Merge branch 'disintegrate-asm-generic' of git://git.infradead.org/users/dhowells/linux-headers into asm-generic

Patches from David Howells <dhowells@redhat.com>:

This is to complete part of the UAPI disintegration for which the
preparatory patches were pulled recently.

Note that there are some fixup patches which are at the base of the
branch aimed at you, plus all arches get the asm-generic branch merged in too.

* 'disintegrate-asm-generic' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/asm-generic
  UAPI: Fix conditional header installation handling (notably kvm_para.h on m68k)
  c6x: remove c6x signal.h
  UAPI: Split compound conditionals containing __KERNEL__ in Arm64
  UAPI: Fix the guards on various asm/unistd.h files

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

14 files changed, 1548 insertions, 15 deletions

diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
index 23eed0035ed8..adb5e7649659 100644
--- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
@@ -14,8 +14,6 @@
 #ifndef __AMS_DELTA_FIQ_H
 #define __AMS_DELTA_FIQ_H
 
-#include <plat/irqs.h>
-
 /*
  * Interrupt number used for passing control from FIQ to IRQ.
  * IRQ12, described as reserved, has been selected.
diff --git a/arch/arm/mach-omap1/include/mach/board-ams-delta.h b/arch/arm/mach-omap1/include/mach/board-ams-delta.h
new file mode 100644
index 000000000000..ad6f865d1f16
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/board-ams-delta.h
@@ -0,0 +1,71 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-ams-delta.h
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
+#define __ASM_ARCH_OMAP_AMS_DELTA_H
+
+#if defined (CONFIG_MACH_AMS_DELTA)
+
+#define AMD_DELTA_LATCH2_SCARD_RSTIN	0x0400
+#define AMD_DELTA_LATCH2_SCARD_CMDVCC	0x0800
+#define AMS_DELTA_LATCH2_MODEM_CODEC	0x2000
+
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA	0
+#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK	1
+#define AMS_DELTA_GPIO_PIN_MODEM_IRQ	2
+#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH	4
+#define AMS_DELTA_GPIO_PIN_SCARD_NOFF	6
+#define AMS_DELTA_GPIO_PIN_SCARD_IO	7
+#define AMS_DELTA_GPIO_PIN_CONFIG	11
+#define AMS_DELTA_GPIO_PIN_NAND_RB	12
+
+#define AMS_DELTA_GPIO_PIN_LCD_VBLEN		240
+#define AMS_DELTA_GPIO_PIN_LCD_NDISP		241
+#define AMS_DELTA_GPIO_PIN_NAND_NCE		242
+#define AMS_DELTA_GPIO_PIN_NAND_NRE		243
+#define AMS_DELTA_GPIO_PIN_NAND_NWP		244
+#define AMS_DELTA_GPIO_PIN_NAND_NWE		245
+#define AMS_DELTA_GPIO_PIN_NAND_ALE		246
+#define AMS_DELTA_GPIO_PIN_NAND_CLE		247
+#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR		248
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT	249
+#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN		250
+#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC		251
+#define AMS_DELTA_GPIO_PIN_MODEM_NRESET		252
+#define AMS_DELTA_GPIO_PIN_MODEM_CODEC		253
+
+#define AMS_DELTA_LATCH2_GPIO_BASE	AMS_DELTA_GPIO_PIN_LCD_VBLEN
+#define AMS_DELTA_LATCH2_NGPIO		16
+
+#ifndef __ASSEMBLY__
+void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value);
+#define ams_delta_latch2_write(mask, value) \
+	ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \
+			AMS_DELTA_LATCH2_NGPIO, (mask), (value))
+#endif
+
+#endif /* CONFIG_MACH_AMS_DELTA */
+
+#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/arch/arm/mach-omap1/include/mach/board-sx1.h b/arch/arm/mach-omap1/include/mach/board-sx1.h
new file mode 100644
index 000000000000..355adbdaae33
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/board-sx1.h
@@ -0,0 +1,52 @@
+/*
+ * Siemens SX1 board definitions
+ *
+ * Copyright: Vovan888 at gmail com
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H
+#define __ASM_ARCH_SX1_I2C_CHIPS_H
+
+#define SOFIA_MAX_LIGHT_VAL	0x2B
+
+#define SOFIA_I2C_ADDR		0x32
+/* Sofia reg 3 bits masks */
+#define SOFIA_POWER1_REG	0x03
+
+#define	SOFIA_USB_POWER		0x01
+#define	SOFIA_MMC_POWER		0x04
+#define	SOFIA_BLUETOOTH_POWER	0x08
+#define	SOFIA_MMILIGHT_POWER	0x20
+
+#define SOFIA_POWER2_REG	0x04
+#define SOFIA_BACKLIGHT_REG	0x06
+#define SOFIA_KEYLIGHT_REG	0x07
+#define SOFIA_DIMMING_REG	0x09
+
+
+/* Function Prototypes for SX1 devices control on I2C bus */
+
+int sx1_setbacklight(u8 backlight);
+int sx1_getbacklight(u8 *backlight);
+int sx1_setkeylight(u8 keylight);
+int sx1_getkeylight(u8 *keylight);
+
+int sx1_setmmipower(u8 onoff);
+int sx1_setusbpower(u8 onoff);
+int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value);
+int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value);
+
+/* MMC prototypes */
+
+extern void sx1_mmc_init(void);
+extern void sx1_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */
diff --git a/arch/arm/mach-omap1/include/mach/board-voiceblue.h b/arch/arm/mach-omap1/include/mach/board-voiceblue.h
new file mode 100644
index 000000000000..27916b210f57
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/board-voiceblue.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * Hardware definitions for OMAP5910 based VoiceBlue board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VOICEBLUE_H
+#define __ASM_ARCH_VOICEBLUE_H
+
+extern void voiceblue_wdt_enable(void);
+extern void voiceblue_wdt_disable(void);
+extern void voiceblue_wdt_ping(void);
+
+#endif /*  __ASM_ARCH_VOICEBLUE_H */
+
diff --git a/arch/arm/mach-omap1/include/mach/flash.h b/arch/arm/mach-omap1/include/mach/flash.h
new file mode 100644
index 000000000000..0d88499b79e9
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/flash.h
@@ -0,0 +1,17 @@
+/*
+ * Flash support for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_FLASH_H
+#define __OMAP_FLASH_H
+
+#include <linux/mtd/map.h>
+
+struct platform_device;
+extern void omap1_set_vpp(struct platform_device *pdev, int enable);
