Merge tag 'usb-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.15

another substantial pull request with new features all over
the place.

dwc3 got a bit closer towards hibernation support with after
a few patches re-factoring code to be reused for hibernation.
Also in dwc3 two new workarounds for known silicon bugs have
been implemented, some randconfig build errors have been fixed,
and it was taught about the new generic phy layer.

MUSB on AM335x now supports isochronous transfers thanks to
George Cherian's work.

The atmel_usba driver got two crash fixes: one when no endpoint
was specified in DeviceTree data and another when stopping the UDC
in DEBUG builds.

Function FS got a much needed fix to ffs_epfile_io() which was
copying too much data to userspace in some cases.

The printer gadget got a fix for a possible deadlock and plugged
a memory leak.

Ethernet drivers now use NAPI for RX which gives improved throughput.

Other than that, the usual miscelaneous fixes, cleanups, and
the like.

Signed-of-by: Felipe Balbi <balbi@ti.com>

5 files changed, 97 insertions, 75 deletions

diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
new file mode 100644
index 000000000000..788fb0fa3762
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -0,0 +1,86 @@
+TI PHY: DT DOCUMENTATION FOR PHYs in TI PLATFORMs
+
+OMAP CONTROL PHY
+
+Required properties:
+ - compatible: Should be one of
+ "ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4.
+ "ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register
+                        e.g. USB2_PHY on OMAP5.
+ "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control
+                        e.g. USB3 PHY and SATA PHY on OMAP5.
+ "ti,control-phy-usb2-dra7" - if it has power down register like USB2 PHY on
+                        DRA7 platform.
+ "ti,control-phy-usb2-am437" - if it has power down register like USB2 PHY on
+                        AM437 platform.
+ - reg : Address and length of the register set for the device. It contains
+   the address of "otghs_control" for control-phy-otghs or "power" register
+   for other types.
+ - reg-names: should be "otghs_control" control-phy-otghs and "power" for
+   other types.
+
+omap_control_usb: omap-control-usb@4a002300 {
+        compatible = "ti,control-phy-otghs";
+        reg = <0x4a00233c 0x4>;
+        reg-names = "otghs_control";
+};
+
+OMAP USB2 PHY
+
+Required properties:
+ - compatible: Should be "ti,omap-usb2"
+ - reg : Address and length of the register set for the device.
+ - #phy-cells: determine the number of cells that should be given in the
+   phandle while referencing this phy.
+
+Optional properties:
+ - ctrl-module : phandle of the control module used by PHY driver to power on
+   the PHY.
+
+This is usually a subnode of ocp2scp to which it is connected.
+
+usb2phy@4a0ad080 {
+	compatible = "ti,omap-usb2";
+	reg = <0x4a0ad080 0x58>;
+	ctrl-module = <&omap_control_usb>;
+	#phy-cells = <0>;
+};
+
+TI PIPE3 PHY
+
+Required properties:
+ - compatible: Should be "ti,phy-usb3" or "ti,phy-pipe3-sata".
+   "ti,omap-usb3" is deprecated.
+ - reg : Address and length of the register set for the device.
+ - reg-names: The names of the register addresses corresponding to the registers
+   filled in "reg".
+ - #phy-cells: determine the number of cells that should be given in the
+   phandle while referencing this phy.
+ - clocks: a list of phandles and clock-specifier pairs, one for each entry in
+   clock-names.
+ - clock-names: should include:
+   * "wkupclk" - wakeup clock.
+   * "sysclk" - system clock.
+   * "refclk" - reference clock.
+
+Optional properties:
+ - ctrl-module : phandle of the control module used by PHY driver to power on
+   the PHY.
+
+This is usually a subnode of ocp2scp to which it is connected.
+
+usb3phy@4a084400 {
+	compatible = "ti,phy-usb3";
+	reg = <0x4a084400 0x80>,
+	      <0x4a084800 0x64>,
+	      <0x4a084c00 0x40>;
+	reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+	ctrl-module = <&omap_control_usb>;
+	#phy-cells = <0>;
+	clocks = <&usb_phy_cm_clk32k>,
+		 <&sys_clkin>,
+		 <&usb_otg_ss_refclk960m>;
+	clock-names =	"wkupclk",
+			"sysclk",
+			"refclk";
+};
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index e807635f9e1c..471366d6a129 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -6,11 +6,13 @@ Required properties:
  - compatible: must be "snps,dwc3"
  - reg : Address and length of the register set for the device
  - interrupts: Interrupts used by the dwc3 controller.
+
+Optional properties:
  - usb-phy : array of phandle for the PHY device.  The first element
    in the array is expected to be a handle to the USB2/HS PHY and
    the second element is expected to be a handle to the USB3/SS PHY
-
-Optional properties:
+ - phys: from the *Generic PHY* bindings
+ - phy-names: from the *Generic PHY* bindings
  - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
 
