summaryrefslogtreecommitdiffstats
path: root/Documentation/usb/proc_usb_info.txt
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/usb/proc_usb_info.txt
downloadblackbird-op-linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
blackbird-op-linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'Documentation/usb/proc_usb_info.txt')
-rw-r--r--Documentation/usb/proc_usb_info.txt371
1 files changed, 371 insertions, 0 deletions
diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
new file mode 100644
index 000000000000..729c72d34c89
--- /dev/null
+++ b/Documentation/usb/proc_usb_info.txt
@@ -0,0 +1,371 @@
+/proc/bus/usb filesystem output
+===============================
+(version 2003.05.30)
+
+
+The usbfs filesystem for USB devices is traditionally mounted at
+/proc/bus/usb. It provides the /proc/bus/usb/devices file, as well as
+the /proc/bus/usb/BBB/DDD files.
+
+
+**NOTE**: If /proc/bus/usb appears empty, and a host controller
+ driver has been linked, then you need to mount the
+ filesystem. Issue the command (as root):
+
+ mount -t usbfs none /proc/bus/usb
+
+ An alternative and more permanent method would be to add
+
+ none /proc/bus/usb usbfs defaults 0 0
+
+ to /etc/fstab. This will mount usbfs at each reboot.
+ You can then issue `cat /proc/bus/usb/devices` to extract
+ USB device information, and user mode drivers can use usbfs
+ to interact with USB devices.
+
+ There are a number of mount options supported by usbfs.
+ Consult the source code (linux/drivers/usb/core/inode.c) for
+ information about those options.
+
+**NOTE**: The filesystem has been renamed from "usbdevfs" to
+ "usbfs", to reduce confusion with "devfs". You may
+ still see references to the older "usbdevfs" name.
+
+For more information on mounting the usbfs file system, see the
+"USB Device Filesystem" section of the USB Guide. The latest copy
+of the USB Guide can be found at http://www.linux-usb.org/
+
+
+THE /proc/bus/usb/BBB/DDD FILES:
+--------------------------------
+Each connected USB device has one file. The BBB indicates the bus
+number. The DDD indicates the device address on that bus. Both
+of these numbers are assigned sequentially, and can be reused, so
+you can't rely on them for stable access to devices. For example,
+it's relatively common for devices to re-enumerate while they are
+still connected (perhaps someone jostled their power supply, hub,
+or USB cable), so a device might be 002/027 when you first connect
+it and 002/048 sometime later.
+
+These files can be read as binary data. The binary data consists
+of first the device descriptor, then the descriptors for each
+configuration of the device. That information is also shown in
+text form by the /proc/bus/usb/devices file, described later.
+
+These files may also be used to write user-level drivers for the USB
+devices. You would open the /proc/bus/usb/BBB/DDD file read/write,
+read its descriptors to make sure it's the device you expect, and then
+bind to an interface (or perhaps several) using an ioctl call. You
+would issue more ioctls to the device to communicate to it using
+control, bulk, or other kinds of USB transfers. The IOCTLs are
+listed in the <linux/usbdevice_fs.h> file, and at this writing the
+source code (linux/drivers/usb/devio.c) is the primary reference
+for how to access devices through those files.
+
+Note that since by default these BBB/DDD files are writable only by
+root, only root can write such user mode drivers. You can selectively
+grant read/write permissions to other users by using "chmod". Also,
+usbfs mount options such as "devmode=0666" may be helpful.
+
+
+
+THE /proc/bus/usb/devices FILE:
+-------------------------------
+In /proc/bus/usb/devices, each device's output has multiple
+lines of ASCII output.
+I made it ASCII instead of binary on purpose, so that someone
+can obtain some useful data from it without the use of an
+auxiliary program. However, with an auxiliary program, the numbers
+in the first 4 columns of each "T:" line (topology info:
+Lev, Prnt, Port, Cnt) can be used to build a USB topology diagram.
+
+Each line is tagged with a one-character ID for that line:
+
+T = Topology (etc.)
+B = Bandwidth (applies only to USB host controllers, which are
+ virtualized as root hubs)
+D = Device descriptor info.
+P = Product ID info. (from Device descriptor, but they won't fit
+ together on one line)
+S = String descriptors.
+C = Configuration descriptor info. (* = active configuration)
+I = Interface descriptor info.
+E = Endpoint descriptor info.
