Merge remote-tracking branch 'pinctrl/samsung' into next/pinctrl-samsung

7 files changed, 741 insertions, 665 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index 03dee50532f5..63806e2d49c2 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -13,8 +13,14 @@ Required Properties:
 - reg: Base address of the pin controller hardware module and length of
   the address space it occupies.
 
-- interrupts: interrupt specifier for the controller. The format and value of
-  the interrupt specifier depends on the interrupt parent for the controller.
+- Pin banks as child nodes: Pin banks of the controller are represented by child
+  nodes of the controller node. Bank name is taken from name of the node. Each
+  bank node must contain following properties:
+
+  - gpio-controller: identifies the node as a gpio controller and pin bank.
+  - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
+    binding is used, the amount of cells must be specified as 2. See generic
+    GPIO binding documentation for description of particular cells.
 
 - Pin mux/config groups as child nodes: The pin mux (selecting pin function
   mode) and pin config (pull up/down, driver strength) settings are represented
@@ -72,16 +78,24 @@ used as system wakeup events.
 A. External GPIO Interrupts: For supporting external gpio interrupts, the
    following properties should be specified in the pin-controller device node.
 
-- interrupt-controller: identifies the controller node as interrupt-parent.
-- #interrupt-cells: the value of this property should be 2.
-  - First Cell: represents the external gpio interrupt number local to the
-    external gpio interrupt space of the controller.
-  - Second Cell: flags to identify the type of the interrupt
-    - 1 = rising edge triggered
-    - 2 = falling edge triggered
-    - 3 = rising and falling edge triggered
-    - 4 = high level triggered
-    - 8 = low level triggered
+   - interrupt-parent: phandle of the interrupt parent to which the external
+     GPIO interrupts are forwarded to.
+   - interrupts: interrupt specifier for the controller. The format and value of
+     the interrupt specifier depends on the interrupt parent for the controller.
+
+   In addition, following properties must be present in node of every bank
+   of pins supporting GPIO interrupts:
+
+   - interrupt-controller: identifies the controller node as interrupt-parent.
+   - #interrupt-cells: the value of this property should be 2.
+     - First Cell: represents the external gpio interrupt number local to the
+       external gpio interrupt space of the controller.
+     - Second Cell: flags to identify the type of the interrupt
+       - 1 = rising edge triggered
+       - 2 = falling edge triggered
+       - 3 = rising and falling edge triggered
+       - 4 = high level triggered
+       - 8 = low level triggered
 
 B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
    child node representing the external wakeup interrupt controller should be
@@ -94,6 +108,11 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
        found on Samsung Exynos4210 SoC.
    - interrupt-parent: phandle of the interrupt parent to which the external
      wakeup interrupts are forwarded to.
+   - interrupts: interrupt used by multiplexed wakeup interrupts.
+
+   In addition, following properties must be present in node of every bank
+   of pins supporting wake-up interrupts:
+
    - interrupt-controller: identifies the node as interrupt-parent.
    - #interrupt-cells: the value of this property should be 2
      - First Cell: represents the external wakeup interrupt number local to
@@ -105,11 +124,63 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
        - 4 = high level triggered
        - 8 = low level triggered
 
+   Node of every bank of pins supporting direct wake-up interrupts (without
+   multiplexing) must contain following properties:
+
+   - interrupt-parent: phandle of the interrupt parent to which the external
+     wakeup interrupts are forwarded to.
+   - interrupts: interrupts of the interrupt parent which are used for external
+     wakeup interrupts from pins of the bank, must contain interrupts for all
+     pins of the bank.
+
 Aliases:
 
 All the pin controller nodes should be represented in the aliases node using
 the following format 'pinctrl{n}' where n is a unique number for the alias.
 
+Example: A pin-controller node with pin banks:
+
+	pinctrl_0: pinctrl@11400000 {
+		compatible = "samsung,pinctrl-exynos4210";
+		reg = <0x11400000 0x1000>;
+		interrupts = <0 47 0>;
+
+		/* ... */
+
+		/* Pin bank without external interrupts */
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		/* ... */
+
+		/* Pin bank with external GPIO or muxed wake-up interrupts */
+		gpj0: gpj0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		/* ... */
+
+		/* Pin bank with external direct wake-up interrupts */
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+			#interrupt-cells = <2>;
+		};
+
+		/* ... */
+	};
+
 Example 1: A pin-controller node with pin groups.
 
 	pinctrl_0: pinctrl@11400000 {
@@ -117,6 +188,8 @@ Example 1: A pin-controller node with pin groups.
 		reg = <0x11400000 0x1000>;
 		interrupts = <0 47 0>;
 
+		/* ... */
+
 		uart0_data: uart0-data {
 			samsung,pins = "gpa0-0", "gpa0-1";
 			samsung,pin-function = <2>;
@@ -158,20 +231,14 @@ Example 2: A pin-controller node with external wakeup interrupt controller node.
 	pinctrl_1: pinctrl@11000000 {
 		compatible = "samsung,pinctrl-exynos4210";
 		reg = <0x11000000 0x1000>;
-		interrupts = <0 46 0>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
+		interrupts = <0 46 0>
 
