Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 4.5.  I don't think I've missed
  anything too major, I'm mostly back at work now but I'll probably get
  some sleep in 5 years time.

  Summary:

  New drivers:
   - etnaviv:

     GPU driver for the 3D core on the Vivante core used in numerous
     ARM boards.

  Highlights:

  Core:
   - Atomic suspend/resume helpers
   - Move the headers to using userspace friendlier types.
   - Documentation updates
   - Lots of struct_mutex removal.
   - Bunch of DP MST fixes from AMD.

  Panel:
   - More DSI helpers
   - Support for some new basic panels

  i915:
   - Basic Kabylake support
   - DP link training and detect code refactoring
   - fbc/psr fixes
   - FIFO underrun fixes
   - SDE interrupt handling fixes
   - dma-buf/fence support in pageflip path.
   - GPU side for MST audio support

  radeon/amdgpu:
   - Drop UMS support
   - GPUVM/Scheduler optimisations
   - Initial Powerplay support for Tonga/Fiji/CZ/ST
   - ACP audio prerequisites

  nouveau:
   - GK20a instmem improvements
   - PCIE link speed change support

  msm:
   - DSI support for msm8960/apq8064

  tegra:
   - Host1X support for Tegra210 SoC

  vc4:
   - 3D acceleration support

  armada:
   - Get rid of struct mutex

  tda998x:
   - Atomic modesetting support
   - TMDS clock limitations

  omapdrm:
   - Atomic modesetting support
   - improved TILER performance

  rockchip:
   - RK3036 VOP support
   - Atomic modesetting support
   - Synopsys DW MIPI DSI support

  exynos:
   - Runtime PM support
   - of_graph binding for DP panels
   - Cleanup of IPP code
   - Configurable plane support
   - Kernel panic fixes at release time"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (711 commits)
  drm/fb_cma_helper: Remove implicit call to disable_unused_functions
  drm/amdgpu: add missing irq.h include
  drm/vmwgfx: Fix a width / pitch mismatch on framebuffer updates
  drm/vmwgfx: Fix an incorrect lock check
  drm: nouveau: fix nouveau_debugfs_init prototype
  drm/nouveau/pci: fix check in nvkm_pcie_set_link
  drm/amdgpu: validate duplicates first
  drm/amdgpu: move VM page tables to the LRU end on CS v2
  drm/ttm: add ttm_bo_move_to_lru_tail function v2
  drm/ttm: fix adding foreign BOs to the swap LRU
  drm/ttm: fix adding foreign BOs to the LRU during init v2
  drm/radeon: use kobj_to_dev()
  drm/amdgpu: use kobj_to_dev()
  drm/amdgpu/cz: force vce clocks when sclks are forced
  drm/amdgpu/cz: force uvd clocks when sclks are forced
  drm/amdgpu/cz: add code to enable forcing VCE clocks
  drm/amdgpu/cz: add code to enable forcing UVD clocks
  drm/amdgpu: fix lost sync_to if scheduler is enabled.
  drm/amd/powerplay: fix static checker warning for return meaningless value.
  drm/sysfs: use kobj_to_dev()
  ...

12 files changed, 248 insertions, 16 deletions

diff --git a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
new file mode 100644
index 000000000000..ed5e0a7894ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
@@ -0,0 +1,54 @@
+Etnaviv DRM master device
+=========================
+
+The Etnaviv DRM master device is a virtual device needed to list all
+Vivante GPU cores that comprise the GPU subsystem.
+
+Required properties:
+- compatible: Should be one of
+    "fsl,imx-gpu-subsystem"
+    "marvell,dove-gpu-subsystem"
+- cores: Should contain a list of phandles pointing to Vivante GPU devices
+
+example:
+
+gpu-subsystem {
+	compatible = "fsl,imx-gpu-subsystem";
+	cores = <&gpu_2d>, <&gpu_3d>;
+};
+
+
+Vivante GPU core devices
+========================
+
+Required properties:
+- compatible: Should be "vivante,gc"
+  A more specific compatible is not needed, as the cores contain chip
+  identification registers at fixed locations, which provide all the
+  necessary information to the driver.
+- reg: should be register base and length as documented in the
+  datasheet
+- interrupts: Should contain the cores interrupt line
+- clocks: should contain one clock for entry in clock-names
+  see Documentation/devicetree/bindings/clock/clock-bindings.txt
+- clock-names:
+   - "bus":    AXI/register clock
+   - "core":   GPU core clock
+   - "shader": Shader clock (only required if GPU has feature PIPE_3D)
+
+Optional properties:
+- power-domains: a power domain consumer specifier according to
+  Documentation/devicetree/bindings/power/power_domain.txt
+
+example:
+
+gpu_3d: gpu@00130000 {
+	compatible = "vivante,gc";
+	reg = <0x00130000 0x4000>;
+	interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
+	         <&clks IMX6QDL_CLK_GPU3D_CORE>,
+	         <&clks IMX6QDL_CLK_GPU3D_SHADER>;
+	clock-names = "bus", "core", "shader";
+	power-domains = <&gpc 1>;
+};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 64693f2ebc51..fe4a7a2dea9c 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -1,3 +1,20 @@
+Device-Tree bindings for Samsung Exynos Embedded DisplayPort Transmitter(eDP)
+
+DisplayPort is industry standard to accommodate the growing board adoption
+of digital display technology within the PC and CE industries.
+It consolidates the internal and external connection methods to reduce device
+complexity and cost. It also supports necessary features for important cross
+industry applications and provides performance scalability to enable the next
+generation of displays that feature higher color depths, refresh rates, and
+display resolutions.
+
+eDP (embedded display port) device is compliant with Embedded DisplayPort
+standard as follows,
+- DisplayPort standard 1.1a for Exynos5250 and Exynos5260.
+- DisplayPort standard 1.3 for Exynos5422s and Exynos5800.
+
+eDP resides between FIMD and panel or FIMD and bridge such as LVDS.
+
 The Exynos display port interface should be configured based on
 the type of panel connected to it.
 
