Merge 3.12-rc6 into driver-core-next

We want these fixes here too.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

11 files changed, 71 insertions, 213 deletions

diff --git a/Documentation/ABI/stable/sysfs-bus-usb b/Documentation/ABI/stable/sysfs-bus-usb
index 2be603c52a24..a6b685724740 100644
--- a/Documentation/ABI/stable/sysfs-bus-usb
+++ b/Documentation/ABI/stable/sysfs-bus-usb
@@ -37,8 +37,8 @@ Description:
 		that the USB device has been connected to the machine.  This
 		file is read-only.
 Users:
-		PowerTOP <power@bughost.org>
-		http://www.lesswatts.org/projects/powertop/
+		PowerTOP <powertop@lists.01.org>
+		https://01.org/powertop/
 
 What:		/sys/bus/usb/device/.../power/active_duration
 Date:		January 2008
@@ -57,8 +57,8 @@ Description:
 		will give an integer percentage.  Note that this does not
 		account for counter wrap.
 Users:
-		PowerTOP <power@bughost.org>
-		http://www.lesswatts.org/projects/powertop/
+		PowerTOP <powertop@lists.01.org>
+		https://01.org/powertop/
 
 What:		/sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend
 Date:		January 2008
diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power
index 9d43e7670841..efe449bdf811 100644
--- a/Documentation/ABI/testing/sysfs-devices-power
+++ b/Documentation/ABI/testing/sysfs-devices-power
@@ -1,6 +1,6 @@
 What:		/sys/devices/.../power/
 Date:		January 2009
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../power directory contains attributes
 		allowing the user space to check and modify some power
@@ -8,7 +8,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup
 Date:		January 2009
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../power/wakeup attribute allows the user
 		space to check if the device is enabled to wake up the system
@@ -34,7 +34,7 @@ Description:
 
 What:		/sys/devices/.../power/control
 Date:		January 2009
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../power/control attribute allows the user
 		space to control the run-time power management of the device.
@@ -53,7 +53,7 @@ Description:
 
 What:		/sys/devices/.../power/async
 Date:		January 2009
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../async attribute allows the user space to
 		enable or diasble the device's suspend and resume callbacks to
@@ -79,7 +79,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_count
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_count attribute contains the number
 		of signaled wakeup events associated with the device.  This
@@ -88,7 +88,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_active_count
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_active_count attribute contains the
 		number of times the processing of wakeup events associated with
@@ -98,7 +98,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_abort_count
 Date:		February 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_abort_count attribute contains the
 		number of times the processing of a wakeup event associated with
@@ -109,7 +109,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_expire_count
 Date:		February 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_expire_count attribute contains the
 		number of times a wakeup event associated with the device has
@@ -119,7 +119,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_active
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_active attribute contains either 1,
 		or 0, depending on whether or not a wakeup event associated with
@@ -129,7 +129,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_total_time_ms
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_total_time_ms attribute contains
 		the total time of processing wakeup events associated with the
@@ -139,7 +139,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_max_time_ms
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_max_time_ms attribute contains
 		the maximum time of processing a single wakeup event associated
@@ -149,7 +149,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_last_time_ms
 Date:		September 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_last_time_ms attribute contains
 		the value of the monotonic clock corresponding to the time of
@@ -160,7 +160,7 @@ Description:
 
 What:		/sys/devices/.../power/wakeup_prevent_sleep_time_ms
 Date:		February 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute
 		contains the total time the device has been preventing
@@ -189,7 +189,7 @@ Description:
 
 What:		/sys/devices/.../power/pm_qos_latency_us
 Date:		March 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../power/pm_qos_resume_latency_us attribute
 		contains the PM QoS resume latency limit for the given device,
@@ -207,7 +207,7 @@ Description:
 
 What:		/sys/devices/.../power/pm_qos_no_power_off
 Date:		September 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../power/pm_qos_no_power_off attribute
 		is used for manipulating the PM QoS "no power off" flag.  If
@@ -222,7 +222,7 @@ Description:
 
 What:		/sys/devices/.../power/pm_qos_remote_wakeup
 Date:		September 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/devices/.../power/pm_qos_remote_wakeup attribute
 		is used for manipulating the PM QoS "remote wakeup required"
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
index 217772615d02..205a73878441 100644
--- a/Documentation/ABI/testing/sysfs-power
+++ b/Documentation/ABI/testing/sysfs-power
@@ -1,6 +1,6 @@
 What:		/sys/power/
 Date:		August 2006
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power directory will contain files that will
 		provide a unified interface to the power management
@@ -8,7 +8,7 @@ Description:
 