-		wakup_eint: wakeup-interrupt-controller {
+		/* ... */
+
+		wakeup-interrupt-controller {
 			compatible = "samsung,exynos4210-wakeup-eint";
 			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
-					<0 32 0>;
+			interrupts = <0 32 0>;
 		};
 	};
 
@@ -190,7 +257,8 @@ Example 4: Set up the default pin state for uart controller.
 
 	static int s3c24xx_serial_probe(struct platform_device *pdev) {
 		struct pinctrl *pinctrl;
-		...
-		...
+
+		/* ... */
+
 		pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
 	}
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index b12cf272ad0d..6a4a1a04221c 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -16,6 +16,134 @@
 
 / {
 	pinctrl@11400000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb: gpb {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd0: gpd0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe0: gpe0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe1: gpe1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe2: gpe2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe3: gpe3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe4: gpe4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf2: gpf2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf3: gpf3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
 		uart0_data: uart0-data {
 			samsung,pins = "gpa0-0", "gpa0-1";
 			samsung,pin-function = <0x2>;
@@ -205,6 +333,151 @@
 	};
 
 	pinctrl@11000000 {
+		gpj0: gpj0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj1: gpj1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk0: gpk0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk1: gpk1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk2: gpk2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk3: gpk3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl0: gpl0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl1: gpl1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl2: gpl2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy1: gpy1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy2: gpy2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy3: gpy3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy4: gpy4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy5: gpy5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy6: gpy6 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
 		sd0_clk: sd0-clk {
 			samsung,pins = "gpk0-0";
 			samsung,pin-function = <2>;
@@ -438,6 +711,11 @@
 	};
 
 	pinctrl@03860000 {
+		gpz: gpz {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
 		i2s0_bus: i2s0-bus {
 			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 					"gpz-4", "gpz-5", "gpz-6";
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 214c557eda7f..d877dbe7ac0e 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -46,27 +46,17 @@
 		compatible = "samsung,pinctrl-exynos4210";
 		reg = <0x11400000 0x1000>;
 		interrupts = <0 47 0>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
 	};
 
 	pinctrl_1: pinctrl@11000000 {
 		compatible = "samsung,pinctrl-exynos4210";
 		reg = <0x11000000 0x1000>;
 		interrupts = <0 46 0>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
 
 		wakup_eint: wakeup-interrupt-controller {
 			compatible = "samsung,exynos4210-wakeup-eint";
 			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-				     <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
-				     <0 32 0>;
+			interrupts = <0 32 0>;
 		};
 	};
 
@@ -74,233 +64,4 @@
 		compatible = "samsung,pinctrl-exynos4210";
 		reg = <0x03860000 0x1000>;
 	};
-
-	gpio-controllers {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		gpio-controller;
-		ranges;
-
-		gpa0: gpio-controller@11400000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400000 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpa1: gpio-controller@11400020 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400020 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpb: gpio-controller@11400040 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400040 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpc0: gpio-controller@11400060 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400060 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpc1: gpio-controller@11400080 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400080 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpd0: gpio-controller@114000A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpd1: gpio-controller@114000C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe0: gpio-controller@114000E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe1: gpio-controller@11400100 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400100 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe2: gpio-controller@11400120 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400120 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe3: gpio-controller@11400140 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400140 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe4: gpio-controller@11400160 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400160 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf0: gpio-controller@11400180 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400180 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf1: gpio-controller@114001A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf2: gpio-controller@114001C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf3: gpio-controller@114001E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpj0: gpio-controller@11000000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000000 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpj1: gpio-controller@11000020 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000020 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpk0: gpio-controller@11000040 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000040 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpk1: gpio-controller@11000060 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000060 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpk2: gpio-controller@11000080 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000080 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpk3: gpio-controller@110000A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110000A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpl0: gpio-controller@110000C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110000C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpl1: gpio-controller@110000E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110000E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpl2: gpio-controller@11000100 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000100 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy0: gpio-controller@11000120 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000120 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy1: gpio-controller@11000140 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000140 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy2: gpio-controller@11000160 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000160 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy3: gpio-controller@11000180 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000180 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy4: gpio-controller@110001A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110001A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy5: gpio-controller@110001C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110001C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy6: gpio-controller@110001E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110001E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx0: gpio-controller@11000C00 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000C00 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx1: gpio-controller@11000C20 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000C20 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx2: gpio-controller@11000C40 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000C40 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx3: gpio-controller@11000C60 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000C60 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpz: gpio-controller@03860000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x03860000 0x20>;
-			#gpio-cells = <4>;
-		};
-	};
 };
diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
index 21362f48d370..73a0aa27cd56 100644
--- a/drivers/pinctrl/pinctrl-exynos.c
+++ b/drivers/pinctrl/pinctrl-exynos.c
@@ -40,46 +40,46 @@ static const struct of_device_id exynos_wkup_irq_ids[] = {
 