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h
index e737706a8fe1..ebf86c0f4f46 100644
--- a/arch/arm/mach-omap1/include/mach/gpio.h
+++ b/arch/arm/mach-omap1/include/mach/gpio.h
@@ -1,5 +1,3 @@
 /*
  * arch/arm/mach-omap1/include/mach/gpio.h
  */
-
-#include <plat/gpio.h>
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
index 01e35fa106b8..84248d250adb 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -1,11 +1,46 @@
 /*
  * arch/arm/mach-omap1/include/mach/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ *	 file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
 
+#include <asm/sizes.h>
 #ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <plat/cpu.h>
+
 /*
  * NOTE: Please use ioremap + __raw_read/write where possible instead of these
  */
@@ -35,7 +70,249 @@ static inline u32 omap_cs3_phys(void)
 			? 0 : OMAP_CS3_PHYS;
 }
 
+#endif	/* ifndef __ASSEMBLER__ */
+
+#include <plat/serial.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ *	 files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
+#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
+#define MPU_TIMER_FREE		(1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
+#define MPU_TIMER_AR		(1 << 1)
+#define MPU_TIMER_ST		(1 << 0)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE		(0xfffece00)
+#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF		1
+#define CK_IDLEF		2
+#define CK_ENABLEF		4
+#define CK_SELECTF		8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL		(0xfffecf00)
+
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
+#define DSP_CONFIG_REG_BASE     IOMEM(0xe1008000)
+#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
+#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE		(0xfffe0800)
+#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
+#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
+#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
+#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
+#	define SOFT_UDC_REQ		(1 << 4)
+#	define SOFT_USB_CLK_REQ		(1 << 3)
+#	define SOFT_DPLL_REQ		(1 << 0)
+#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
+#	define DIS_MMC2_DPLL_REQ	(1 << 11)
+#	define DIS_MMC1_DPLL_REQ	(1 << 10)
+#	define DIS_UART3_DPLL_REQ	(1 << 9)
+#	define DIS_UART2_DPLL_REQ	(1 << 8)
+#	define DIS_UART1_DPLL_REQ	(1 << 7)
+#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
+#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
+#define OMAP_IH1_BASE		0xfffecb00
+#define OMAP_IH2_BASE		0xfffe0000
+
+#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET	0x00
+#define IRQ_MIR_REG_OFFSET	0x04
+#define IRQ_SIR_IRQ_REG_OFFSET	0x10
+#define IRQ_SIR_FIQ_REG_OFFSET	0x14
+#define IRQ_CONTROL_REG_OFFSET	0x18
+#define IRQ_ISR_REG_OFFSET	0x9c
+#define IRQ_ILR0_REG_OFFSET	0x1c
+#define IRQ_GMR_REG_OFFSET	0xa0
+
 #endif
-#endif
 
-#include <plat/hardware.h>
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0		0xfffe1080
+#define MOD_CONF_CTRL_1		0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0		0xfffe1000
+#define FUNC_MUX_CTRL_1		0xfffe1004
+#define FUNC_MUX_CTRL_2		0xfffe1008
+#define COMP_MODE_CTRL_0	0xfffe100c
+#define FUNC_MUX_CTRL_3		0xfffe1010
+#define FUNC_MUX_CTRL_4		0xfffe1014
+#define FUNC_MUX_CTRL_5		0xfffe1018
+#define FUNC_MUX_CTRL_6		0xfffe101C
+#define FUNC_MUX_CTRL_7		0xfffe1020
+#define FUNC_MUX_CTRL_8		0xfffe1024
+#define FUNC_MUX_CTRL_9		0xfffe1028
+#define FUNC_MUX_CTRL_A		0xfffe102C
+#define FUNC_MUX_CTRL_B		0xfffe1030
+#define FUNC_MUX_CTRL_C		0xfffe1034
+#define FUNC_MUX_CTRL_D		0xfffe1038
+#define PULL_DWN_CTRL_0		0xfffe1040
+#define PULL_DWN_CTRL_1		0xfffe1044
+#define PULL_DWN_CTRL_2		0xfffe1048
+#define PULL_DWN_CTRL_3		0xfffe104c
+#define PULL_DWN_CTRL_4		0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E		0xfffe1090
+#define FUNC_MUX_CTRL_F		0xfffe1094
+#define FUNC_MUX_CTRL_10	0xfffe1098
+#define FUNC_MUX_CTRL_11	0xfffe109c
+#define FUNC_MUX_CTRL_12	0xfffe10a0
+#define PU_PD_SEL_0		0xfffe10b4
+#define PU_PD_SEL_1		0xfffe10b8
+#define PU_PD_SEL_2		0xfffe10bc
+#define PU_PD_SEL_3		0xfffe10c0
+#define PU_PD_SEL_4		0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE	0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE			(0xfffec900)
+#define MPUI_CTRL			(MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE			0xfffbd000
+#define OMAP_LPG2_BASE			0xfffbd800
+#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_PWL_BASE			0xfffb5800
+#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
+#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#include "omap7xx.h"
+#include "omap1510.h"
+#include "omap16xx.h"
+
+#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/mach-omap1/include/mach/irda.h b/arch/arm/mach-omap1/include/mach/irda.h
new file mode 100644
index 000000000000..40f60339d1c6
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/irda.h
@@ -0,0 +1,33 @@
+/*
+ *  arch/arm/plat-omap/include/mach/irda.h
+ *
+ *  Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_SEL		1	/* Selects IrDA */
+#define IR_SIRMODE	2
+#define IR_FIRMODE	4
+#define IR_MIRMODE	8
+
+struct omap_irda_config {
+	int transceiver_cap;
+	int (*transceiver_mode)(struct device *dev, int mode);
+	int (*select_irda)(struct device *dev, int state);
+	int rx_channel;
+	int tx_channel;
+	unsigned long dest_start;
+	unsigned long src_start;
+	int tx_trigger;
+	int rx_trigger;
+	int mode;
+};
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h
index 9292fdc1cb0b..729992d7d26a 100644
--- a/arch/arm/mach-omap1/include/mach/irqs.h
+++ b/arch/arm/mach-omap1/include/mach/irqs.h
@@ -1,5 +1,268 @@
 /*
- * arch/arm/mach-omap1/include/mach/irqs.h
+ *  arch/arm/plat-omap/include/mach/irqs.h
+ *
+ *  Copyright (C) Greg Lonnon 2001
+ *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ *	 are different.
