diff options
| author | Tony Lindgren <tony@atomide.com> | 2016-09-11 21:01:02 -0700 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2016-09-13 14:56:30 -0700 |
| commit | 08f9268b2a2e16ad89187a49ac06bfc7e1dc36a6 (patch) | |
| tree | 36b250f5ca47a60b8b17898cb3793ee3491d12f4 /arch/arm/boot/dts/omap5-board-common.dtsi | |
| parent | 84ae49747fe2e2fe47f722f3f6656b2545a6d1ae (diff) | |
| download | blackbird-op-linux-08f9268b2a2e16ad89187a49ac06bfc7e1dc36a6.tar.gz blackbird-op-linux-08f9268b2a2e16ad89187a49ac06bfc7e1dc36a6.zip | |
ARM: dts: ARM: dts: Fix omap5 SDIO dat1 interrupt
Few changes to fix issues I've noticed while debugging omap5-uevm
wl18xx issues:
1. Move wlcore irq pin muxing under wlcore. This irq could be
different from gpio_wk14 on some board variants
2. Don't configure pull on wlcore irq pin. There is a 10k
pull up resistor R105 on the device to VDDS_1v8_MAIN
3. The padconf register for wlsdio_data1 is wrong, it's really
at 0x1a8 + 2 - 0x40 = 0x16a offset, not at 0x168 as that's
for wlsdio_data0
4. Mark the omap5-uevm wlan as compatible with ti,wl1837 as
that's what the TDK R078 part seems to be
5. The MMC interrupt for WLAN musb be wakeupgen, not gic
Looks like omap5-uevm WLAN behaves better now, but I still seem
to have issues with some access points.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/boot/dts/omap5-board-common.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/omap5-board-common.dtsi | 10 |
1 files changed, 6 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index d1f5ce3d3651..cb3247f19b9f 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -332,7 +332,7 @@ wlcore_irq_pin: pinmux_wlcore_irq_pin { pinctrl-single,pins = < - OMAP5_IOPAD(0x40, PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ + OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ >; }; }; @@ -355,15 +355,17 @@ non-removable; cap-power-off-card; pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins &wlcore_irq_pin>; - interrupts-extended = <&gic GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH - &omap5_pmx_core 0x168>; + pinctrl-0 = <&mmc3_pins>; + interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH + &omap5_pmx_core 0x16a>; #address-cells = <1>; #size-cells = <0>; wlcore: wlcore@2 { compatible = "ti,wl1271"; reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&wlcore_irq_pin>; interrupt-parent = <&gpio1>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ ref-clock-frequency = <26000000>; |