 static void exynos_gpio_irq_unmask(struct irq_data *irqd)
 {
-	struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
-	struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
-	unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset;
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset;
 	unsigned long mask;
 
 	mask = readl(d->virt_base + reg_mask);
-	mask &= ~(1 << edata->pin);
+	mask &= ~(1 << irqd->hwirq);
 	writel(mask, d->virt_base + reg_mask);
 }
 
 static void exynos_gpio_irq_mask(struct irq_data *irqd)
 {
-	struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
-	struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
-	unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset;
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset;
 	unsigned long mask;
 
 	mask = readl(d->virt_base + reg_mask);
-	mask |= 1 << edata->pin;
+	mask |= 1 << irqd->hwirq;
 	writel(mask, d->virt_base + reg_mask);
 }
 
 static void exynos_gpio_irq_ack(struct irq_data *irqd)
 {
-	struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
-	struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
-	unsigned long reg_pend = d->ctrl->geint_pend + edata->eint_offset;
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned long reg_pend = d->ctrl->geint_pend + bank->eint_offset;
 
-	writel(1 << edata->pin, d->virt_base + reg_pend);
+	writel(1 << irqd->hwirq, d->virt_base + reg_pend);
 }
 
 static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
 {
-	struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
 	struct samsung_pin_ctrl *ctrl = d->ctrl;
-	struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
-	struct samsung_pin_bank *bank = edata->bank;
-	unsigned int shift = EXYNOS_EINT_CON_LEN * edata->pin;
+	unsigned int pin = irqd->hwirq;
+	unsigned int shift = EXYNOS_EINT_CON_LEN * pin;
 	unsigned int con, trig_type;
-	unsigned long reg_con = ctrl->geint_con + edata->eint_offset;
+	unsigned long reg_con = ctrl->geint_con + bank->eint_offset;
 	unsigned int mask;
 
 	switch (type) {
@@ -114,7 +114,7 @@ static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
 	writel(con, d->virt_base + reg_con);
 
 	reg_con = bank->pctl_offset;
-	shift = edata->pin * bank->func_width;
+	shift = pin * bank->func_width;
 	mask = (1 << bank->func_width) - 1;
 
 	con = readl(d->virt_base + reg_con);
@@ -136,82 +136,23 @@ static struct irq_chip exynos_gpio_irq_chip = {
 	.irq_set_type	= exynos_gpio_irq_set_type,
 };
 
-/*
- * given a controller-local external gpio interrupt number, prepare the handler
- * data for it.
- */
-static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw,
-				struct samsung_pinctrl_drv_data *d)
-{
-	struct samsung_pin_bank *bank = d->ctrl->pin_banks;
-	struct exynos_geint_data *eint_data;
-	unsigned int nr_banks = d->ctrl->nr_banks, idx;
-	unsigned int irq_base = 0, eint_offset = 0;
-
-	if (hw >= d->ctrl->nr_gint) {
-		dev_err(d->dev, "unsupported ext-gpio interrupt\n");
-		return NULL;
-	}
-
-	for (idx = 0; idx < nr_banks; idx++, bank++) {
-		if (bank->eint_type != EINT_TYPE_GPIO)
-			continue;
-		if ((hw >= irq_base) && (hw < (irq_base + bank->nr_pins)))
-			break;
-		irq_base += bank->nr_pins;
-		eint_offset += 4;
-	}
-
-	if (idx == nr_banks) {
-		dev_err(d->dev, "pin bank not found for ext-gpio interrupt\n");
-		return NULL;
-	}
-
-	eint_data = devm_kzalloc(d->dev, sizeof(*eint_data), GFP_KERNEL);
-	if (!eint_data) {
-		dev_err(d->dev, "no memory for eint-gpio data\n");
-		return NULL;
-	}
-
-	eint_data->bank	= bank;
-	eint_data->pin = hw - irq_base;
-	eint_data->eint_offset = eint_offset;
-	return eint_data;
-}
-
 static int exynos_gpio_irq_map(struct irq_domain *h, unsigned int virq,
 					irq_hw_number_t hw)
 {
-	struct samsung_pinctrl_drv_data *d = h->host_data;
-	struct exynos_geint_data *eint_data;
+	struct samsung_pin_bank *b = h->host_data;
 
-	eint_data = exynos_get_eint_data(hw, d);
-	if (!eint_data)
-		return -EINVAL;
-
-	irq_set_handler_data(virq, eint_data);
-	irq_set_chip_data(virq, h->host_data);
+	irq_set_chip_data(virq, b);
 	irq_set_chip_and_handler(virq, &exynos_gpio_irq_chip,
 					handle_level_irq);
 	set_irq_flags(virq, IRQF_VALID);
 	return 0;
 }
 