+
+=======================================================================
+
+/proc/bus/usb/devices output format:
+
+Legend:
+ d = decimal number (may have leading spaces or 0's)
+ x = hexadecimal number (may have leading spaces or 0's)
+ s = string
+
+
+Topology info:
+
+T: Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=ddd MxCh=dd
+| | | | | | | | |__MaxChildren
+| | | | | | | |__Device Speed in Mbps
+| | | | | | |__DeviceNumber
+| | | | | |__Count of devices at this level
+| | | | |__Connector/Port on Parent for this device
+| | | |__Parent DeviceNumber
+| | |__Level in topology for this bus
+| |__Bus number
+|__Topology info tag
+
+ Speed may be:
+ 1.5 Mbit/s for low speed USB
+ 12 Mbit/s for full speed USB
+ 480 Mbit/s for high speed USB (added for USB 2.0)
+
+
+Bandwidth info:
+B: Alloc=ddd/ddd us (xx%), #Int=ddd, #Iso=ddd
+| | | |__Number of isochronous requests
+| | |__Number of interrupt requests
+| |__Total Bandwidth allocated to this bus
+|__Bandwidth info tag
+
+ Bandwidth allocation is an approximation of how much of one frame
+ (millisecond) is in use. It reflects only periodic transfers, which
+ are the only transfers that reserve bandwidth. Control and bulk
+ transfers use all other bandwidth, including reserved bandwidth that
+ is not used for transfers (such as for short packets).
+
+ The percentage is how much of the "reserved" bandwidth is scheduled by
+ those transfers. For a low or full speed bus (loosely, "USB 1.1"),
+ 90% of the bus bandwidth is reserved. For a high speed bus (loosely,
+ "USB 2.0") 80% is reserved.
+
+
+Device descriptor info & Product ID info:
+
+D: Ver=x.xx Cls=xx(s) Sub=xx Prot=xx MxPS=dd #Cfgs=dd
+P: Vendor=xxxx ProdID=xxxx Rev=xx.xx
+
+where
+D: Ver=x.xx Cls=xx(sssss) Sub=xx Prot=xx MxPS=dd #Cfgs=dd
+| | | | | | |__NumberConfigurations
+| | | | | |__MaxPacketSize of Default Endpoint
+| | | | |__DeviceProtocol
+| | | |__DeviceSubClass
+| | |__DeviceClass
+| |__Device USB version
+|__Device info tag #1
+
+where
+P: Vendor=xxxx ProdID=xxxx Rev=xx.xx
+| | | |__Product revision number
+| | |__Product ID code
+| |__Vendor ID code
+|__Device info tag #2
+
+
+String descriptor info:
+
+S: Manufacturer=ssss
+| |__Manufacturer of this device as read from the device.
+| For USB host controller drivers (virtual root hubs) this may
+| be omitted, or (for newer drivers) will identify the kernel
+| version and the driver which provides this hub emulation.
+|__String info tag
+
+S: Product=ssss
+| |__Product description of this device as read from the device.
+| For older USB host controller drivers (virtual root hubs) this
+| indicates the driver; for newer ones, it's a product (and vendor)
+| description that often comes from the kernel's PCI ID database.
+|__String info tag
+
+S: SerialNumber=ssss
+| |__Serial Number of this device as read from the device.
+| For USB host controller drivers (virtual root hubs) this is
+| some unique ID, normally a bus ID (address or slot name) that
+| can't be shared with any other device.
+|__String info tag
+
+
+
+Configuration descriptor info:
+
+C:* #Ifs=dd Cfg#=dd Atr=xx MPwr=dddmA
+| | | | | |__MaxPower in mA
+| | | | |__Attributes
+| | | |__ConfiguratioNumber
+| | |__NumberOfInterfaces
+| |__ "*" indicates the active configuration (others are " ")
+|__Config info tag
+
+ USB devices may have multiple configurations, each of which act
+ rather differently. For example, a bus-powered configuration
+ might be much less capable than one that is self-powered. Only
+ one device configuration can be active at a time; most devices
+ have only one configuration.
+
+ Each configuration consists of one or more interfaces. Each
+ interface serves a distinct "function", which is typically bound
+ to a different USB device driver. One common example is a USB
+ speaker with an audio interface for playback, and a HID interface
+ for use with software volume control.
+
+
+Interface descriptor info (can be multiple per Config):
+
+I: If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=ssss
+| | | | | | | |__Driver name
+| | | | | | | or "(none)"
+| | | | | | |__InterfaceProtocol
+| | | | | |__InterfaceSubClass
+| | | | |__InterfaceClass
+| | | |__NumberOfEndpoints
+| | |__AlternateSettingNumber
+| |__InterfaceNumber
+|__Interface info tag
+
+ A given interface may have one or more "alternate" settings.
+ For example, default settings may not use more than a small
+ amount of periodic bandwidth. To use significant fractions
+ of bus bandwidth, drivers must select a non-default altsetting.
+
+ Only one setting for an interface may be active at a time, and
+ only one driver may bind to an interface at a time. Most devices
+ have only one alternate setting per interface.