 What:		/sys/power/state
 Date:		August 2006
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/state file controls the system power state.
 		Reading from this file returns what states are supported,
@@ -22,7 +22,7 @@ Description:
 
 What:		/sys/power/disk
 Date:		September 2006
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/disk file controls the operating mode of the
 		suspend-to-disk mechanism.  Reading from this file returns
@@ -67,7 +67,7 @@ Description:
 
 What:		/sys/power/image_size
 Date:		August 2006
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/image_size file controls the size of the image
 		created by the suspend-to-disk mechanism.  It can be written a
@@ -84,7 +84,7 @@ Description:
 
 What:		/sys/power/pm_trace
 Date:		August 2006
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/pm_trace file controls the code which saves the
 		last PM event point in the RTC across reboots, so that you can
@@ -133,7 +133,7 @@ Description:
 
 What:		/sys/power/pm_async
 Date:		January 2009
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/pm_async file controls the switch allowing the
 		user space to enable or disable asynchronous suspend and resume
@@ -146,7 +146,7 @@ Description:
 
 What:		/sys/power/wakeup_count
 Date:		July 2010
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/wakeup_count file allows user space to put the
 		system into a sleep state while taking into account the
@@ -161,7 +161,7 @@ Description:
 
 What:		/sys/power/reserved_size
 Date:		May 2011
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/reserved_size file allows user space to control
 		the amount of memory reserved for allocations made by device
@@ -175,7 +175,7 @@ Description:
 
 What:		/sys/power/autosleep
 Date:		April 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/autosleep file can be written one of the strings
 		returned by reads from /sys/power/state.  If that happens, a
@@ -192,7 +192,7 @@ Description:
 
 What:		/sys/power/wake_lock
 Date:		February 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/wake_lock file allows user space to create
 		wakeup source objects and activate them on demand (if one of
@@ -219,7 +219,7 @@ Description:
 
 What:		/sys/power/wake_unlock
 Date:		February 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/wake_unlock file allows user space to deactivate
 		wakeup sources created with the help of /sys/power/wake_lock.
diff --git a/Documentation/acpi/dsdt-override.txt b/Documentation/acpi/dsdt-override.txt
index febbb1ba4d23..784841caa6e6 100644
--- a/Documentation/acpi/dsdt-override.txt
+++ b/Documentation/acpi/dsdt-override.txt
@@ -4,4 +4,4 @@ CONFIG_ACPI_CUSTOM_DSDT builds the image into the kernel.
 
 When to use this method is described in detail on the
 Linux/ACPI home page:
-http://www.lesswatts.org/projects/acpi/overridingDSDT.php
+https://01.org/linux-acpi/documentation/overriding-dsdt
diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX
index d18ecd827c40..929d9904f74b 100644
--- a/Documentation/block/00-INDEX
+++ b/Documentation/block/00-INDEX
@@ -6,6 +6,8 @@ capability.txt
 	- Generic Block Device Capability (/sys/block/<device>/capability)
 cfq-iosched.txt
 	- CFQ IO scheduler tunables
+cmdline-partition.txt
+	- how to specify block device partitions on kernel command line
 data-integrity.txt
 	- Block data integrity
 deadline-iosched.txt
diff --git a/Documentation/block/cmdline-partition.txt b/Documentation/block/cmdline-partition.txt
index 2bbf4cc40c3f..525b9f6d7fb4 100644
--- a/Documentation/block/cmdline-partition.txt
+++ b/Documentation/block/cmdline-partition.txt
@@ -1,9 +1,9 @@
-Embedded device command line partition
+Embedded device command line partition parsing
 =====================================================================
 
-Read block device partition table from command line.
-The partition used for fixed block device (eMMC) embedded device.
-It is no MBR, save storage space. Bootloader can be easily accessed
+Support for reading the block device partition table from the command line.
+It is typically used for fixed block (eMMC) embedded devices.
+It has no MBR, so saves storage space. Bootloader can be easily accessed
 by absolute address of data on the block device.
 Users can easily change the partition.
 