-static void exynos_gpio_irq_unmap(struct irq_domain *h, unsigned int virq)
-{
-	struct samsung_pinctrl_drv_data *d = h->host_data;
-	struct exynos_geint_data *eint_data;
-
-	eint_data = irq_get_handler_data(virq);
-	devm_kfree(d->dev, eint_data);
-}
-
 /*
  * irq domain callbacks for external gpio interrupt controller.
  */
 static const struct irq_domain_ops exynos_gpio_irqd_ops = {
 	.map	= exynos_gpio_irq_map,
-	.unmap	= exynos_gpio_irq_unmap,
 	.xlate	= irq_domain_xlate_twocell,
 };
 
@@ -230,7 +171,7 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
 		return IRQ_HANDLED;
 	bank += (group - 1);
 
-	virq = irq_linear_revmap(d->gpio_irqd, bank->irq_base + pin);
+	virq = irq_linear_revmap(bank->irq_domain, pin);
 	if (!virq)
 		return IRQ_NONE;
 	generic_handle_irq(virq);
@@ -243,8 +184,10 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
  */
 static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
 {
+	struct samsung_pin_bank *bank;
 	struct device *dev = d->dev;
 	unsigned int ret;
+	unsigned int i;
 
 	if (!d->irq) {
 		dev_err(dev, "irq number not available\n");
@@ -258,11 +201,16 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
 		return -ENXIO;
 	}
 
-	d->gpio_irqd = irq_domain_add_linear(dev->of_node, d->ctrl->nr_gint,
-				&exynos_gpio_irqd_ops, d);
-	if (!d->gpio_irqd) {
-		dev_err(dev, "gpio irq domain allocation failed\n");
-		return -ENXIO;
+	bank = d->ctrl->pin_banks;
+	for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) {
+		if (bank->eint_type != EINT_TYPE_GPIO)
+			continue;
+		bank->irq_domain = irq_domain_add_linear(bank->of_node,
+				bank->nr_pins, &exynos_gpio_irqd_ops, bank);
+		if (!bank->irq_domain) {
+			dev_err(dev, "gpio irq domain add failed\n");
+			return -ENXIO;
+		}
 	}
 
 	return 0;
@@ -270,48 +218,46 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
 
 static void exynos_wkup_irq_unmask(struct irq_data *irqd)
 {
-	struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
-	unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
-	unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
-	unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2);
+	struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd);
+	struct samsung_pinctrl_drv_data *d = b->drvdata;
+	unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset;
 	unsigned long mask;
 
 	mask = readl(d->virt_base + reg_mask);
-	mask &= ~(1 << pin);
+	mask &= ~(1 << irqd->hwirq);
 	writel(mask, d->virt_base + reg_mask);
 }
 
 static void exynos_wkup_irq_mask(struct irq_data *irqd)
 {
-	struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
-	unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
-	unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
-	unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2);
+	struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd);
+	struct samsung_pinctrl_drv_data *d = b->drvdata;
+	unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset;
 	unsigned long mask;
 
 	mask = readl(d->virt_base + reg_mask);
-	mask |= 1 << pin;
+	mask |= 1 << irqd->hwirq;
 	writel(mask, d->virt_base + reg_mask);
 }
 
 static void exynos_wkup_irq_ack(struct irq_data *irqd)
 {
-	struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
-	unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
-	unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
-	unsigned long pend = d->ctrl->weint_pend + (bank << 2);
+	struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd);
+	struct samsung_pinctrl_drv_data *d = b->drvdata;
+	unsigned long pend = d->ctrl->weint_pend + b->eint_offset;
 
-	writel(1 << pin, d->virt_base + pend);
+	writel(1 << irqd->hwirq, d->virt_base + pend);
 }
 
 static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type)
 {
-	struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
-	unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
-	unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
-	unsigned long reg_con = d->ctrl->weint_con + (bank << 2);
+	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
+	struct samsung_pinctrl_drv_data *d = bank->drvdata;
+	unsigned int pin = irqd->hwirq;
+	unsigned long reg_con = d->ctrl->weint_con + bank->eint_offset;
 	unsigned long shift = EXYNOS_EINT_CON_LEN * pin;
 	unsigned long con, trig_type;
+	unsigned int mask;
 
 	switch (type) {
 	case IRQ_TYPE_EDGE_RISING:
@@ -343,6 +289,16 @@ static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type)
 	con &= ~(EXYNOS_EINT_CON_MASK << shift);
 	con |= trig_type << shift;
 	writel(con, d->virt_base + reg_con);
+
+	reg_con = bank->pctl_offset;
+	shift = pin * bank->func_width;
+	mask = (1 << bank->func_width) - 1;
+
+	con = readl(d->virt_base + reg_con);
+	con &= ~(mask << shift);
+	con |= EXYNOS_EINT_FUNC << shift;
+	writel(con, d->virt_base + reg_con);
+
 	return 0;
 }
 
@@ -361,6 +317,7 @@ static struct irq_chip exynos_wkup_irq_chip = {
 static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
 {
 	struct exynos_weint_data *eintd = irq_get_handler_data(irq);
+	struct samsung_pin_bank *bank = eintd->bank;
 	struct irq_chip *chip = irq_get_chip(irq);
 	int eint_irq;
 