  */
 
-#include <plat/irqs.h>
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA		1
+#define INT_FIQ			3
+#define INT_RTDX		6
+#define INT_DSP_MMU_ABORT	7
+#define INT_HOST		8
+#define INT_ABORT		9
+#define INT_BRIDGE_PRIV		13
+#define INT_GPIO_BANK1		14
+#define INT_UART3		15
+#define INT_TIMER3		16
+#define INT_DMA_CH0_6		19
+#define INT_DMA_CH1_7		20
+#define INT_DMA_CH2_8		21
+#define INT_DMA_CH3		22
+#define INT_DMA_CH4		23
+#define INT_DMA_CH5		24
+#define INT_TIMER1		26
+#define INT_WD_TIMER		27
+#define INT_BRIDGE_PUB		28
+#define INT_TIMER2		30
+#define INT_LCD_CTRL		31
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ	0
+#define INT_1510_RES2		2
+#define INT_1510_SPI_TX		4
+#define INT_1510_SPI_RX		5
+#define INT_1510_DSP_MAILBOX1	10
+#define INT_1510_DSP_MAILBOX2	11
+#define INT_1510_RES12		12
+#define INT_1510_LB_MMU		17
+#define INT_1510_RES18		18
+#define INT_1510_LOCAL_BUS	29
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ	INT_1510_IH2_IRQ
+#define INT_1610_IH2_FIQ	2
+#define INT_1610_McBSP2_TX	4
+#define INT_1610_McBSP2_RX	5
+#define INT_1610_DSP_MAILBOX1	10
+#define INT_1610_DSP_MAILBOX2	11
+#define INT_1610_LCD_LINE	12
+#define INT_1610_GPTIMER1	17
+#define INT_1610_GPTIMER2	18
+#define INT_1610_SSR_FIFO_0	29
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
+ */
+#define INT_7XX_IH2_FIQ		0
+#define INT_7XX_IH2_IRQ		1
+#define INT_7XX_USB_NON_ISO	2
+#define INT_7XX_USB_ISO		3
+#define INT_7XX_ICR		4
+#define INT_7XX_EAC		5
+#define INT_7XX_GPIO_BANK1	6
+#define INT_7XX_GPIO_BANK2	7
+#define INT_7XX_GPIO_BANK3	8
+#define INT_7XX_McBSP2TX	10
+#define INT_7XX_McBSP2RX	11
+#define INT_7XX_McBSP2RX_OVF	12
+#define INT_7XX_LCD_LINE	14
+#define INT_7XX_GSM_PROTECT	15
+#define INT_7XX_TIMER3		16
+#define INT_7XX_GPIO_BANK5	17
+#define INT_7XX_GPIO_BANK6	18
+#define INT_7XX_SPGIO_WR	29
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE		32
+
+#define INT_KEYBOARD		(1 + IH2_BASE)
+#define INT_uWireTX		(2 + IH2_BASE)
+#define INT_uWireRX		(3 + IH2_BASE)
+#define INT_I2C			(4 + IH2_BASE)
+#define INT_MPUIO		(5 + IH2_BASE)
+#define INT_USB_HHC_1		(6 + IH2_BASE)
+#define INT_McBSP3TX		(10 + IH2_BASE)
+#define INT_McBSP3RX		(11 + IH2_BASE)
+#define INT_McBSP1TX		(12 + IH2_BASE)
+#define INT_McBSP1RX		(13 + IH2_BASE)
+#define INT_UART1		(14 + IH2_BASE)
+#define INT_UART2		(15 + IH2_BASE)
+#define INT_BT_MCSI1TX		(16 + IH2_BASE)
+#define INT_BT_MCSI1RX		(17 + IH2_BASE)
+#define INT_SOSSI_MATCH		(19 + IH2_BASE)
+#define INT_USB_W2FC		(20 + IH2_BASE)
+#define INT_1WIRE		(21 + IH2_BASE)
+#define INT_OS_TIMER		(22 + IH2_BASE)
+#define INT_MMC			(23 + IH2_BASE)
+#define INT_GAUGE_32K		(24 + IH2_BASE)
+#define INT_RTC_TIMER		(25 + IH2_BASE)
+#define INT_RTC_ALARM		(26 + IH2_BASE)
+#define INT_MEM_STICK		(27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU	(28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC		(0 + IH2_BASE)
+#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
+#define INT_1610_USB_OTG	(8 + IH2_BASE)
+#define INT_1610_SoSSI		(9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
+#define INT_1610_DSP_MMU	(28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
+#define INT_1610_STI		(32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
+#define INT_1610_GPTIMER3	(34 + IH2_BASE)
+#define INT_1610_GPTIMER4	(35 + IH2_BASE)
+#define INT_1610_GPTIMER5	(36 + IH2_BASE)
+#define INT_1610_GPTIMER6	(37 + IH2_BASE)
+#define INT_1610_GPTIMER7	(38 + IH2_BASE)
+#define INT_1610_GPTIMER8	(39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
+#define INT_1610_MMC2		(42 + IH2_BASE)
+#define INT_1610_CF		(43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
+#define INT_1610_SPI		(49 + IH2_BASE)
+#define INT_1610_DMA_CH6	(53 + IH2_BASE)
+#define INT_1610_DMA_CH7	(54 + IH2_BASE)