diff --git a/Documentation/devicetree/bindings/memory.txt b/Documentation/devicetree/bindings/memory.txt
deleted file mode 100644
index eb2469365593..000000000000
--- a/Documentation/devicetree/bindings/memory.txt
+++ /dev/null
@@ -1,168 +0,0 @@
-*** Memory binding ***
-
-The /memory node provides basic information about the address and size
-of the physical memory. This node is usually filled or updated by the
-bootloader, depending on the actual memory configuration of the given
-hardware.
-
-The memory layout is described by the following node:
-
-/ {
-	#address-cells = <(n)>;
-	#size-cells = <(m)>;
-	memory {
-		device_type = "memory";
-		reg =  <(baseaddr1) (size1)
-			(baseaddr2) (size2)
-			...
-			(baseaddrN) (sizeN)>;
-	};
-	...
-};
-
-A memory node follows the typical device tree rules for "reg" property:
-n:		number of cells used to store base address value
-m:		number of cells used to store size value
-baseaddrX:	defines a base address of the defined memory bank
-sizeX:		the size of the defined memory bank
-
-
-More than one memory bank can be defined.
-
-
-*** Reserved memory regions ***
-
-In /memory/reserved-memory node one can create child nodes describing
-particular reserved (excluded from normal use) memory regions. Such
-memory regions are usually designed for the special usage by various
-device drivers. A good example are contiguous memory allocations or
-memory sharing with other operating system on the same hardware board.
-Those special memory regions might depend on the board configuration and
-devices used on the target system.
-
-Parameters for each memory region can be encoded into the device tree
-with the following convention:
-
-[(label):] (name) {
-	compatible = "linux,contiguous-memory-region", "reserved-memory-region";
-	reg = <(address) (size)>;
-	(linux,default-contiguous-region);
-};
-
-compatible:	one or more of:
-	- "linux,contiguous-memory-region" - enables binding of this
-	  region to Contiguous Memory Allocator (special region for
-	  contiguous memory allocations, shared with movable system
-	  memory, Linux kernel-specific).
-	- "reserved-memory-region" - compatibility is defined, given
-	  region is assigned for exclusive usage for by the respective
-	  devices.
-
-reg:	standard property defining the base address and size of
-	the memory region
-
-linux,default-contiguous-region: property indicating that the region
-	is the default region for all contiguous memory
-	allocations, Linux specific (optional)
-
-It is optional to specify the base address, so if one wants to use
-autoconfiguration of the base address, '0' can be specified as a base
-address in the 'reg' property.
-
-The /memory/reserved-memory node must contain the same #address-cells
-and #size-cells value as the root node.
-
-
-*** Device node's properties ***
-
-Once regions in the /memory/reserved-memory node have been defined, they
-may be referenced by other device nodes. Bindings that wish to reference
-memory regions should explicitly document their use of the following
-property:
-
-memory-region = <&phandle_to_defined_region>;
-
-This property indicates that the device driver should use the memory
-region pointed by the given phandle.
-
-
-*** Example ***
-
-This example defines a memory consisting of 4 memory banks. 3 contiguous
-regions are defined for Linux kernel, one default of all device drivers
-(named contig_mem, placed at 0x72000000, 64MiB), one dedicated to the
-framebuffer device (labelled display_mem, placed at 0x78000000, 8MiB)
-and one for multimedia processing (labelled multimedia_mem, placed at
-0x77000000, 64MiB). 'display_mem' region is then assigned to fb@12300000
-device for DMA memory allocations (Linux kernel drivers will use CMA is
-available or dma-exclusive usage otherwise). 'multimedia_mem' is
-assigned to scaler@12500000 and codec@12600000 devices for contiguous
-memory allocations when CMA driver is enabled.
-
-The reason for creating a separate region for framebuffer device is to
-match the framebuffer base address to the one configured by bootloader,
-so once Linux kernel drivers starts no glitches on the displayed boot
-logo appears. Scaller and codec drivers should share the memory
-allocations.
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	/* ... */
-
-	memory {
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000
-			0x60000000 0x10000000
-			0x70000000 0x10000000>;
-
-		reserved-memory {
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/*
-			 * global autoconfigured region for contiguous allocations
-			 * (used only with Contiguous Memory Allocator)
-			 */
-			contig_region@0 {
-				compatible = "linux,contiguous-memory-region";
-				reg = <0x0 0x4000000>;
-				linux,default-contiguous-region;
-			};
-
-			/*
-			 * special region for framebuffer
-			 */
-			display_region: region@78000000 {
-				compatible = "linux,contiguous-memory-region", "reserved-memory-region";
-				reg = <0x78000000 0x800000>;
-			};
-
-			/*
-			 * special region for multimedia processing devices
-			 */
-			multimedia_region: region@77000000 {
-				compatible = "linux,contiguous-memory-region";
-				reg = <0x77000000 0x4000000>;
-			};
-		};
-	};
-
-	/* ... */
-
-	fb0: fb@12300000 {
-		status = "okay";
-		memory-region = <&display_region>;
-	};
-
-	scaler: scaler@12500000 {
-		status = "okay";
-		memory-region = <&multimedia_region>;
-	};
-
-	codec: codec@12600000 {
-		status = "okay";
-		memory-region = <&multimedia_region>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
index df204e18e030..6a2a1160a70d 100644
--- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
@@ -9,12 +9,15 @@ compulsory and any optional properties, common to all SD/MMC drivers, as
 described in mmc.txt, can be used. Additionally the following tmio_mmc-specific
 optional bindings can be used.
 