+
+
+Endpoint descriptor info (can be multiple per Interface):
+
+E: Ad=xx(s) Atr=xx(ssss) MxPS=dddd Ivl=dddss
+| | | | |__Interval (max) between transfers
+| | | |__EndpointMaxPacketSize
+| | |__Attributes(EndpointType)
+| |__EndpointAddress(I=In,O=Out)
+|__Endpoint info tag
+
+ The interval is nonzero for all periodic (interrupt or isochronous)
+ endpoints. For high speed endpoints the transfer interval may be
+ measured in microseconds rather than milliseconds.
+
+ For high speed periodic endpoints, the "MaxPacketSize" reflects
+ the per-microframe data transfer size. For "high bandwidth"
+ endpoints, that can reflect two or three packets (for up to
+ 3KBytes every 125 usec) per endpoint.
+
+ With the Linux-USB stack, periodic bandwidth reservations use the
+ transfer intervals and sizes provided by URBs, which can be less
+ than those found in endpoint descriptor.
+
+
+=======================================================================
+
+
+If a user or script is interested only in Topology info, for
+example, use something like "grep ^T: /proc/bus/usb/devices"
+for only the Topology lines. A command like
+"grep -i ^[tdp]: /proc/bus/usb/devices" can be used to list
+only the lines that begin with the characters in square brackets,
+where the valid characters are TDPCIE. With a slightly more able
+script, it can display any selected lines (for example, only T, D,
+and P lines) and change their output format. (The "procusb"
+Perl script is the beginning of this idea. It will list only
+selected lines [selected from TBDPSCIE] or "All" lines from
+/proc/bus/usb/devices.)
+
+The Topology lines can be used to generate a graphic/pictorial
+of the USB devices on a system's root hub. (See more below
+on how to do this.)
+
+The Interface lines can be used to determine what driver is
+being used for each device.
+
+The Configuration lines could be used to list maximum power
+(in milliamps) that a system's USB devices are using.
+For example, "grep ^C: /proc/bus/usb/devices".
+
+
+Here's an example, from a system which has a UHCI root hub,
+an external hub connected to the root hub, and a mouse and
+a serial converter connected to the external hub.
+
+T: Bus=00 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
+B: Alloc= 28/900 us ( 3%), #Int= 2, #Iso= 0
+D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
+P: Vendor=0000 ProdID=0000 Rev= 0.00
+S: Product=USB UHCI Root Hub
+S: SerialNumber=dce0
+C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
+I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
+E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
+T: Bus=00 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 4
+D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
+P: Vendor=0451 ProdID=1446 Rev= 1.00
+C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
+I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
+E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
+T: Bus=00 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
+D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
+P: Vendor=04b4 ProdID=0001 Rev= 0.00
+C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
+I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=mouse
+E: Ad=81(I) Atr=03(Int.) MxPS= 3 Ivl= 10ms
+T: Bus=00 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
+D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
+P: Vendor=0565 ProdID=0001 Rev= 1.08
+S: Manufacturer=Peracom Networks, Inc.
+S: Product=Peracom USB to Serial Converter
+C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
+I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=serial
+E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 16ms
+E: Ad=01(O) Atr=02(Bulk) MxPS= 16 Ivl= 16ms
+E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl= 8ms
+
+
+Selecting only the "T:" and "I:" lines from this (for example, by using
+"procusb ti"), we have:
+
+T: Bus=00 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
+T: Bus=00 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 4
+I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
+T: Bus=00 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
+I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=mouse
+T: Bus=00 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
+I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=serial
+
+
+Physically this looks like (or could be converted to):
+
+ +------------------+
+ | PC/root_hub (12)| Dev# = 1
+ +------------------+ (nn) is Mbps.
+ Level 0 | CN.0 | CN.1 | [CN = connector/port #]
+ +------------------+
+ /
+ /
+ +-----------------------+
+ Level 1 | Dev#2: 4-port hub (12)|
+ +-----------------------+
+ |CN.0 |CN.1 |CN.2 |CN.3 |
+ +-----------------------+
+ \ \____________________
+ \_____ \
+ \ \
+ +--------------------+ +--------------------+
+ Level 2 | Dev# 3: mouse (1.5)| | Dev# 4: serial (12)|
+ +--------------------+ +--------------------+
+
+
+
+Or, in a more tree-like structure (ports [Connectors] without
+connections could be omitted):
+
+PC: Dev# 1, root hub, 2 ports, 12 Mbps
+|_ CN.0: Dev# 2, hub, 4 ports, 12 Mbps
+ |_ CN.0: Dev #3, mouse, 1.5 Mbps
+ |_ CN.1:
+ |_ CN.2: Dev #4, serial, 12 Mbps
+ |_ CN.3:
+|_ CN.1:
+
+
+ ### END ###
OpenPOWER on IntegriCloud