Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "These changes from 30 individual branches for the most part update
  device tree files, but there are also a few source code changes that
  have crept in this time, usually in order to atomically move over a
  driver from using hardcoded data to DT probing.

  A number of platforms change their DT files to use the C preprocessor,
  which is causing a bit of churn, but that is hopefully only this once"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits)
  ARM: at91: dt: rm9200ek: add spi support
  ARM: at91: dt: rm9200: add spi support
  ARM: at91/DT: at91sam9n12: add SPI DMA client infos
  ARM: at91/DT: sama5d3: add SPI DMA client infos
  ARM: at91/DT: fix SPI compatibility string
  ARM: Kirkwood: Fix the internal register ranges translation
  ARM: dts: bcm281xx: change comment to C89 style
  ARM: mmc: bcm281xx SDHCI driver (dt mods)
  ARM: nomadik: add the new clocks to the device tree
  clk: nomadik: implement the Nomadik clocks properly
  ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
  ARM: dts: omap4-panda: Fix DVI EDID reads
  ARM: dts: omap4-panda: Add USB Host support
  arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
  ARM: shmobile: irqpin: add a DT property to enable masking on parent
  ARM: dts: AM43x EPOS EVM support
  ARM: dts: OMAP5: Add bandgap DT entry
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ...

1 files changed, 11 insertions, 8 deletions

diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index 3c24c9b92b44..ea078ab8edeb 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi"
 
 / {
 	model = "NVIDIA Tegra20 Whistler evaluation board";
@@ -18,7 +18,8 @@
 			pll-supply = <&hdmi_pll_reg>;
 
 			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -281,7 +282,7 @@
 		max8907@3c {
 			compatible = "maxim,max8907";
 			reg = <0x3c>;
-			interrupts = <0 86 0x4>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			maxim,system-power-controller;
 
@@ -508,7 +509,7 @@
 
 	usb@c5000000 {
 		status = "okay";
-		nvidia,vbus-gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
+		nvidia,vbus-gpio = <&tca6416 0 GPIO_ACTIVE_HIGH>;
 	};
 
 	usb-phy@c5000000 {
@@ -518,7 +519,7 @@
 
 	usb@c5008000 {
 		status = "okay";
-		nvidia,vbus-gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
+		nvidia,vbus-gpio = <&tca6416 1 GPIO_ACTIVE_HIGH>;
 	};
 
 	usb-phy@c5008000 {
@@ -528,8 +529,8 @@
 
 	sdhci@c8000400 {
 		status = "okay";
-		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
-		wp-gpios = <&gpio 173 0>; /* gpio PV5 */
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
 		bus-width = <8>;
 	};
 
@@ -612,7 +613,9 @@
 		nvidia,i2s-controller = <&tegra_i2s1>;
 		nvidia,audio-codec = <&codec>;
 
-		clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };