summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-kirkwood
diff options
context:
space:
mode:
authorAndrew Lunn <andrew@lunn.ch>2014-02-22 20:14:47 +0100
committerJason Cooper <jason@lakedaemon.net>2014-02-22 20:40:42 +0000
commitdab7dfb6c0e23d5fab56824e40795872c13afc1c (patch)
treeed9475f7252742436383b4cc3e00d8ba8fcc1e57 /arch/arm/mach-kirkwood
parent15a705ec849829be7866a989a52dbd56e498e760 (diff)
downloadblackbird-op-linux-dab7dfb6c0e23d5fab56824e40795872c13afc1c.tar.gz
blackbird-op-linux-dab7dfb6c0e23d5fab56824e40795872c13afc1c.zip
ARM: kirkwood: Separate board-dt from common and pcie code.
In order to be able to move DT support into mach-mvebu, the DT code needs to be cleanly separated from common and pcie code. Import the needed bits of these files into board-dt.c. The "common" code then becomes purely legacy, supporting non-DT boards, so reflect this in the Makefile targets. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Diffstat (limited to 'arch/arm/mach-kirkwood')
-rw-r--r--arch/arm/mach-kirkwood/Makefile3
-rw-r--r--arch/arm/mach-kirkwood/board-dt.c88
2 files changed, 88 insertions, 3 deletions
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index dc22bf5b21ed..3a72c5c6e747 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -1,5 +1,4 @@
-obj-y += common.o pcie.o
-obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o
+obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o common.o pcie.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index a0c0ff39788e..64151a4a378f 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -21,11 +21,97 @@
#include <linux/irqchip.h>
#include <linux/kexec.h>
#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
#include <mach/bridge-regs.h>
#include <plat/common.h>
-#include "common.h"
+#include <plat/cache-feroceon-l2.h>
+#include <plat/pcie.h>
#include "pm.h"
+static struct map_desc kirkwood_io_desc[] __initdata = {
+ {
+ .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
+ .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
+ .length = KIRKWOOD_REGS_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init kirkwood_map_io(void)
+{
+ iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
+}
+
+static void __init kirkwood_l2_init(void)
+{
+#ifdef CONFIG_CACHE_FEROCEON_L2
+#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
+ writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
+ feroceon_l2_init(1);
+#else
+ writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
+ feroceon_l2_init(0);
+#endif
+#endif
+}
+
+static struct resource kirkwood_cpufreq_resources[] = {
+ [0] = {
+ .start = CPU_CONTROL_PHYS,
+ .end = CPU_CONTROL_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device kirkwood_cpufreq_device = {
+ .name = "kirkwood-cpufreq",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources),
+ .resource = kirkwood_cpufreq_resources,
+};
+
+static void __init kirkwood_cpufreq_init(void)
+{
+ platform_device_register(&kirkwood_cpufreq_device);
+}
+
+static struct resource kirkwood_cpuidle_resource[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = DDR_OPERATION_BASE,
+ .end = DDR_OPERATION_BASE + 3,
+ },
+};
+
+static struct platform_device kirkwood_cpuidle = {
+ .name = "kirkwood_cpuidle",
+ .id = -1,
+ .resource = kirkwood_cpuidle_resource,
+ .num_resources = 1,
+};
+
+static void __init kirkwood_cpuidle_init(void)
+{
+ platform_device_register(&kirkwood_cpuidle);
+}
+
+/* Temporary here since mach-mvebu has a function we can use */
+static void kirkwood_restart(enum reboot_mode mode, const char *cmd)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
#define MV643XX_ETH_MAC_ADDR_LOW 0x0414
#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418
OpenPOWER on IntegriCloud