+#define INT_1610_DMA_CH8	(55 + IH2_BASE)
+#define INT_1610_DMA_CH9	(56 + IH2_BASE)
+#define INT_1610_DMA_CH10	(57 + IH2_BASE)
+#define INT_1610_DMA_CH11	(58 + IH2_BASE)
+#define INT_1610_DMA_CH12	(59 + IH2_BASE)
+#define INT_1610_DMA_CH13	(60 + IH2_BASE)
+#define INT_1610_DMA_CH14	(61 + IH2_BASE)
+#define INT_1610_DMA_CH15	(62 + IH2_BASE)
+#define INT_1610_NAND		(63 + IH2_BASE)
+#define INT_1610_SHA1MD5	(91 + IH2_BASE)
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
+ */
+#define INT_7XX_HW_ERRORS	(0 + IH2_BASE)
+#define INT_7XX_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_7XX_CFCD		(2 + IH2_BASE)
+#define INT_7XX_CFIREQ		(3 + IH2_BASE)
+#define INT_7XX_I2C		(4 + IH2_BASE)
+#define INT_7XX_PCC		(5 + IH2_BASE)
+#define INT_7XX_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_7XX_SPI_100K_1	(7 + IH2_BASE)
+#define INT_7XX_SYREN_SPI	(8 + IH2_BASE)
+#define INT_7XX_VLYNQ		(9 + IH2_BASE)
+#define INT_7XX_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_7XX_McBSP1TX	(11 + IH2_BASE)
+#define INT_7XX_McBSP1RX	(12 + IH2_BASE)
+#define INT_7XX_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_7XX_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_7XX_MCSI		(16 + IH2_BASE)
+#define INT_7XX_uWireTX		(17 + IH2_BASE)
+#define INT_7XX_uWireRX		(18 + IH2_BASE)
+#define INT_7XX_SMC_CD		(19 + IH2_BASE)
+#define INT_7XX_SMC_IREQ	(20 + IH2_BASE)
+#define INT_7XX_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_7XX_TIMER32K	(22 + IH2_BASE)
+#define INT_7XX_MMC_SDIO	(23 + IH2_BASE)
+#define INT_7XX_UPLD		(24 + IH2_BASE)
+#define INT_7XX_USB_HHC_1	(27 + IH2_BASE)
+#define INT_7XX_USB_HHC_2	(28 + IH2_BASE)
+#define INT_7XX_USB_GENI	(29 + IH2_BASE)
+#define INT_7XX_USB_OTG		(30 + IH2_BASE)
+#define INT_7XX_CAMERA_IF	(31 + IH2_BASE)
+#define INT_7XX_RNG		(32 + IH2_BASE)
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_7XX_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_7XX_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_7XX_SHA1_MD5	(36 + IH2_BASE)
+#define INT_7XX_SPI_100K_2	(37 + IH2_BASE)
+#define INT_7XX_RNG_IDLE	(38 + IH2_BASE)
+#define INT_7XX_MPUIO		(39 + IH2_BASE)
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_7XX_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_7XX_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_7XX_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_7XX_DMA_CH6		(53 + IH2_BASE)
+#define INT_7XX_DMA_CH7		(54 + IH2_BASE)
+#define INT_7XX_DMA_CH8		(55 + IH2_BASE)
+#define INT_7XX_DMA_CH9		(56 + IH2_BASE)
+#define INT_7XX_DMA_CH10	(57 + IH2_BASE)
+#define INT_7XX_DMA_CH11	(58 + IH2_BASE)
+#define INT_7XX_DMA_CH12	(59 + IH2_BASE)
+#define INT_7XX_DMA_CH13	(60 + IH2_BASE)
+#define INT_7XX_DMA_CH14	(61 + IH2_BASE)
+#define INT_7XX_DMA_CH15	(62 + IH2_BASE)
+#define INT_7XX_NAND		(63 + IH2_BASE)
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES	192
+#define IH_GPIO_BASE		(128 + IH2_BASE)
+#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
+#ifdef	CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS	24
+#else
+#define OMAP_FPGA_NR_IRQS	0
+#endif
+#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+#define NR_IRQS			OMAP_FPGA_IRQ_END
+
+#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
+
+#include <mach/hardware.h>
+
+#ifdef CONFIG_FIQ
+#define FIQ_START		1024
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/mux.h b/arch/arm/mach-omap1/include/mach/mux.h
new file mode 100644
index 000000000000..323948959200
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/mux.h
@@ -0,0 +1,454 @@
+/*
+ * arch/arm/plat-omap/include/mach/mux.h
+ *
+ * Table of the Omap register configurations for the FUNC_MUX and
+ * PULL_DWN combinations.
+ *
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: Please use the following naming style for new pin entries.
