitions
  ARM: OMAP1: Remove McBSP DMA channel definitions
  ARM: OMAP2+: Remove dma.h
  ARM: OMAP2+: hwmod: Remove remaining DMA channel definitions
  ARM: OMAP2+: Remove duplicated DMA channel definitions
  ARM: OMAP2+: Remove AES crypto device DMA channel definitions
  ...

1 files changed, 0 insertions, 194 deletions

diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 609b330e5110..2eb19d4d0aa1 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -189,125 +189,6 @@ static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 	return;
 }
 
-static
-void __init setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
-{
-	switch (port_mode[0]) {
-	case OMAP_EHCI_PORT_MODE_PHY:
-		omap_mux_init_signal("usbb1_ulpiphy_stp",
-			OMAP_PIN_OUTPUT);
-		omap_mux_init_signal("usbb1_ulpiphy_clk",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dir",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_nxt",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dat0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dat1",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dat2",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dat3",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dat4",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dat5",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dat6",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dat7",
-			OMAP_PIN_INPUT_PULLDOWN);
-			break;
-	case OMAP_EHCI_PORT_MODE_TLL:
-		omap_mux_init_signal("usbb1_ulpitll_stp",
-			OMAP_PIN_INPUT_PULLUP);
-		omap_mux_init_signal("usbb1_ulpitll_clk",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dir",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_nxt",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dat0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dat1",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dat2",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dat3",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dat4",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dat5",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dat6",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dat7",
-			OMAP_PIN_INPUT_PULLDOWN);
-			break;
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-	default:
-			break;
-	}
-	switch (port_mode[1]) {
-	case OMAP_EHCI_PORT_MODE_PHY:
-		omap_mux_init_signal("usbb2_ulpiphy_stp",
-			OMAP_PIN_OUTPUT);
-		omap_mux_init_signal("usbb2_ulpiphy_clk",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dir",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_nxt",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dat0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dat1",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dat2",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dat3",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dat4",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dat5",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dat6",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dat7",
-			OMAP_PIN_INPUT_PULLDOWN);
-			break;
-	case OMAP_EHCI_PORT_MODE_TLL:
-		omap_mux_init_signal("usbb2_ulpitll_stp",
-			OMAP_PIN_INPUT_PULLUP);
-		omap_mux_init_signal("usbb2_ulpitll_clk",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dir",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_nxt",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dat0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dat1",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dat2",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dat3",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dat4",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dat5",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dat6",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dat7",
-			OMAP_PIN_INPUT_PULLDOWN);
-			break;
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-	default:
-			break;
-	}
-}
-
 static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
@@ -405,78 +286,6 @@ static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 	}
 }
 
-static
-void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
-{
-	switch (port_mode[0]) {
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
-		omap_mux_init_signal("usbb1_mm_rxdp",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_mm_rxdm",
-			OMAP_PIN_INPUT_PULLDOWN);
-
-	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
-		omap_mux_init_signal("usbb1_mm_rxrcv",
-			OMAP_PIN_INPUT_PULLDOWN);
-
-	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
-		omap_mux_init_signal("usbb1_mm_txen",
-			OMAP_PIN_INPUT_PULLDOWN);
-
-
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
-		omap_mux_init_signal("usbb1_mm_txdat",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_mm_txse0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-	default:
-		break;
-	}
-
-	switch (port_mode[1]) {
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
-		omap_mux_init_signal("usbb2_mm_rxdp",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_mm_rxdm",
-			OMAP_PIN_INPUT_PULLDOWN);
-
-	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
-		omap_mux_init_signal("usbb2_mm_rxrcv",
-			OMAP_PIN_INPUT_PULLDOWN);
-
-	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
-		omap_mux_init_signal("usbb2_mm_txen",
-			OMAP_PIN_INPUT_PULLDOWN);
-
-
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
-		omap_mux_init_signal("usbb2_mm_txdat",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_mm_txse0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-	default:
-		break;
-	}
-}
-
 void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
 {
 	struct omap_hwmod	*uhh_hwm, *tll_hwm;
@@ -490,9 +299,6 @@ void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
 		if (omap_rev() <= OMAP3430_REV_ES2_1)
 			pdata->single_ulpi_bypass = true;
 
-	} else if (cpu_is_omap44xx()) {
-		setup_4430ehci_io_mux(pdata->port_mode);
-		setup_4430ohci_io_mux(pdata->port_mode);
 	}
 
 	uhh_hwm = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);