Merge tag 'asoc-v3.15-3' into asoc-next

ASoC: Updates for v3.15

A few more updates for the merge window:

 - Fixes for the simple-card DAI format DT mess.
 - A new driver for Cirrus cs42xx8 devices.
 - DT support for a couple more devices.
 - A revert of a previous buggy fix for soc-pcm, plus a few more fixes
   and cleanups.

# gpg: Signature made Sun 23 Mar 2014 16:56:11 GMT using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

4 files changed, 136 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/sound/armada-370db-audio.txt b/Documentation/devicetree/bindings/sound/armada-370db-audio.txt
index 3893b4d15a20..bf984d238620 100644
--- a/Documentation/devicetree/bindings/sound/armada-370db-audio.txt
+++ b/Documentation/devicetree/bindings/sound/armada-370db-audio.txt
@@ -11,14 +11,17 @@ Mandatory properties:
  * marvell,audio-controller: a phandle that points to the audio
    controller of the Armada 370 SoC.
 
- * marvell,audio-codec: a phandle that points to the analog audio
-   codec connected to the Armada 370 SoC.
+ * marvell,audio-codec: a set of three phandles that points to:
+
+    1/ the analog audio codec connected to the Armada 370 SoC
+    2/ the S/PDIF transceiver
+    3/ the S/PDIF receiver
 
 Example:
 
 	sound {
 	      compatible = "marvell,a370db-audio";
 	      marvell,audio-controller = <&audio_controller>;
-	      marvell,audio-codec = <&audio_codec>;
+	      marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>;
 	      status = "okay";
 	};
diff --git a/Documentation/devicetree/bindings/sound/cs42xx8.txt b/Documentation/devicetree/bindings/sound/cs42xx8.txt
new file mode 100644
index 000000000000..f631fbca6284
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs42xx8.txt
@@ -0,0 +1,28 @@
+CS42448/CS42888 audio CODEC
+
+Required properties:
+
+  - compatible : must contain one of "cirrus,cs42448" and "cirrus,cs42888"
+
+  - reg : the I2C address of the device for I2C
+
+  - clocks : a list of phandles + clock-specifiers, one for each entry in
+    clock-names
+
+  - clock-names : must contain "mclk"
+
+  - VA-supply, VD-supply, VLS-supply, VLC-supply: power supplies for the device,
+    as covered in Documentation/devicetree/bindings/regulator/regulator.txt
+
+Example:
+
+codec: cs42888@48 {
+	compatible = "cirrus,cs42888";
+	reg = <0x48>;
+	clocks = <&codec_mclk 0>;
+	clock-names = "mclk";
+	VA-supply = <&reg_audio>;
+	VD-supply = <&reg_audio>;
+	VLS-supply = <&reg_audio>;
+	VLC-supply = <&reg_audio>;
+};
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
new file mode 100644
index 000000000000..7c6d33f29796
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -0,0 +1,96 @@
+Renesas R-Car sound
+
+Required properties:
+- compatible			: "renesas,rcar_sound-gen1" if generation1
+				  "renesas,rcar_sound-gen2" if generation2
+- reg				: Should contain the register physical address.
+				  required register is
+				   SRU/ADG/SSI      if generation1
+				   SRU/ADG/SSIU/SSI if generation2
+- rcar_sound,ssi		: SSI subnode
+- rcar_sound,scu		: SCU subnode
+- rcar_sound,dai		: DAI subnode
+
+SSI subnode properties:
+- interrupts			: Should contain SSI interrupt for PIO transfer
+- shared-pin			: if shared clock pin
+
+DAI subnode properties:
+- playback			: list of playback modules
+- capture			: list of capture  modules
+
+Example:
+
+rcar_sound: rcar_sound@0xffd90000 {
+	#sound-dai-cells = <1>;
+	compatible = "renesas,rcar_sound-gen2";
+	reg =	<0 0xec500000 0 0x1000>, /* SCU */
+		<0 0xec5a0000 0 0x100>,  /* ADG */
+		<0 0xec540000 0 0x1000>, /* SSIU */
+		<0 0xec541000 0 0x1280>; /* SSI */
+
+	rcar_sound,src {
+		src0: src@0 { };
+		src1: src@1 { };
+		src2: src@2 { };
+		src3: src@3 { };
+		src4: src@4 { };
+		src5: src@5 { };
+		src6: src@6 { };
+		src7: src@7 { };
+		src8: src@8 { };
+		src9: src@9 { };
+	};
+
+	rcar_sound,ssi {
+		ssi0: ssi@0 {
+			interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi1: ssi@1 {
+			interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi2: ssi@2 {
+			interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi3: ssi@3 {
+			interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi4: ssi@4 {
+			interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi5: ssi@5 {
+			interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi6: ssi@6 {
+			interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi7: ssi@7 {
+			interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi8: ssi@8 {
+			interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi9: ssi@9 {
+			interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi5 &src5>;
+			capture  = <&ssi6>;
+		};
+		dai1 {
+			playback = <&ssi3>;
+		};
+		dai2 {
+			capture  = <&ssi4>;
+		};
+		dai3 {
+			playback = <&ssi7>;
+		};
+		dai4 {
+			capture  = <&ssi8>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt
index b30c222f9cd3..881914b139ca 100644
--- a/Documentation/devicetree/bindings/sound/simple-card.txt
+++ b/Documentation/devicetree/bindings/sound/simple-card.txt
@@ -43,6 +43,12 @@ Optional CPU/CODEC subnodes properties:
 					  clock node (= common clock), or "system-clock-frequency"
 					  (if system doens't support common clock)
 
+Note:
+ * For 'format', 'frame-master', 'bitclock-master', 'bitclock-inversion' and
+   'frame-inversion', the simple card will use the settings of CODEC for both
+   CPU and CODEC sides as we need to keep the settings identical for both ends
+   of the link.
+
 Example:
 
 sound {