+Required properties:
+- compatible:	"renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit
+		"renesas,sdhi-sh7372" - SDHI IP on SH7372 SoC
+		"renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC
+		"renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC
+		"renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC
+		"renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC
+		"renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC
+		"renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC
+
 Optional properties:
 - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable
-
-When used with Renesas SDHI hardware, the following compatibility strings
-configure various model-specific properties:
-
-"renesas,sh7372-sdhi":	(default) compatible with SH7372
-"renesas,r8a7740-sdhi":	compatible with R8A7740: certain MMC/SD commands have to
-			wait for the interface to become idle.
diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
index 2c6be0377f55..d2ea4605d078 100644
--- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
@@ -86,6 +86,7 @@ General Properties:
 
 Clock Properties:
 
+  - fsl,cksel        Timer reference clock source.
   - fsl,tclk-period  Timer reference clock period in nanoseconds.
   - fsl,tmr-prsc     Prescaler, divides the output clock.
   - fsl,tmr-add      Frequency compensation value.
@@ -97,7 +98,7 @@ Clock Properties:
   clock. You must choose these carefully for the clock to work right.
   Here is how to figure good values:
 
-  TimerOsc     = system clock               MHz
+  TimerOsc     = selected reference clock   MHz
   tclk_period  = desired clock period       nanoseconds
   NominalFreq  = 1000 / tclk_period         MHz
   FreqDivRatio = TimerOsc / NominalFreq     (must be greater that 1.0)
@@ -114,6 +115,20 @@ Clock Properties:
   Pulse Per Second (PPS) signal, since this will be offered to the PPS
   subsystem to synchronize the Linux clock.
 
+  Reference clock source is determined by the value, which is holded
+  in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
+  value, which will be directly written in those bits, that is why,
+  according to reference manual, the next clock sources can be used:
+
+  <0> - external high precision timer reference clock (TSEC_TMR_CLK
+        input is used for this purpose);
+  <1> - eTSEC system clock;
+  <2> - eTSEC1 transmit clock;
+  <3> - RTC clock input.
+
+  When this attribute is not used, eTSEC system clock will serve as
+  IEEE 1588 timer reference clock.
+
 Example:
 
 	ptp_clock@24E00 {
@@ -121,6 +136,7 @@ Example:
 		reg = <0x24E00 0xB0>;
 		interrupts = <12 0x8 13 0x8>;
 		interrupt-parent = < &ipic >;
+		fsl,cksel       = <1>;
 		fsl,tclk-period = <10>;
 		fsl,tmr-prsc    = <100>;
 		fsl,tmr-add     = <0x999999A4>;
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 539a23631990..fcbb736d55fe 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -480,6 +480,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Format: <io>,<irq>,<mode>
 			See header of drivers/net/hamradio/baycom_ser_hdx.c.
 
+	blkdevparts=	Manual partition parsing of block device(s) for
+			embedded devices based on command line input.
+			See Documentation/block/cmdline-partition.txt
+
 	boot_delay=	Milliseconds to delay each printk during boot.
 			Values larger than 10 seconds (10000) are changed to
 			no delay (0).
@@ -1357,7 +1361,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			pages. In the event, a node is too small to have both
 			kernelcore and Movable pages, kernelcore pages will
 			take priority and other nodes will have a larger number
-			of kernelcore pages.  The Movable zone is used for the
+			of Movable pages.  The Movable zone is used for the
 			allocation of pages that may be reclaimed or moved
 			by the page migration subsystem.  This means that
 			HugeTLB pages may not be allocated from this zone.
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index f911e3656209..85c362d8ea34 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -28,6 +28,7 @@ ALC269/270/275/276/28x/29x
   alc269-dmic		Enable ALC269(VA) digital mic workaround
   alc271-dmic		Enable ALC271X digital mic workaround
   inv-dmic		Inverted internal mic workaround
+  headset-mic		Indicates a combined headset (headphone+mic) jack
   lenovo-dock   	Enables docking station I/O for some Lenovos
   dell-headset-multi	Headset jack, which can also be used as mic-in
   dell-headset-dock	Headset jack (without mic-in), and also dock I/O