@@ -370,20 +327,20 @@ static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
 	if (chip->irq_ack)
 		chip->irq_ack(&desc->irq_data);
 
-	eint_irq = irq_linear_revmap(eintd->domain, eintd->irq);
+	eint_irq = irq_linear_revmap(bank->irq_domain, eintd->irq);
 	generic_handle_irq(eint_irq);
 	chip->irq_unmask(&desc->irq_data);
 	chained_irq_exit(chip, desc);
 }
 
-static inline void exynos_irq_demux_eint(int irq_base, unsigned long pend,
-					struct irq_domain *domain)
+static inline void exynos_irq_demux_eint(unsigned long pend,
+						struct irq_domain *domain)
 {
 	unsigned int irq;
 
 	while (pend) {
 		irq = fls(pend) - 1;
-		generic_handle_irq(irq_find_mapping(domain, irq_base + irq));
+		generic_handle_irq(irq_find_mapping(domain, irq));
 		pend &= ~(1 << irq);
 	}
 }
@@ -392,18 +349,22 @@ static inline void exynos_irq_demux_eint(int irq_base, unsigned long pend,
 static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
 {
 	struct irq_chip *chip = irq_get_chip(irq);
-	struct exynos_weint_data *eintd = irq_get_handler_data(irq);
-	struct samsung_pinctrl_drv_data *d = eintd->domain->host_data;
+	struct exynos_muxed_weint_data *eintd = irq_get_handler_data(irq);
+	struct samsung_pinctrl_drv_data *d = eintd->banks[0]->drvdata;
+	struct samsung_pin_ctrl *ctrl = d->ctrl;
 	unsigned long pend;
 	unsigned long mask;
+	int i;
 
 	chained_irq_enter(chip, desc);
-	pend = readl(d->virt_base + d->ctrl->weint_pend + 0x8);
-	mask = readl(d->virt_base + d->ctrl->weint_mask + 0x8);
-	exynos_irq_demux_eint(16, pend & ~mask, eintd->domain);
-	pend = readl(d->virt_base + d->ctrl->weint_pend + 0xC);
-	mask = readl(d->virt_base + d->ctrl->weint_mask + 0xC);
-	exynos_irq_demux_eint(24, pend & ~mask, eintd->domain);
+
+	for (i = 0; i < eintd->nr_banks; ++i) {
+		struct samsung_pin_bank *b = eintd->banks[i];
+		pend = readl(d->virt_base + ctrl->weint_pend + b->eint_offset);
+		mask = readl(d->virt_base + ctrl->weint_mask + b->eint_offset);
+		exynos_irq_demux_eint(pend & ~mask, b->irq_domain);
+	}
+
 	chained_irq_exit(chip, desc);
 }
 
@@ -433,7 +394,11 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
 	struct device *dev = d->dev;
 	struct device_node *wkup_np = NULL;
 	struct device_node *np;
+	struct samsung_pin_bank *bank;
 	struct exynos_weint_data *weint_data;
+	struct exynos_muxed_weint_data *muxed_data;
+	unsigned int muxed_banks = 0;
+	unsigned int i;
 	int idx, irq;
 
 	for_each_child_of_node(dev->of_node, np) {
@@ -445,90 +410,124 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
 	if (!wkup_np)
 		return -ENODEV;
 
-	d->wkup_irqd = irq_domain_add_linear(wkup_np, d->ctrl->nr_wint,
-				&exynos_wkup_irqd_ops, d);
-	if (!d->wkup_irqd) {
-		dev_err(dev, "wakeup irq domain allocation failed\n");
-		return -ENXIO;
-	}
+	bank = d->ctrl->pin_banks;
+	for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) {
+		if (bank->eint_type != EINT_TYPE_WKUP)
+			continue;
 
-	weint_data = devm_kzalloc(dev, sizeof(*weint_data) * 17, GFP_KERNEL);
-	if (!weint_data) {
-		dev_err(dev, "could not allocate memory for weint_data\n");
-		return -ENOMEM;
-	}
+		bank->irq_domain = irq_domain_add_linear(bank->of_node,
+				bank->nr_pins, &exynos_wkup_irqd_ops, bank);
+		if (!bank->irq_domain) {
+			dev_err(dev, "wkup irq domain add failed\n");
+			return -ENXIO;
+		}
 
-	irq = irq_of_parse_and_map(wkup_np, 16);
-	if (irq) {
-		weint_data[16].domain = d->wkup_irqd;
-		irq_set_chained_handler(irq, exynos_irq_demux_eint16_31);
-		irq_set_handler_data(irq, &weint_data[16]);
-	} else {
-		dev_err(dev, "irq number for EINT16-32 not found\n");
-	}
+		if (!of_find_property(bank->of_node, "interrupts", NULL)) {
+			bank->eint_type = EINT_TYPE_WKUP_MUX;
+			++muxed_banks;
+			continue;
+		}
 