+ *	 For example, W8_1610_MMC2_DAT0, where:
+ *	 - W8	     = ball
+ *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
+ *	 - MMC2_DAT0 = function
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
+#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
+
+#ifdef	CONFIG_OMAP_MUX_DEBUG
+#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
+					.mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
+					.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
+					.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status)	.pull_name = "OMAP7XX_IO_CONF_"#reg, \
+					.pull_reg = OMAP7XX_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#else
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status)	.pull_reg = OMAP7XX_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#endif /* CONFIG_OMAP_MUX_DEBUG */
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
+		pull_reg, pull_bit, pull_status,	\
+		pu_pd_reg, pu_pd_status, debug_status)	\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG(mux_reg, mode_offset, mode)		\
+	PULL_REG(pull_reg, pull_bit, pull_status)	\
+	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
+},
+
+
+/*
+ * OMAP730/850 has a slightly different config for the pin mux.
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and
+ *   not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ *   as mux config
+ */
+#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode,	\
+		   pull_bit, pull_status, debug_status)\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG_7XX(mux_reg, mode_offset, mode)		\
+	PULL_REG_7XX(mux_reg, pull_bit, pull_status)	\
+	PU_PD_REG(NA, 0)		\
+},
+
+struct pin_config {
+	char 			*name;
+	const unsigned int 	mux_reg;
+	unsigned char		debug;
+
+	const unsigned char mask_offset;
+	const unsigned char mask;
+
+	const char *pull_name;
+	const unsigned int pull_reg;
+	const unsigned char pull_val;
+	const unsigned char pull_bit;
+
+	const char *pu_pd_name;
+	const unsigned int pu_pd_reg;
+	const unsigned char pu_pd_val;
+
+#if	defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+	const char *mux_reg_name;
+#endif
+
+};
+
+enum omap7xx_index {
+	/* OMAP 730 keyboard */
+	E2_7XX_KBR0,
+	J7_7XX_KBR1,
+	E1_7XX_KBR2,
+	F3_7XX_KBR3,
+	D2_7XX_KBR4,
+	C2_7XX_KBC0,
+	D3_7XX_KBC1,
+	E4_7XX_KBC2,
+	F4_7XX_KBC3,
+	E3_7XX_KBC4,
+
+	/* USB */
+	AA17_7XX_USB_DM,
+	W16_7XX_USB_PU_EN,
+	W17_7XX_USB_VBUSI,
+	W18_7XX_USB_DMCK_OUT,
+	W19_7XX_USB_DCRST,
+
+	/* MMC */
+	MMC_7XX_CMD,
+	MMC_7XX_CLK,
+	MMC_7XX_DAT0,
+
+	/* I2C */
+	I2C_7XX_SCL,
+	I2C_7XX_SDA,
+
+	/* SPI */
+	SPI_7XX_1,
+	SPI_7XX_2,
+	SPI_7XX_3,
+	SPI_7XX_4,
+	SPI_7XX_5,
+	SPI_7XX_6,
+
+	/* UART */
+	UART_7XX_1,
+	UART_7XX_2,
+};
+
+enum omap1xxx_index {
+	/* UART1 (BT_UART_GATING)*/
+	UART1_TX = 0,
+	UART1_RTS,
+
+	/* UART2 (COM_UART_GATING)*/
+	UART2_TX,
+	UART2_RX,
+	UART2_CTS,
+	UART2_RTS,
+
+	/* UART3 (GIGA_UART_GATING) */
+	UART3_TX,
+	UART3_RX,
+	UART3_CTS,
+	UART3_RTS,
+	UART3_CLKREQ,
+	UART3_BCLK,	/* 12MHz clock out */
+	Y15_1610_UART3_RTS,
+
+	/* PWT & PWL */
+	PWT,
+	PWL,
+
+	/* USB master generic */
+	R18_USB_VBUS,
+	R18_1510_USB_GPIO0,
+	W4_USB_PUEN,
+	W4_USB_CLKO,
+	W4_USB_HIGHZ,
+	W4_GPIO58,
+
+	/* USB1 master */
+	USB1_SUSP,
+	USB1_SEO,
+	W13_1610_USB1_SE0,
+	USB1_TXEN,
+	USB1_TXD,
+	USB1_VP,
+	USB1_VM,
+	USB1_RCV,
+	USB1_SPEED,
+	R13_1610_USB1_SPEED,
+	R13_1710_USB1_SE0,
+
+	/* USB2 master */
+	USB2_SUSP,
+	USB2_VP,
+	USB2_TXEN,
+	USB2_VM,
+	USB2_RCV,
+	USB2_SEO,
+	USB2_TXD,
+
+	/* OMAP-1510 GPIO */
+	R18_1510_GPIO0,
+	R19_1510_GPIO1,
+	M14_1510_GPIO2,
+
+	/* OMAP1610 GPIO */
+	P18_1610_GPIO3,
+	Y15_1610_GPIO17,
+
+	/* OMAP-1710 GPIO */
+	R18_1710_GPIO0,
+	V2_1710_GPIO10,
+	N21_1710_GPIO14,
+	W15_1710_GPIO40,
+
+	/* MPUIO */
+	MPUIO2,
+	N15_1610_MPUIO2,
+	MPUIO4,
+	MPUIO5,
+	T20_1610_MPUIO5,
+	W11_1610_MPUIO6,
+	V10_1610_MPUIO7,
+	W11_1610_MPUIO9,
+	V10_1610_MPUIO10,
+	W10_1610_MPUIO11,
+	E20_1610_MPUIO13,
+	U20_1610_MPUIO14,
+	E19_1610_MPUIO15,
+
+	/* MCBSP2 */
+	MCBSP2_CLKR,
+	MCBSP2_CLKX,
+	MCBSP2_DR,
+	MCBSP2_DX,
+	MCBSP2_FSR,
+	MCBSP2_FSX,
+
+	/* MCBSP3 */
+	MCBSP3_CLKX,
+
+	/* Misc ballouts */
+	BALLOUT_V8_ARMIO3,
+	N20_HDQ,
+
+	/* OMAP-1610 MMC2 */
+	W8_1610_MMC2_DAT0,
+	V8_1610_MMC2_DAT1,
+	W15_1610_MMC2_DAT2,
+	R10_1610_MMC2_DAT3,
+	Y10_1610_MMC2_CLK,
+	Y8_1610_MMC2_CMD,
