summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorGeert Uytterhoeven <geert+renesas@glider.be>2019-10-24 17:23:23 +0200
committerDavid S. Miller <davem@davemloft.net>2019-10-28 13:41:59 -0700
commite1b185491f739983b596804953586346e50351c9 (patch)
treefa3b4286b2906c0a416821d222071c5d73b08cb6
parentc199ce4f9dd896c716aece33e6750be34aea1151 (diff)
downloadblackbird-op-linux-e1b185491f739983b596804953586346e50351c9.tar.gz
blackbird-op-linux-e1b185491f739983b596804953586346e50351c9.zip
net: Fix various misspellings of "connect"
Fix misspellings of "disconnect", "disconnecting", "connections", and "disconnected". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/wimax/i2400m/usb.c2
-rw-r--r--drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c4
-rw-r--r--include/net/cfg80211.h2
-rw-r--r--net/netfilter/ipvs/ip_vs_ovf.c2
-rw-r--r--net/wireless/reg.h2
5 files changed, 6 insertions, 6 deletions
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 6953f904232f..9659f9e1aaa6 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -511,7 +511,7 @@ error_alloc_netdev:
/*
- * Disconect a i2400m from the system.
+ * Disconnect a i2400m from the system.
*
* i2400m_stop() has been called before, so al the rx and tx contexts
* have been taken down already. Make sure the queue is stopped,
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
index 6d6e8994460d..81313e0ca834 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c
@@ -1352,9 +1352,9 @@ static void _rtl92s_phy_set_rfhalt(struct ieee80211_hw *hw)
/* SW/HW radio off or halt adapter!! For example S3/S4 */
} else {
/* LED function disable. Power range is about 8mA now. */
- /* if write 0xF1 disconnet_pci power
+ /* if write 0xF1 disconnect_pci power
* ifconfig wlan0 down power are both high 35:70 */
- /* if write oxF9 disconnet_pci power
+ /* if write oxF9 disconnect_pci power
* ifconfig wlan0 down power are both low 12:45*/
rtl_write_byte(rtlpriv, 0x03, 0xF9);
}
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 4ab2c49423dc..ab6850bbba99 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -6593,7 +6593,7 @@ struct cfg80211_roam_info {
* time it is accessed in __cfg80211_roamed() due to delay in scheduling
* rdev->event_work. In case of any failures, the reference is released
* either in cfg80211_roamed() or in __cfg80211_romed(), Otherwise, it will be
- * released while diconneting from the current bss.
+ * released while disconnecting from the current bss.
*/
void cfg80211_roamed(struct net_device *dev, struct cfg80211_roam_info *info,
gfp_t gfp);
diff --git a/net/netfilter/ipvs/ip_vs_ovf.c b/net/netfilter/ipvs/ip_vs_ovf.c
index 78b074cd5464..c03066fdd5ca 100644
--- a/net/netfilter/ipvs/ip_vs_ovf.c
+++ b/net/netfilter/ipvs/ip_vs_ovf.c
@@ -5,7 +5,7 @@
* Authors: Raducu Deaconu <rhadoo_io@yahoo.com>
*
* Scheduler implements "overflow" loadbalancing according to number of active
- * connections , will keep all conections to the node with the highest weight
+ * connections , will keep all connections to the node with the highest weight
* and overflow to the next node if the number of connections exceeds the node's
* weight.
* Note that this scheduler might not be suitable for UDP because it only uses
diff --git a/net/wireless/reg.h b/net/wireless/reg.h
index dc8f689bd469..f9e83031a40a 100644
--- a/net/wireless/reg.h
+++ b/net/wireless/reg.h
@@ -114,7 +114,7 @@ void regulatory_hint_country_ie(struct wiphy *wiphy,
u8 country_ie_len);
/**
- * regulatory_hint_disconnect - informs all devices have been disconneted
+ * regulatory_hint_disconnect - informs all devices have been disconnected
*
* Regulotory rules can be enhanced further upon scanning and upon
* connection to an AP. These rules become stale if we disconnect
OpenPOWER on IntegriCloud