-	for (idx = 0; idx < 16; idx++) {
-		weint_data[idx].domain = d->wkup_irqd;
-		weint_data[idx].irq = idx;
+		weint_data = devm_kzalloc(dev, bank->nr_pins
+					* sizeof(*weint_data), GFP_KERNEL);
+		if (!weint_data) {
+			dev_err(dev, "could not allocate memory for weint_data\n");
+			return -ENOMEM;
+		}
 
-		irq = irq_of_parse_and_map(wkup_np, idx);
-		if (irq) {
+		for (idx = 0; idx < bank->nr_pins; ++idx) {
+			irq = irq_of_parse_and_map(bank->of_node, idx);
+			if (!irq) {
+				dev_err(dev, "irq number for eint-%s-%d not found\n",
+							bank->name, idx);
+				continue;
+			}
+			weint_data[idx].irq = idx;
+			weint_data[idx].bank = bank;
 			irq_set_handler_data(irq, &weint_data[idx]);
 			irq_set_chained_handler(irq, exynos_irq_eint0_15);
-		} else {
-			dev_err(dev, "irq number for eint-%x not found\n", idx);
 		}
 	}
+
+	if (!muxed_banks)
+		return 0;
+
+	irq = irq_of_parse_and_map(wkup_np, 0);
+	if (!irq) {
+		dev_err(dev, "irq number for muxed EINTs not found\n");
+		return 0;
+	}
+
+	muxed_data = devm_kzalloc(dev, sizeof(*muxed_data)
+		+ muxed_banks*sizeof(struct samsung_pin_bank *), GFP_KERNEL);
+	if (!muxed_data) {
+		dev_err(dev, "could not allocate memory for muxed_data\n");
+		return -ENOMEM;
+	}
+
+	irq_set_chained_handler(irq, exynos_irq_demux_eint16_31);
+	irq_set_handler_data(irq, muxed_data);
+
+	bank = d->ctrl->pin_banks;
+	idx = 0;
+	for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) {
+		if (bank->eint_type != EINT_TYPE_WKUP_MUX)
+			continue;
+
+		muxed_data->banks[idx++] = bank;
+	}
+	muxed_data->nr_banks = muxed_banks;
+
 	return 0;
 }
 
 /* pin banks of exynos4210 pin-controller 0 */
 static struct samsung_pin_bank exynos4210_pin_banks0[] = {
-	EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_A0, "gpa0"),
-	EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_A1, "gpa1"),
-	EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_B, "gpb"),
-	EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_C0, "gpc0"),
-	EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_C1, "gpc1"),
-	EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_D0, "gpd0"),
-	EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_D1, "gpd1"),
-	EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_E0, "gpe0"),
-	EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_E1, "gpe1"),
-	EXYNOS_PIN_BANK_EINTG(0x120, EXYNOS4210_GPIO_E2, "gpe2"),
-	EXYNOS_PIN_BANK_EINTG(0x140, EXYNOS4210_GPIO_E3, "gpe3"),
-	EXYNOS_PIN_BANK_EINTG(0x160, EXYNOS4210_GPIO_E4, "gpe4"),
-	EXYNOS_PIN_BANK_EINTG(0x180, EXYNOS4210_GPIO_F0, "gpf0"),
-	EXYNOS_PIN_BANK_EINTG(0x1A0, EXYNOS4210_GPIO_F1, "gpf1"),
-	EXYNOS_PIN_BANK_EINTG(0x1C0, EXYNOS4210_GPIO_F2, "gpf2"),
-	EXYNOS_PIN_BANK_EINTG(0x1E0, EXYNOS4210_GPIO_F3, "gpf3"),
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08),
+	EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18),
+	EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0", 0x1c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1", 0x20),
+	EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpe2", 0x24),
+	EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe3", 0x28),
+	EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpe4", 0x2c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30),
+	EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34),
+	EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38),
+	EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c),
 };
 
 /* pin banks of exynos4210 pin-controller 1 */
 static struct samsung_pin_bank exynos4210_pin_banks1[] = {
-	EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_J0, "gpj0"),
-	EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_J1, "gpj1"),
-	EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_K0, "gpk0"),
-	EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_K1, "gpk1"),
-	EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_K2, "gpk2"),
-	EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_K3, "gpk3"),
-	EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_L0, "gpl0"),
-	EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_L1, "gpl1"),
-	EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_L2, "gpl2"),
-	EXYNOS_PIN_BANK_EINTN(0x120, EXYNOS4210_GPIO_Y0, "gpy0"),
-	EXYNOS_PIN_BANK_EINTN(0x140, EXYNOS4210_GPIO_Y1, "gpy1"),
-	EXYNOS_PIN_BANK_EINTN(0x160, EXYNOS4210_GPIO_Y2, "gpy2"),
-	EXYNOS_PIN_BANK_EINTN(0x180, EXYNOS4210_GPIO_Y3, "gpy3"),
-	EXYNOS_PIN_BANK_EINTN(0x1A0, EXYNOS4210_GPIO_Y4, "gpy4"),
-	EXYNOS_PIN_BANK_EINTN(0x1C0, EXYNOS4210_GPIO_Y5, "gpy5"),
-	EXYNOS_PIN_BANK_EINTN(0x1E0, EXYNOS4210_GPIO_Y6, "gpy6"),
-	EXYNOS_PIN_BANK_EINTN(0xC00, EXYNOS4210_GPIO_X0, "gpx0"),
-	EXYNOS_PIN_BANK_EINTN(0xC20, EXYNOS4210_GPIO_X1, "gpx1"),
-	EXYNOS_PIN_BANK_EINTN(0xC40, EXYNOS4210_GPIO_X2, "gpx2"),
-	EXYNOS_PIN_BANK_EINTN(0xC60, EXYNOS4210_GPIO_X3, "gpx3"),
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08),
+	EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10),
+	EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpl0", 0x18),
+	EXYNOS_PIN_BANK_EINTG(3, 0x0E0, "gpl1", 0x1c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20),
+	EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"),
+	EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"),
+	EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
 };
 