+	V9_1610_MMC2_CMDDIR,
+	V5_1610_MMC2_DATDIR0,
+	W19_1610_MMC2_DATDIR1,
+	R18_1610_MMC2_CLKIN,
+
+	/* OMAP-1610 External Trace Interface */
+	M19_1610_ETM_PSTAT0,
+	L15_1610_ETM_PSTAT1,
+	L18_1610_ETM_PSTAT2,
+	L19_1610_ETM_D0,
+	J19_1610_ETM_D6,
+	J18_1610_ETM_D7,
+
+	/* OMAP16XX GPIO */
+	P20_1610_GPIO4,
+	V9_1610_GPIO7,
+	W8_1610_GPIO9,
+	N20_1610_GPIO11,
+	N19_1610_GPIO13,
+	P10_1610_GPIO22,
+	V5_1610_GPIO24,
+	AA20_1610_GPIO_41,
+	W19_1610_GPIO48,
+	M7_1610_GPIO62,
+	V14_16XX_GPIO37,
+	R9_16XX_GPIO18,
+	L14_16XX_GPIO49,
+
+	/* OMAP-1610 uWire */
+	V19_1610_UWIRE_SCLK,
+	U18_1610_UWIRE_SDI,
+	W21_1610_UWIRE_SDO,
+	N14_1610_UWIRE_CS0,
+	P15_1610_UWIRE_CS3,
+	N15_1610_UWIRE_CS1,
+
+	/* OMAP-1610 SPI */
+	U19_1610_SPIF_SCK,
+	U18_1610_SPIF_DIN,
+	P20_1610_SPIF_DIN,
+	W21_1610_SPIF_DOUT,
+	R18_1610_SPIF_DOUT,
+	N14_1610_SPIF_CS0,
+	N15_1610_SPIF_CS1,
+	T19_1610_SPIF_CS2,
+	P15_1610_SPIF_CS3,
+
+	/* OMAP-1610 Flash */
+	L3_1610_FLASH_CS2B_OE,
+	M8_1610_FLASH_CS2B_WE,
+
+	/* First MMC */
+	MMC_CMD,
+	MMC_DAT1,
+	MMC_DAT2,
+	MMC_DAT0,
+	MMC_CLK,
+	MMC_DAT3,
+
+	/* OMAP-1710 MMC CMDDIR and DATDIR0 */
+	M15_1710_MMC_CLKI,
+	P19_1710_MMC_CMDDIR,
+	P20_1710_MMC_DATDIR0,
+
+	/* OMAP-1610 USB0 alternate pin configuration */
+	W9_USB0_TXEN,
+	AA9_USB0_VP,
+	Y5_USB0_RCV,
+	R9_USB0_VM,
+	V6_USB0_TXD,
+	W5_USB0_SE0,
+	V9_USB0_SPEED,
+	V9_USB0_SUSP,
+
+	/* USB2 */
+	W9_USB2_TXEN,
+	AA9_USB2_VP,
+	Y5_USB2_RCV,
+	R9_USB2_VM,
+	V6_USB2_TXD,
+	W5_USB2_SE0,
+
+	/* 16XX UART */
+	R13_1610_UART1_TX,
+	V14_16XX_UART1_RX,
+	R14_1610_UART1_CTS,
+	AA15_1610_UART1_RTS,
+	R9_16XX_UART2_RX,
+	L14_16XX_UART3_RX,
+
+	/* I2C OMAP-1610 */
+	I2C_SCL,
+	I2C_SDA,
+
+	/* Keypad */
+	F18_1610_KBC0,
+	D20_1610_KBC1,
+	D19_1610_KBC2,
+	E18_1610_KBC3,
+	C21_1610_KBC4,
+	G18_1610_KBR0,
+	F19_1610_KBR1,
+	H14_1610_KBR2,
+	E20_1610_KBR3,
+	E19_1610_KBR4,
+	N19_1610_KBR5,
+
+	/* Power management */
+	T20_1610_LOW_PWR,
+
+	/* MCLK Settings */
+	V5_1710_MCLK_ON,
+	V5_1710_MCLK_OFF,
+	R10_1610_MCLK_ON,
+	R10_1610_MCLK_OFF,
+
+	/* CompactFlash controller */
+	P11_1610_CF_CD2,
+	R11_1610_CF_IOIS16,
+	V10_1610_CF_IREQ,
+	W10_1610_CF_RESET,
+	W11_1610_CF_CD1,
+
+	/* parallel camera */
+	J15_1610_CAM_LCLK,
+	J18_1610_CAM_D7,
+	J19_1610_CAM_D6,
+	J14_1610_CAM_D5,
+	K18_1610_CAM_D4,
+	K19_1610_CAM_D3,
+	K15_1610_CAM_D2,
+	K14_1610_CAM_D1,
+	L19_1610_CAM_D0,
+	L18_1610_CAM_VS,
+	L15_1610_CAM_HS,
+	M19_1610_CAM_RSTZ,
+	Y15_1610_CAM_OUTCLK,
+
+	/* serial camera */
+	H19_1610_CAM_EXCLK,
+	Y12_1610_CCP_CLKP,
+	W13_1610_CCP_CLKM,
+	W14_1610_CCP_DATAP,
+	Y14_1610_CCP_DATAM,
+
+};
+
+struct omap_mux_cfg {
+	struct pin_config	*pins;
+	unsigned long		size;
+	int			(*cfg_reg)(const struct pin_config *cfg);
+};
+
+#ifdef	CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
+extern int omap1_mux_init(void);
+extern int omap_mux_register(struct omap_mux_cfg *);
+extern int omap_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap1_mux_init(void) { return 0; }
+static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+extern int omap2_mux_init(void);
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h
new file mode 100644
index 000000000000..8fe05d6137c0
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/omap1510.h
@@ -0,0 +1,49 @@
+/*
+ * Hardware definitions for TI OMAP1510 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_H
+#define __ASM_ARCH_OMAP15XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP1510_DSP_BASE	0xE0000000
+#define OMAP1510_DSP_SIZE	0x28000
+#define OMAP1510_DSP_START	0xE0000000
+
+#define OMAP1510_DSPREG_BASE	0xE1000000
+#define OMAP1510_DSPREG_SIZE	SZ_128K
+#define OMAP1510_DSPREG_START	0xE1000000
+
+#define OMAP1510_DSP_MMU_BASE	(0xfffed200)
+
+#endif /*  __ASM_ARCH_OMAP15XX_H */
+
diff --git a/arch/arm/mach-omap1/include/mach/omap16xx.h b/arch/arm/mach-omap1/include/mach/omap16xx.h
new file mode 100644
index 000000000000..cd1c724869c7
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/omap16xx.h
@@ -0,0 +1,201 @@
+/*
+ * Hardware definitions for TI OMAP1610/5912/1710 processors.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP16XX_H
+#define __ASM_ARCH_OMAP16XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP16XX_DSP_BASE	0xE0000000
+#define OMAP16XX_DSP_SIZE	0x28000
+#define OMAP16XX_DSP_START	0xE0000000
+
