ARM: msm: Rework timer binding to be more general

The msm timer binding I wrote is bad. First off, the clock
frequency in the binding for the dgt is wrong. Software divides
down the input rate by 4 to achieve the rate listed in the
binding. We also treat each individual timer as a separate
hardware component, when in reality there is one timer block
(that may be duplicated per cpu) with multiple timers within it.
Depending on the version of the hardware there can be one or two
general purpose timers, status and divider control registers, and
an entirely different register layout.

In the next patch we'll need to know about the different register
layouts so that we can properly check the status register after
clearing the count. The current binding makes this complicated
because the general purpose timer's reg property doesn't indicate
where that status register is, and in fact it is beyond the size
of the reg property.

Clean all this up by just having one node for the timer hardware,
and describe all the interrupts and clock frequencies supported
while having one reg property that covers the entire timer
register region. We'll use the compatible field in the future to
determine different register layouts and if we should read the
status registers, etc.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>

1 files changed, 33 insertions, 46 deletions

diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 2969027f02fa..165e33b9b1ee 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -36,6 +36,7 @@
 #define TIMER_ENABLE_CLR_ON_MATCH_EN    BIT(1)
 #define TIMER_ENABLE_EN                 BIT(0)
 #define TIMER_CLEAR             0x000C
+#define DGT_CLK_CTL		0x10
 #define DGT_CLK_CTL_DIV_4	0x3
 
 #define GPT_HZ 32768
@@ -214,13 +215,9 @@ err:
 }
 
 #ifdef CONFIG_OF
-static const struct of_device_id msm_dgt_match[] __initconst = {
-	{ .compatible = "qcom,msm-dgt" },
-	{ },
-};
-
-static const struct of_device_id msm_gpt_match[] __initconst = {
-	{ .compatible = "qcom,msm-gpt" },
+static const struct of_device_id msm_timer_match[] __initconst = {
+	{ .compatible = "qcom,kpss-timer" },
+	{ .compatible = "qcom,scss-timer" },
 	{ },
 };
 
@@ -231,33 +228,29 @@ void __init msm_dt_timer_init(void)
 	int irq;
 	struct resource res;
 	u32 percpu_offset;
-	void __iomem *dgt_clk_ctl;
+	void __iomem *base;
+	void __iomem *cpu0_base;
 
-	np = of_find_matching_node(NULL, msm_gpt_match);
+	np = of_find_matching_node(NULL, msm_timer_match);
 	if (!np) {
-		pr_err("Can't find GPT DT node\n");
+		pr_err("Can't find msm timer DT node\n");
 		return;
 	}
 
-	event_base = of_iomap(np, 0);
-	if (!event_base) {
+	base = of_iomap(np, 0);
+	if (!base) {
 		pr_err("Failed to map event base\n");
 		return;
 	}
 
-	irq = irq_of_parse_and_map(np, 0);
+	/* We use GPT0 for the clockevent */
+	irq = irq_of_parse_and_map(np, 1);
 	if (irq <= 0) {
 		pr_err("Can't get irq\n");
 		return;
 	}
-	of_node_put(np);
-
-	np = of_find_matching_node(NULL, msm_dgt_match);
-	if (!np) {
-		pr_err("Can't find DGT DT node\n");
-		return;
-	}
 
+	/* We use CPU0's DGT for the clocksource */
 	if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
 		percpu_offset = 0;
 
@@ -266,45 +259,39 @@ void __init msm_dt_timer_init(void)
 		return;
 	}
 
-	source_base = ioremap(res.start + percpu_offset, resource_size(&res));
-	if (!source_base) {
+	cpu0_base = ioremap(res.start + percpu_offset, resource_size(&res));
+	if (!cpu0_base) {
 		pr_err("Failed to map source base\n");
 		return;
 	}
 
-	if (!of_address_to_resource(np, 1, &res)) {
-		dgt_clk_ctl = ioremap(res.start + percpu_offset,
-				      resource_size(&res));
-		if (!dgt_clk_ctl) {
-			pr_err("Failed to map DGT control base\n");
-			return;
-		}
-		writel_relaxed(DGT_CLK_CTL_DIV_4, dgt_clk_ctl);
-		iounmap(dgt_clk_ctl);
-	}
-
 	if (of_property_read_u32(np, "clock-frequency", &freq)) {
 		pr_err("Unknown frequency\n");
 		return;
 	}
 	of_node_put(np);
 
+	event_base = base + 0x4;
+	source_base = cpu0_base + 0x24;
+	freq /= 4;
+	writel_relaxed(DGT_CLK_CTL_DIV_4, source_base + DGT_CLK_CTL);
+
 	msm_timer_init(freq, 32, irq, !!percpu_offset);
 }
 #endif
 
-static int __init msm_timer_map(phys_addr_t event, phys_addr_t source)
+static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source)
 {
-	event_base = ioremap(event, SZ_64);
-	if (!event_base) {
-		pr_err("Failed to map event base\n");
-		return 1;
-	}
-	source_base = ioremap(source, SZ_64);
-	if (!source_base) {
-		pr_err("Failed to map source base\n");
-		return 1;
+	void __iomem *base;
+
+	base = ioremap(addr, SZ_256);
+	if (!base) {
+		pr_err("Failed to map timer base\n");
+		return -ENOMEM;
 	}
+	event_base = base + event;
+	source_base = base + source;
+
 	return 0;
 }
 
@@ -312,7 +299,7 @@ void __init msm7x01_timer_init(void)
 {
 	struct clocksource *cs = &msm_clocksource;
 
-	if (msm_timer_map(0xc0100000, 0xc0100010))
+	if (msm_timer_map(0xc0100000, 0x0, 0x10))
 		return;
 	cs->read = msm_read_timer_count_shift;
 	cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
@@ -323,14 +310,14 @@ void __init msm7x01_timer_init(void)
 
 void __init msm7x30_timer_init(void)
 {
-	if (msm_timer_map(0xc0100004, 0xc0100024))
+	if (msm_timer_map(0xc0100000, 0x4, 0x24))
 		return;
 	msm_timer_init(24576000 / 4, 32, 1, false);
 }
 
 void __init qsd8x50_timer_init(void)
 {
-	if (msm_timer_map(0xAC100000, 0xAC100010))
+	if (msm_timer_map(0xAC100000, 0x0, 0x10))
 		return;
 	msm_timer_init(19200000 / 4, 32, 7, false);
 }