ARM: at91: change board files into SoC files

As board files are now DT only and can address all aspects of the SoC family,
we can rename them so that the mach-at91 directory looks cleaner.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

1 files changed, 0 insertions, 113 deletions

diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
deleted file mode 100644
index f9a1b0261f72..000000000000
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- *  Setup code for SAMA5 Evaluation Kits with Device Tree support
- *
- *  Copyright (C) 2013 Atmel,
- *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/micrel_phy.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/phy.h>
-#include <linux/clk-provider.h>
-#include <linux/phy.h>
-
-#include <mach/hardware.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "generic.h"
-
-static int ksz8081_phy_fixup(struct phy_device *phy)
-{
-	int value;
-
-	value = phy_read(phy, 0x16);
-	value &= ~0x20;
-	phy_write(phy, 0x16, value);
-
-	return 0;
-}
-
-static void __init sama5_dt_device_init(void)
-{
-	if (of_machine_is_compatible("atmel,sama5d4ek") &&
-	   IS_ENABLED(CONFIG_PHYLIB)) {
-		phy_register_fixup_for_id("fc028000.etherne:00",
-						ksz8081_phy_fixup);
-	}
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	at91_sam9x5_pm_init();
-}
-
-static const char *sama5_dt_board_compat[] __initconst = {
-	"atmel,sama5",
-	NULL
-};
-
-DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)")
-	/* Maintainer: Atmel */
-	.map_io		= at91_map_io,
-	.init_early	= at91_dt_initialize,
-	.init_machine	= sama5_dt_device_init,
-	.dt_compat	= sama5_dt_board_compat,
-MACHINE_END
-
-static struct map_desc at91_io_desc[] __initdata = {
-	{
-	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC),
-	.pfn            = __phys_to_pfn(SAMA5D4_BASE_MPDDRC),
-	.length         = SZ_512,
-	.type           = MT_DEVICE,
-	},
-	{
-	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC),
-	.pfn            = __phys_to_pfn(SAMA5D4_BASE_PMC),
-	.length         = SZ_512,
-	.type           = MT_DEVICE,
-	},
-	{ /* On sama5d4, we use USART3 as serial console */
-	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3),
-	.pfn            = __phys_to_pfn(SAMA5D4_BASE_USART3),
-	.length         = SZ_256,
-	.type           = MT_DEVICE,
-	},
-	{ /* A bunch of peripheral with fine grained IO space */
-	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2),
-	.pfn            = __phys_to_pfn(SAMA5D4_BASE_SYS2),
-	.length         = SZ_2K,
-	.type           = MT_DEVICE,
-	},
-};
-
-static void __init sama5_alt_map_io(void)
-{
-	at91_alt_map_io();
-	iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc));
-}
-
-static const char *sama5_alt_dt_board_compat[] __initconst = {
-	"atmel,sama5d4",
-	NULL
-};
-
-DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5 (Device Tree)")
-	/* Maintainer: Atmel */
-	.map_io		= sama5_alt_map_io,
-	.init_early	= at91_dt_initialize,
-	.init_machine	= sama5_dt_device_init,
-	.dt_compat	= sama5_alt_dt_board_compat,
-	.l2c_aux_mask	= ~0UL,
-MACHINE_END