+#define OMAP16XX_DSPREG_BASE	0xE1000000
+#define OMAP16XX_DSPREG_SIZE	SZ_128K
+#define OMAP16XX_DSPREG_START	0xE1000000
+
+#define OMAP16XX_SEC_BASE	0xFFFE4000
+#define OMAP16XX_SEC_DES	(OMAP16XX_SEC_BASE + 0x0000)
+#define OMAP16XX_SEC_SHA1MD5	(OMAP16XX_SEC_BASE + 0x0800)
+#define OMAP16XX_SEC_RNG	(OMAP16XX_SEC_BASE + 0x1000)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_IH2_0_BASE		(0xfffe0000)
+#define OMAP_IH2_1_BASE		(0xfffe0100)
+#define OMAP_IH2_2_BASE		(0xfffe0200)
+#define OMAP_IH2_3_BASE		(0xfffe0300)
+
+#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
+#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
+#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
+#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
+#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
+#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
+#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)
+
+#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
+#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
+#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
+#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
+#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
+#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
+#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)
+
+#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
+#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
+#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
+#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
+#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
+#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
+#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)
+
+#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
+#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
+#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
+#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
+#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
+#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
+#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_ARM_IDLECT3	(CLKGEN_REG_BASE + 0x24)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV6	(1 << 8)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV7	(1 << 9)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV8	(1 << 10)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV9	(1 << 11)
+#define OMAP16XX_SUBLVDS_CONF_VALID	(1 << 13)
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP1610_RESET_CONTROL  0xfffe1140
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_SWITCH_BASE		 (0xfffbc800)
+#define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
+
+/* UART3 Registers Mapping through MPU bus */
+#define UART3_RHR               (OMAP1_UART3_BASE + 0)
+#define UART3_THR               (OMAP1_UART3_BASE + 0)
+#define UART3_DLL               (OMAP1_UART3_BASE + 0)
+#define UART3_IER               (OMAP1_UART3_BASE + 4)
+#define UART3_DLH               (OMAP1_UART3_BASE + 4)
+#define UART3_IIR               (OMAP1_UART3_BASE + 8)
+#define UART3_FCR               (OMAP1_UART3_BASE + 8)
+#define UART3_EFR               (OMAP1_UART3_BASE + 8)
+#define UART3_LCR               (OMAP1_UART3_BASE + 0x0C)
+#define UART3_MCR               (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON1_ADDR1        (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON2_ADDR2        (OMAP1_UART3_BASE + 0x14)
+#define UART3_LSR               (OMAP1_UART3_BASE + 0x14)
+#define UART3_TCR               (OMAP1_UART3_BASE + 0x18)
+#define UART3_MSR               (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF1             (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF2             (OMAP1_UART3_BASE + 0x1C)
+#define UART3_SPR               (OMAP1_UART3_BASE + 0x1C)
+#define UART3_TLR               (OMAP1_UART3_BASE + 0x1C)
+#define UART3_MDR1              (OMAP1_UART3_BASE + 0x20)
+#define UART3_MDR2              (OMAP1_UART3_BASE + 0x24)
+#define UART3_SFLSR             (OMAP1_UART3_BASE + 0x28)
+#define UART3_TXFLL             (OMAP1_UART3_BASE + 0x28)
+#define UART3_RESUME            (OMAP1_UART3_BASE + 0x2C)
+#define UART3_TXFLH             (OMAP1_UART3_BASE + 0x2C)
+#define UART3_SFREGL            (OMAP1_UART3_BASE + 0x30)