@@ -66,8 +83,15 @@ Optional properties for dp-controller:
 		Hotplug detect GPIO.
 			Indicates which GPIO should be used for hotplug
 			detection
-	-video interfaces: Device node can contain video interface port
-			    nodes according to [1].
+Video interfaces:
+  Device node can contain video interface port nodes according to [1].
+  The following are properties specific to those nodes:
+
+  endpoint node connected to bridge or panel node:
+   - remote-endpoint: specifies the endpoint in panel or bridge node.
+		      This node is required in all kinds of exynos dp
+		      to represent the connection between dp and bridge
+		      or dp and panel.
 
 [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
@@ -111,9 +135,18 @@ Board Specific portion:
 		};
 
 		ports {
-			port@0 {
+			port {
 				dp_out: endpoint {
-					remote-endpoint = <&bridge_in>;
+					remote-endpoint = <&dp_in>;
+				};
+			};
+		};
+
+		panel {
+			...
+			port {
+				dp_in: endpoint {
+					remote-endpoint = <&dp_out>;
 				};
 			};
 		};
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index f344b9e49198..e7423bea1424 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -14,17 +14,20 @@ Required properties:
 - clocks: device clocks
   See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
 - clock-names: the following clocks are required:
+  * "mdp_core_clk"
+  * "iface_clk"
   * "bus_clk"
-  * "byte_clk"
-  * "core_clk"
   * "core_mmss_clk"
-  * "iface_clk"
-  * "mdp_core_clk"
+  * "byte_clk"
   * "pixel_clk"
+  * "core_clk"
+  For DSIv2, we need an additional clock:
+   * "src_clk"
 - vdd-supply: phandle to vdd regulator device node
 - vddio-supply: phandle to vdd-io regulator device node
 - vdda-supply: phandle to vdda regulator device node
 - qcom,dsi-phy: phandle to DSI PHY device node
+- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
 
 Optional properties:
 - panel@0: Node of panel connected to this DSI controller.
@@ -51,6 +54,7 @@ Required properties:
   * "qcom,dsi-phy-28nm-hpm"
   * "qcom,dsi-phy-28nm-lp"
   * "qcom,dsi-phy-20nm"
+  * "qcom,dsi-phy-28nm-8960"
 - reg: Physical base address and length of the registers of PLL, PHY and PHY
   regulator
 - reg-names: The names of register regions. The following regions are required:
diff --git a/Documentation/devicetree/bindings/display/msm/mdp.txt b/Documentation/devicetree/bindings/display/msm/mdp.txt
index 0833edaba4c3..a214f6cd0363 100644
--- a/Documentation/devicetree/bindings/display/msm/mdp.txt
+++ b/Documentation/devicetree/bindings/display/msm/mdp.txt
@@ -2,18 +2,28 @@ Qualcomm adreno/snapdragon display controller
 
