ARM: EXYNOS: Add support for Exynos secure firmware

Some Exynos-based boards contain secure firmware and must use firmware
operations to set up some hardware.

This patch adds firmware operations for Exynos secure firmware and a way
for board code and device tree to specify that they must be used.

Example of use:

In board code:

  ...MACHINE_START(...)
          /* ... */
          .init_early   = exynos_firmware_init,
          /* ... */
  MACHINE_END

In device tree:

  / {
          /* ... */

          firmware@0203F000 {
                  compatible = "samsung,secure-firmware";
                  reg = <0x0203F000 0x1000>;
          };

          /* ... */
  };

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

1 files changed, 10 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung-boards.txt
index 0bf68be56fd1..2168ed31e1b0 100644
--- a/Documentation/devicetree/bindings/arm/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt
@@ -6,3 +6,13 @@ Required root node properties:
     - compatible = should be one or more of the following.
         (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board.
         (b) "samsung,exynos4210"  - for boards based on Exynos4210 SoC.
+
+Optional:
+    - firmware node, specifying presence and type of secure firmware:
+        - compatible: only "samsung,secure-firmware" is currently supported
+        - reg: address of non-secure SYSRAM used for communication with firmware
+
+	firmware@0203F000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0203F000 0x1000>;
+	};