Merge remote-tracking branch 'net-next/master' into mac80211-next

Resolve the merge conflict between Felix's/my and Toke's patches
coming into the tree through net and mac80211-next respectively.
Most of Felix's changes go away due to Toke's new infrastructure
work, my patch changes to "goto begin" (the label wasn't there
before) instead of returning NULL so flow control towards drivers
is preserved better.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

6 files changed, 70 insertions, 5 deletions

diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
index 1112e0d794e1..820fee4b77b6 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
@@ -13,6 +13,7 @@ Required properties:
 - touchscreen-size-y	  : See touchscreen.txt
 
 Optional properties:
+- firmware-name		  : File basename (string) for board specific firmware
 - touchscreen-inverted-x  : See touchscreen.txt
 - touchscreen-inverted-y  : See touchscreen.txt
 - touchscreen-swapped-x-y : See touchscreen.txt
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
index 88faa91125bf..3cd4c43a3260 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
@@ -10,7 +10,7 @@ Required properties:
 			subsystem (mmcss) inside the FlashSS (available in STiH407 SoC
 			family).
 
-- clock-names:		Should be "mmc".
+- clock-names:		Should be "mmc" and "icn".  (NB: The latter is not compulsory)
 			See: Documentation/devicetree/bindings/resource-names.txt
 - clocks:		Phandle to the clock.
 			See: Documentation/devicetree/bindings/clock/clock-bindings.txt
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt
index 5d88f37480b6..e1d76812419c 100644
--- a/Documentation/devicetree/bindings/net/ethernet.txt
+++ b/Documentation/devicetree/bindings/net/ethernet.txt
@@ -11,8 +11,8 @@ The following properties are common to the Ethernet controllers:
   the maximum frame size (there's contradiction in ePAPR).
 - phy-mode: string, operation mode of the PHY interface; supported values are
   "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id",
-  "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii"; this is now a de-facto
-  standard property;
+  "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii", "trgmii"; this is now a
+  de-facto standard property;
 - phy-connection-type: the same as "phy-mode" property but described in ePAPR;
 - phy-handle: phandle, specifies a reference to a node representing a PHY
   device; this property is described in ePAPR and so preferred;
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
index 32eaaca04d9b..f09525772369 100644
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt
@@ -24,14 +24,17 @@ Required properties:
 Optional properties:
 - interrupt-parent: Should be the phandle for the interrupt controller
   that services interrupts for this device
-
+- mediatek,hwlro: the capability if the hardware supports LRO functions
 
 * Ethernet MAC node
 
 Required properties:
 - compatible: Should be "mediatek,eth-mac"
 - reg: The number of the MAC
-- phy-handle: see ethernet.txt file in the same directory.
+- phy-handle: see ethernet.txt file in the same directory and
+	the phy-mode "trgmii" required being provided when reg
+	is equal to 0 and the MAC uses fixed-link to connect
+	with internal switch such as MT7530.
 
 Example:
 
@@ -51,6 +54,7 @@ eth: ethernet@1b100000 {
 	reset-names = "eth";
 	mediatek,ethsys = <&ethsys>;
 	mediatek,pctl = <&syscfg_pctl_a>;
+	mediatek,hwlro;
 	#address-cells = <1>;
 	#size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
new file mode 100644
index 000000000000..99c7eb0a00c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
@@ -0,0 +1,58 @@
+* Microsemi - vsc8531 Giga bit ethernet phy
+
+Required properties:
+- compatible	: Should contain phy id as "ethernet-phy-idAAAA.BBBB"
+		  The PHY device uses the binding described in
+		  Documentation/devicetree/bindings/net/phy.txt
+
+Optional properties:
+- vsc8531,vddmac	: The vddmac in mV.
+- vsc8531,edge-slowdown	: % the edge should be slowed down relative to
+			  the fastest possible edge time. Native sign
+			  need not enter.
+			  Edge rate sets the drive strength of the MAC
+			  interface output signals.  Changing the drive
+			  strength will affect the edge rate of the output
+			  signal.  The goal of this setting is to help
+			  reduce electrical emission (EMI) by being able
+			  to reprogram drive strength and in effect slow
+			  down the edge rate if desired.  Table 1 shows the
+			  impact to the edge rate per VDDMAC supply for each
+			  drive strength setting.
+			  Ref: Table:1 - Edge rate change below.
+
+Note: see dt-bindings/net/mscc-phy-vsc8531.h for applicable values
+
+Table: 1 - Edge rate change
+----------------------------------------------------------------|
+| 		Edge Rate Change (VDDMAC)			|
+|								|
+| 3300 mV	2500 mV		1800 mV		1500 mV		|
+|---------------------------------------------------------------|
+| Default	Deafult		Default		Default		|
+| (Fastest)			(recommended)	(recommended)	|
+|---------------------------------------------------------------|
+| -2%		-3%		-5%		-6%		|
+|---------------------------------------------------------------|
+| -4%		-6%		-9%		-14%		|
+|---------------------------------------------------------------|
+| -7%		-10%		-16%		-21%		|
+|(recommended)	(recommended)					|
+|---------------------------------------------------------------|
+| -10%		-14%		-23%		-29%		|
+|---------------------------------------------------------------|
+| -17%		-23%		-35%		-42%		|
+|---------------------------------------------------------------|
+| -29%		-37%		-52%		-58%		|
+|---------------------------------------------------------------|
+| -53%		-63%		-76%		-77%		|
+| (slowest)							|
+|---------------------------------------------------------------|
+
+Example:
+
+        vsc8531_0: ethernet-phy@0 {
+                compatible = "ethernet-phy-id0007.0570";
+                vsc8531,vddmac		= <3300>;
+                vsc8531,edge-slowdown	= <21>;
+        };
diff --git a/Documentation/devicetree/bindings/net/sh_eth.txt b/Documentation/devicetree/bindings/net/sh_eth.txt
index 2f6ec85fda8e..0115c85a2425 100644
--- a/Documentation/devicetree/bindings/net/sh_eth.txt
+++ b/Documentation/devicetree/bindings/net/sh_eth.txt
@@ -5,6 +5,8 @@ interface contains.
 
 Required properties:
 - compatible: "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC.
+	      "renesas,ether-r8a7743"  if the device is a part of R8A7743 SoC.
+	      "renesas,ether-r8a7745"  if the device is a part of R8A7745 SoC.
 	      "renesas,ether-r8a7778"  if the device is a part of R8A7778 SoC.
 	      "renesas,ether-r8a7779"  if the device is a part of R8A7779 SoC.
 	      "renesas,ether-r8a7790"  if the device is a part of R8A7790 SoC.