+#define UART3_RXFLL             (OMAP1_UART3_BASE + 0x30)
+#define UART3_SFREGH            (OMAP1_UART3_BASE + 0x34)
+#define UART3_RXFLH             (OMAP1_UART3_BASE + 0x34)
+#define UART3_BLR               (OMAP1_UART3_BASE + 0x38)
+#define UART3_ACREG             (OMAP1_UART3_BASE + 0x3C)
+#define UART3_DIV16             (OMAP1_UART3_BASE + 0x3C)
+#define UART3_SCR               (OMAP1_UART3_BASE + 0x40)
+#define UART3_SSR               (OMAP1_UART3_BASE + 0x44)
+#define UART3_EBLR              (OMAP1_UART3_BASE + 0x48)
+#define UART3_OSC_12M_SEL       (OMAP1_UART3_BASE + 0x4C)
+#define UART3_MVR               (OMAP1_UART3_BASE + 0x50)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* 32-bit Watchdog timer in OMAP 16XX */
+#define OMAP_16XX_WATCHDOG_BASE        (0xfffeb000)
+#define OMAP_16XX_WIDR         (OMAP_16XX_WATCHDOG_BASE + 0x00)
+#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
+#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
+#define OMAP_16XX_WCLR         (OMAP_16XX_WATCHDOG_BASE + 0x24)
+#define OMAP_16XX_WCRR         (OMAP_16XX_WATCHDOG_BASE + 0x28)
+#define OMAP_16XX_WLDR         (OMAP_16XX_WATCHDOG_BASE + 0x2c)
+#define OMAP_16XX_WTGR         (OMAP_16XX_WATCHDOG_BASE + 0x30)
+#define OMAP_16XX_WWPS         (OMAP_16XX_WATCHDOG_BASE + 0x34)
+#define OMAP_16XX_WSPR         (OMAP_16XX_WATCHDOG_BASE + 0x48)
+
+#define WCLR_PRE_SHIFT         5
+#define WCLR_PTV_SHIFT         2
+
+#define WWPS_W_PEND_WSPR       (1 << 4)
+#define WWPS_W_PEND_WTGR       (1 << 3)
+#define WWPS_W_PEND_WLDR       (1 << 2)
+#define WWPS_W_PEND_WCRR       (1 << 1)
+#define WWPS_W_PEND_WCLR       (1 << 0)
+
+#define WSPR_ENABLE_0          (0x0000bbbb)
+#define WSPR_ENABLE_1          (0x00004444)
+#define WSPR_DISABLE_0         (0x0000aaaa)
+#define WSPR_DISABLE_1         (0x00005555)
+
+#define OMAP16XX_DSP_MMU_BASE	(0xfffed200)
+#define OMAP16XX_MAILBOX_BASE	(0xfffcf000)
+
+#endif /*  __ASM_ARCH_OMAP16XX_H */
+
diff --git a/arch/arm/mach-omap1/include/mach/omap7xx.h b/arch/arm/mach-omap1/include/mach/omap7xx.h
new file mode 100644
index 000000000000..63da994bc609
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/omap7xx.h
@@ -0,0 +1,106 @@
+/*
+ * Hardware definitions for TI OMAP7XX processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
+ * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP7XX_H
+#define __ASM_ARCH_OMAP7XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP7XX_DSP_BASE	0xE0000000
+#define OMAP7XX_DSP_SIZE	0x50000
+#define OMAP7XX_DSP_START	0xE0000000
+
+#define OMAP7XX_DSPREG_BASE	0xE1000000
+#define OMAP7XX_DSPREG_SIZE	SZ_128K
+#define OMAP7XX_DSPREG_START	0xE1000000
+
+#define OMAP7XX_SPI1_BASE	0xfffc0800
+#define OMAP7XX_SPI2_BASE	0xfffc1000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_CONFIG_BASE	0xfffe1000
+#define OMAP7XX_IO_CONF_0	0xfffe1070
+#define OMAP7XX_IO_CONF_1	0xfffe1074
+#define OMAP7XX_IO_CONF_2	0xfffe1078
+#define OMAP7XX_IO_CONF_3	0xfffe107c
+#define OMAP7XX_IO_CONF_4	0xfffe1080
+#define OMAP7XX_IO_CONF_5	0xfffe1084
+#define OMAP7XX_IO_CONF_6	0xfffe1088
+#define OMAP7XX_IO_CONF_7	0xfffe108c
+#define OMAP7XX_IO_CONF_8	0xfffe1090
+#define OMAP7XX_IO_CONF_9	0xfffe1094
+#define OMAP7XX_IO_CONF_10	0xfffe1098
+#define OMAP7XX_IO_CONF_11	0xfffe109c
+#define OMAP7XX_IO_CONF_12	0xfffe10a0
+#define OMAP7XX_IO_CONF_13	0xfffe10a4
+
+#define OMAP7XX_MODE_1		0xfffe1010
+#define OMAP7XX_MODE_2		0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP7XX_MODE2_OFFSET	0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_FLASH_CFG_0	0xfffecc10
+#define OMAP7XX_FLASH_ACFG_0	0xfffecc50
+#define OMAP7XX_FLASH_CFG_1	0xfffecc14
+#define OMAP7XX_FLASH_ACFG_1	0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_ICR_BASE	0xfffbb800
+#define OMAP7XX_DSP_M_CTL	0xfffbb804
+#define OMAP7XX_DSP_MMU_BASE	0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_PCC_UPLD_CTRL_BASE	(0xfffe0900)
+#define OMAP7XX_PCC_UPLD_CTRL		(OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /*  __ASM_ARCH_OMAP7XX_H */
+
diff --git a/arch/arm/mach-omap1/include/mach/smp.h b/arch/arm/mach-omap1/include/mach/smp.h
deleted file mode 100644
index 80a371c06e59..000000000000
--- a/arch/arm/mach-omap1/include/mach/smp.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/smp.h
- */
-
-#include <plat/smp.h>