 Required properties:
 - compatible:
-  * "qcom,mdp" - mdp4
+  * "qcom,mdp4" - mdp4
+  * "qcom,mdp5" - mdp5
 - reg: Physical base address and length of the controller's registers.
 - interrupts: The interrupt signal from the display controller.
 - connectors: array of phandles for output device(s)
 - clocks: device clocks
   See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required:
-  * "core_clk"
-  * "iface_clk"
-  * "src_clk"
-  * "hdmi_clk"
-  * "mpd_clk"
+- clock-names: the following clocks are required.
+  For MDP4:
+   * "core_clk"
+   * "iface_clk"
+   * "lut_clk"
+   * "src_clk"
+   * "hdmi_clk"
+   * "mdp_clk"
+  For MDP5:
+   * "bus_clk"
+   * "iface_clk"
+   * "core_clk_src"
+   * "core_clk"
+   * "lut_clk" (some MDP5 versions may not need this)
+   * "vsync_clk"
 
 Optional properties:
 - gpus: phandle for gpu device
@@ -26,7 +36,7 @@ Example:
 	...
 
 	mdp: qcom,mdp@5100000 {
-		compatible = "qcom,mdp";
+		compatible = "qcom,mdp4";
 		reg = <0x05100000 0xf0000>;
 		interrupts = <GIC_SPI 75 0>;
 		connectors = <&hdmi>;
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt b/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt
new file mode 100644
index 000000000000..50be5e2438b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt
@@ -0,0 +1,7 @@
+Boe Corporation 8.0" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "boe,tv080wum-nl0"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt b/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt
new file mode 100644
index 000000000000..649744620ae1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt
@@ -0,0 +1,7 @@
+Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,g121x1-l03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt b/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt
new file mode 100644
index 000000000000..a8e940fe731e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt
@@ -0,0 +1,7 @@
+Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel
+
+Required properties:
+- compatible: should be "kyo,tcg121xglp"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt b/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt
new file mode 100644
index 000000000000..37dedf6a6702
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt
@@ -0,0 +1,20 @@
+Panasonic 10" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "panasonic,vvx10f034n00"
+- reg: DSI virtual channel of the peripheral
+- power-supply: phandle of the regulator that provides the supply voltage
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+	mdss_dsi@fd922800 {
+		panel@0 {
+			compatible = "panasonic,vvx10f034n00";
+			reg = <0>;
+			power-supply = <&vreg_vsp>;
+			backlight = <&lp8566_wled>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/panel/qiaodian,qd43003c0-40.txt b/Documentation/devicetree/bindings/display/panel/qiaodian,qd43003c0-40.txt
new file mode 100644
index 000000000000..0fbdab89ac3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/qiaodian,qd43003c0-40.txt
@@ -0,0 +1,7 @@
+QiaoDian XianShi Corporation 4"3 TFT LCD panel
+
+Required properties:
+- compatible: should be "qiaodian,qd43003c0-40"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt
new file mode 100644
index 000000000000..3770a111968b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt
@@ -0,0 +1,22 @@
+Sharp Microelectronics 4.3" qHD TFT LCD panel
+
+Required properties:
+- compatible: should be "sharp,ls043t1le01-qhd"
+- reg: DSI virtual channel of the peripheral
+- power-supply: phandle of the regulator that provides the supply voltage
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+- reset-gpios: a GPIO spec for the reset pin
+
+Example:
+
+	mdss_dsi@fd922800 {
+		panel@0 {
+			compatible = "sharp,ls043t1le01-qhd";
+			reg = <0>;
+			avdd-supply = <&pm8941_l22>;
+			backlight = <&pm8941_wled>;
+			reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
new file mode 100644
index 000000000000..1753f0cc6fad
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
@@ -0,0 +1,60 @@
+Rockchip specific extensions to the Synopsys Designware MIPI DSI
+================================
+
+Required properties:
+- #address-cells: Should be <1>.
+- #size-cells: Should be <0>.
+- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
+- reg: Represent the physical address range of the controller.
+- interrupts: Represent the controller's interrupt to the CPU(s).
+- clocks, clock-names: Phandles to the controller's pll reference
+  clock(ref) and APB clock(pclk), as described in [1].
+- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
+- ports: contain a port node with endpoint definitions as defined in [2].
+  For vopb,set the reg = <0> and set the reg = <1> for vopl.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+	mipi_dsi: mipi@ff960000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0xff960000 0x4000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+		clock-names = "ref", "pclk";
+		rockchip,grf = <&grf>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			mipi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mipi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+				mipi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+		};
+
+		panel {
+			compatible ="boe,tv080wum-nl0";
+			reg = <0>;
+
+			enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&lcd_en>;
+			backlight = <&backlight>;
+			status = "okay";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
index d15351f2313d..5489b59e3d41 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
@@ -7,6 +7,7 @@ buffer to an external LCD interface.
 Required properties:
 - compatible: value should be one of the following
 		"rockchip,rk3288-vop";
+		"rockchip,rk3036-vop";
 
 - interrupts: should contain a list of all VOP IP block interrupts in the
 		 order: VSYNC, LCD_SYSTEM. The interrupt specifier