 This is usually a subnode to DWC3 glue to which it is connected.
diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
index 5835b27146ea..cef181a9d8bd 100644
--- a/Documentation/devicetree/bindings/usb/mxs-phy.txt
+++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
@@ -1,13 +1,19 @@
 * Freescale MXS USB Phy Device
 
 Required properties:
-- compatible: Should be "fsl,imx23-usbphy"
+- compatible: should contain:
+	* "fsl,imx23-usbphy" for imx23 and imx28
+	* "fsl,imx6q-usbphy" for imx6dq and imx6dl
+	* "fsl,imx6sl-usbphy" for imx6sl
+  "fsl,imx23-usbphy" is still a fallback for other strings
 - reg: Should contain registers location and length
 - interrupts: Should contain phy interrupt
+- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
 
 Example:
 usbphy1: usbphy@020c9000 {
 	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 	reg = <0x020c9000 0x1000>;
 	interrupts = <0 44 0x04>;
+	fsl,anatop = <&anatop>;
 };
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index c495135115cb..38b2faec4199 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -76,27 +76,3 @@ omap_dwc3 {
 	ranges;
 };
 
-OMAP CONTROL USB
-
-Required properties:
- - compatible: Should be one of
- "ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4.
- "ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register
-			e.g. USB2_PHY on OMAP5.
- "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control
-			e.g. USB3 PHY and SATA PHY on OMAP5.
- "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on
-			DRA7 platform.
- "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on
-			AM437 platform.
- - reg : Address and length of the register set for the device. It contains
-   the address of "otghs_control" for control-phy-otghs or "power" register
-   for other types.
- - reg-names: should be "otghs_control" control-phy-otghs and "power" for
-   other types.
-
-omap_control_usb: omap-control-usb@4a002300 {
-	compatible = "ti,control-phy-otghs";
-	reg = <0x4a00233c 0x4>;
-	reg-names = "otghs_control";
-};
diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt
deleted file mode 100644
index c0245c888982..000000000000
--- a/Documentation/devicetree/bindings/usb/usb-phy.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-USB PHY
-
-OMAP USB2 PHY
-
-Required properties:
- - compatible: Should be "ti,omap-usb2"
- - reg : Address and length of the register set for the device.
- - #phy-cells: determine the number of cells that should be given in the
-   phandle while referencing this phy.
-
-Optional properties:
- - ctrl-module : phandle of the control module used by PHY driver to power on
-   the PHY.
-
-This is usually a subnode of ocp2scp to which it is connected.
-
-usb2phy@4a0ad080 {
-	compatible = "ti,omap-usb2";
-	reg = <0x4a0ad080 0x58>;
-	ctrl-module = <&omap_control_usb>;
-	#phy-cells = <0>;
-};
-
-OMAP USB3 PHY
-
-Required properties:
- - compatible: Should be "ti,omap-usb3"
- - reg : Address and length of the register set for the device.
- - reg-names: The names of the register addresses corresponding to the registers
-   filled in "reg".
- - #phy-cells: determine the number of cells that should be given in the
-   phandle while referencing this phy.
-
-Optional properties:
- - ctrl-module : phandle of the control module used by PHY driver to power on
-   the PHY.
-
-This is usually a subnode of ocp2scp to which it is connected.
-
-usb3phy@4a084400 {
-	compatible = "ti,omap-usb3";
-	reg = <0x4a084400 0x80>,
-	      <0x4a084800 0x64>,
-	      <0x4a084c00 0x40>;
-	reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-	ctrl-module = <&omap_control_usb>;
-	#phy-cells = <0>;
-};