summaryrefslogtreecommitdiffstats
path: root/Documentation/pwm.txt
diff options
context:
space:
mode:
authorH Hartley Sweeten <hartleys@visionengravers.com>2013-06-11 10:38:59 -0700
committerThierry Reding <thierry.reding@gmail.com>2013-06-21 11:32:51 +0200
commit76abbdde2d95a3807d0dc6bf9f84d03d0dbd4f3d (patch)
tree63a5476d6fbf80ec90b813461ec7ec67ff462684 /Documentation/pwm.txt
parent3dd0a909479c1d372341d749b4ff94cd638b57da (diff)
downloadblackbird-op-linux-76abbdde2d95a3807d0dc6bf9f84d03d0dbd4f3d.tar.gz
blackbird-op-linux-76abbdde2d95a3807d0dc6bf9f84d03d0dbd4f3d.zip
pwm: Add sysfs interface
Add a simple sysfs interface to the generic PWM framework. /sys/class/pwm/ `-- pwmchipN/ for each PWM chip |-- export (w/o) ask the kernel to export a PWM channel |-- npwm (r/o) number of PWM channels in this PWM chip |-- pwmX/ for each exported PWM channel | |-- duty_cycle (r/w) duty cycle (in nanoseconds) | |-- enable (r/w) enable/disable PWM | |-- period (r/w) period (in nanoseconds) | `-- polarity (r/w) polarity of PWM (normal/inversed) `-- unexport (w/o) return a PWM channel to the kernel Based on work by Lars Poeschel. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Diffstat (limited to 'Documentation/pwm.txt')
-rw-r--r--Documentation/pwm.txt37
1 files changed, 37 insertions, 0 deletions
diff --git a/Documentation/pwm.txt b/Documentation/pwm.txt
index 7d2b4c9b544b..1039b68fe9c6 100644
--- a/Documentation/pwm.txt
+++ b/Documentation/pwm.txt
@@ -45,6 +45,43 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns);
To start/stop toggling the PWM output use pwm_enable()/pwm_disable().
+Using PWMs with the sysfs interface
+-----------------------------------
+
+If CONFIG_SYSFS is enabled in your kernel configuration a simple sysfs
+interface is provided to use the PWMs from userspace. It is exposed at
+/sys/class/pwm/. Each probed PWM controller/chip will be exported as
+pwmchipN, where N is the base of the PWM chip. Inside the directory you
+will find:
+
+npwm - The number of PWM channels this chip supports (read-only).
+
+export - Exports a PWM channel for use with sysfs (write-only).
+
+unexport - Unexports a PWM channel from sysfs (write-only).
+
+The PWM channels are numbered using a per-chip index from 0 to npwm-1.
+
+When a PWM channel is exported a pwmX directory will be created in the
+pwmchipN directory it is associated with, where X is the number of the
+channel that was exported. The following properties will then be available:
+
+period - The total period of the PWM signal (read/write).
+ Value is in nanoseconds and is the sum of the active and inactive
+ time of the PWM.
+
+duty_cycle - The active time of the PWM signal (read/write).
+ Value is in nanoseconds and must be less than the period.
+
+polarity - Changes the polarity of the PWM signal (read/write).
+ Writes to this property only work if the PWM chip supports changing
+ the polarity. The polarity can only be changed if the PWM is not
+ enabled. Value is the string "normal" or "inversed".
+
+enable - Enable/disable the PWM signal (read/write).
+ 0 - disabled
+ 1 - enabled
+
Implementing a PWM driver
-------------------------
OpenPOWER on IntegriCloud