 /* pin banks of exynos4210 pin-controller 2 */
 static struct samsung_pin_bank exynos4210_pin_banks2[] = {
-	EXYNOS_PIN_BANK_EINTN(0x000, EXYNOS4210_GPIO_Z, "gpz"),
+	EXYNOS_PIN_BANK_EINTN(7, 0x000, "gpz"),
 };
 
 /*
@@ -540,9 +539,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = {
 		/* pin-controller instance 0 data */
 		.pin_banks	= exynos4210_pin_banks0,
 		.nr_banks	= ARRAY_SIZE(exynos4210_pin_banks0),
-		.base		= EXYNOS4210_GPIO_A0_START,
-		.nr_pins	= EXYNOS4210_GPIOA_NR_PINS,
-		.nr_gint	= EXYNOS4210_GPIOA_NR_GINT,
 		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
 		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
 		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
@@ -553,10 +549,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = {
 		/* pin-controller instance 1 data */
 		.pin_banks	= exynos4210_pin_banks1,
 		.nr_banks	= ARRAY_SIZE(exynos4210_pin_banks1),
-		.base		= EXYNOS4210_GPIOA_NR_PINS,
-		.nr_pins	= EXYNOS4210_GPIOB_NR_PINS,
-		.nr_gint	= EXYNOS4210_GPIOB_NR_GINT,
-		.nr_wint	= 32,
 		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
 		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
 		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
@@ -571,9 +563,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = {
 		/* pin-controller instance 2 data */
 		.pin_banks	= exynos4210_pin_banks2,
 		.nr_banks	= ARRAY_SIZE(exynos4210_pin_banks2),
-		.base		= EXYNOS4210_GPIOA_NR_PINS +
-					EXYNOS4210_GPIOB_NR_PINS,
-		.nr_pins	= EXYNOS4210_GPIOC_NR_PINS,
 		.label		= "exynos4210-gpio-ctrl2",
 	},
 };
diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h
index 31d0a06174e4..0a708890d8b4 100644
--- a/drivers/pinctrl/pinctrl-exynos.h
+++ b/drivers/pinctrl/pinctrl-exynos.h
@@ -17,125 +17,6 @@
  * (at your option) any later version.
  */
 
