Merge tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc cleanups (part 2) from Olof Johansson:
 "More cleanups, continuing an earlier set with omap and samsung
  specific cleanups.  These could not go into the first set because they
  have dependencies on various other series that in turn depend on the
  first cleanups."

Fixed up conflicts in arch/arm/plat-omap/counter_32k.c due to commit
bd0493eaaf5c: "move read_{boot,persistent}_clock to the architecture
level" that changed how the persistent clocks were handled.  And trivial
conflicts in arch/arm/mach-omap1/common.h due to just independent
changes close to each other.

* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
  ARM: SAMSUNG: merge plat-s5p into plat-samsung
  ARM: SAMSUNG: move options for common s5p into plat-samsung/Kconfig
  ARM: SAMSUNG: move setup code for s5p mfc and mipiphy into plat-samsung
  ARM: SAMSUNG: move platform device for s5p uart into plat-samsung
  ARM: SAMSUNG: move hr timer for common s5p into plat-samsung
  ARM: SAMSUNG: move pm part for common s5p into plat-samsung
  ARM: SAMSUNG: move interrupt part for common s5p into plat-samsung
  ARM: SAMSUNG: move clock part for common s5p into plat-samsung
  ARM: S3C24XX: Use common macro to define resources on dev-uart.c
  ARM: S3C24XX: move common clock init into common.c
  ARM: S3C24XX: move common power-management code to mach-s3c24xx
  ARM: S3C24XX: move plat-s3c24xx/dev-uart.c into common.c
  ARM: S3C24XX: move plat-s3c24xx/cpu.c
  ARM: OMAP2+: Kconfig: convert SOC_OMAPAM33XX to SOC_AM33XX
  ARM: OMAP2+: Kconfig: convert SOC_OMAPTI81XX to SOC_TI81XX
  GPMC: add ECC control definitions
  ARM: OMAP2+: dmtimer: remove redundant sysconfig context restore
  ARM: OMAP: AM35xx: convert 3517 detection/flags to AM35xx
  ARM: OMAP: AM35xx: remove redunant cpu_is checks for AM3505
  ARM: OMAP1: Pass dma request lines in platform data to MMC driver
  ...

1 files changed, 23 insertions, 7 deletions

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 580e684e8825..46b09dae770e 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -50,6 +50,19 @@
 #define GPMC_ECC_SIZE_CONFIG	0x1fc
 #define GPMC_ECC1_RESULT        0x200
 
+/* GPMC ECC control settings */
+#define GPMC_ECC_CTRL_ECCCLEAR		0x100
+#define GPMC_ECC_CTRL_ECCDISABLE	0x000
+#define GPMC_ECC_CTRL_ECCREG1		0x001
+#define GPMC_ECC_CTRL_ECCREG2		0x002
+#define GPMC_ECC_CTRL_ECCREG3		0x003
+#define GPMC_ECC_CTRL_ECCREG4		0x004
+#define GPMC_ECC_CTRL_ECCREG5		0x005
+#define GPMC_ECC_CTRL_ECCREG6		0x006
+#define GPMC_ECC_CTRL_ECCREG7		0x007
+#define GPMC_ECC_CTRL_ECCREG8		0x008
+#define GPMC_ECC_CTRL_ECCREG9		0x009
+
 #define GPMC_CS0_OFFSET		0x60
 #define GPMC_CS_SIZE		0x30
 
@@ -860,8 +873,9 @@ int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
 	gpmc_ecc_used = cs;
 
 	/* clear ecc and enable bits */
-	val = ((0x00000001<<8) | 0x00000001);
-	gpmc_write_reg(GPMC_ECC_CONTROL, val);
+	gpmc_write_reg(GPMC_ECC_CONTROL,
+			GPMC_ECC_CTRL_ECCCLEAR |
+			GPMC_ECC_CTRL_ECCREG1);
 
 	/* program ecc and result sizes */
 	val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
@@ -869,13 +883,15 @@ int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
 
 	switch (mode) {
 	case GPMC_ECC_READ:
-		gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
+	case GPMC_ECC_WRITE:
+		gpmc_write_reg(GPMC_ECC_CONTROL,
+				GPMC_ECC_CTRL_ECCCLEAR |
+				GPMC_ECC_CTRL_ECCREG1);
 		break;
 	case GPMC_ECC_READSYN:
-		 gpmc_write_reg(GPMC_ECC_CONTROL, 0x100);
-		break;
-	case GPMC_ECC_WRITE:
-		gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
+		gpmc_write_reg(GPMC_ECC_CONTROL,
+				GPMC_ECC_CTRL_ECCCLEAR |
+				GPMC_ECC_CTRL_ECCDISABLE);
 		break;
 	default:
 		printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);