-#define EXYNOS_GPIO_START(__gpio)	((__gpio##_START) + (__gpio##_NR))
-
-#define EXYNOS4210_GPIO_A0_NR	(8)
-#define EXYNOS4210_GPIO_A1_NR	(6)
-#define EXYNOS4210_GPIO_B_NR	(8)
-#define EXYNOS4210_GPIO_C0_NR	(5)
-#define EXYNOS4210_GPIO_C1_NR	(5)
-#define EXYNOS4210_GPIO_D0_NR	(4)
-#define EXYNOS4210_GPIO_D1_NR	(4)
-#define EXYNOS4210_GPIO_E0_NR	(5)
-#define EXYNOS4210_GPIO_E1_NR	(8)
-#define EXYNOS4210_GPIO_E2_NR	(6)
-#define EXYNOS4210_GPIO_E3_NR	(8)
-#define EXYNOS4210_GPIO_E4_NR	(8)
-#define EXYNOS4210_GPIO_F0_NR	(8)
-#define EXYNOS4210_GPIO_F1_NR	(8)
-#define EXYNOS4210_GPIO_F2_NR	(8)
-#define EXYNOS4210_GPIO_F3_NR	(6)
-#define EXYNOS4210_GPIO_J0_NR	(8)
-#define EXYNOS4210_GPIO_J1_NR	(5)
-#define EXYNOS4210_GPIO_K0_NR	(7)
-#define EXYNOS4210_GPIO_K1_NR	(7)
-#define EXYNOS4210_GPIO_K2_NR	(7)
-#define EXYNOS4210_GPIO_K3_NR	(7)
-#define EXYNOS4210_GPIO_L0_NR	(8)
-#define EXYNOS4210_GPIO_L1_NR	(3)
-#define EXYNOS4210_GPIO_L2_NR	(8)
-#define EXYNOS4210_GPIO_Y0_NR	(6)
-#define EXYNOS4210_GPIO_Y1_NR	(4)
-#define EXYNOS4210_GPIO_Y2_NR	(6)
-#define EXYNOS4210_GPIO_Y3_NR	(8)
-#define EXYNOS4210_GPIO_Y4_NR	(8)
-#define EXYNOS4210_GPIO_Y5_NR	(8)
-#define EXYNOS4210_GPIO_Y6_NR	(8)
-#define EXYNOS4210_GPIO_X0_NR	(8)
-#define EXYNOS4210_GPIO_X1_NR	(8)
-#define EXYNOS4210_GPIO_X2_NR	(8)
-#define EXYNOS4210_GPIO_X3_NR	(8)
-#define EXYNOS4210_GPIO_Z_NR	(7)
-
-enum exynos4210_gpio_xa_start {
-	EXYNOS4210_GPIO_A0_START	= 0,
-	EXYNOS4210_GPIO_A1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_A0),
-	EXYNOS4210_GPIO_B_START		= EXYNOS_GPIO_START(EXYNOS4210_GPIO_A1),
-	EXYNOS4210_GPIO_C0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_B),
-	EXYNOS4210_GPIO_C1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_C0),
-	EXYNOS4210_GPIO_D0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_C1),
-	EXYNOS4210_GPIO_D1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_D0),
-	EXYNOS4210_GPIO_E0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_D1),
-	EXYNOS4210_GPIO_E1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_E0),
-	EXYNOS4210_GPIO_E2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_E1),
-	EXYNOS4210_GPIO_E3_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_E2),
-	EXYNOS4210_GPIO_E4_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_E3),
-	EXYNOS4210_GPIO_F0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_E4),
-	EXYNOS4210_GPIO_F1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_F0),
-	EXYNOS4210_GPIO_F2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_F1),
-	EXYNOS4210_GPIO_F3_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_F2),
-};
-
-enum exynos4210_gpio_xb_start {
-	EXYNOS4210_GPIO_J0_START	= 0,
-	EXYNOS4210_GPIO_J1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_J0),
-	EXYNOS4210_GPIO_K0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_J1),
-	EXYNOS4210_GPIO_K1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_K0),
-	EXYNOS4210_GPIO_K2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_K1),
-	EXYNOS4210_GPIO_K3_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_K2),
-	EXYNOS4210_GPIO_L0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_K3),
-	EXYNOS4210_GPIO_L1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_L0),
-	EXYNOS4210_GPIO_L2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_L1),
-	EXYNOS4210_GPIO_Y0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2),
-	EXYNOS4210_GPIO_Y1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y0),
-	EXYNOS4210_GPIO_Y2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y1),
-	EXYNOS4210_GPIO_Y3_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y2),
-	EXYNOS4210_GPIO_Y4_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y3),
-	EXYNOS4210_GPIO_Y5_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y4),
-	EXYNOS4210_GPIO_Y6_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y5),
-	EXYNOS4210_GPIO_X0_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y6),
-	EXYNOS4210_GPIO_X1_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_X0),
-	EXYNOS4210_GPIO_X2_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_X1),
-	EXYNOS4210_GPIO_X3_START	= EXYNOS_GPIO_START(EXYNOS4210_GPIO_X2),
-};
-
-enum exynos4210_gpio_xc_start {
-	EXYNOS4210_GPIO_Z_START		= 0,
-};
-
-#define	EXYNOS4210_GPIO_A0_IRQ		EXYNOS4210_GPIO_A0_START
-#define	EXYNOS4210_GPIO_A1_IRQ		EXYNOS4210_GPIO_A1_START
-#define	EXYNOS4210_GPIO_B_IRQ		EXYNOS4210_GPIO_B_START
-#define	EXYNOS4210_GPIO_C0_IRQ		EXYNOS4210_GPIO_C0_START
-#define	EXYNOS4210_GPIO_C1_IRQ		EXYNOS4210_GPIO_C1_START
-#define	EXYNOS4210_GPIO_D0_IRQ		EXYNOS4210_GPIO_D0_START
-#define	EXYNOS4210_GPIO_D1_IRQ		EXYNOS4210_GPIO_D1_START
-#define	EXYNOS4210_GPIO_E0_IRQ		EXYNOS4210_GPIO_E0_START
-#define	EXYNOS4210_GPIO_E1_IRQ		EXYNOS4210_GPIO_E1_START
-#define	EXYNOS4210_GPIO_E2_IRQ		EXYNOS4210_GPIO_E2_START
-#define	EXYNOS4210_GPIO_E3_IRQ		EXYNOS4210_GPIO_E3_START
-#define	EXYNOS4210_GPIO_E4_IRQ		EXYNOS4210_GPIO_E4_START
-#define	EXYNOS4210_GPIO_F0_IRQ		EXYNOS4210_GPIO_F0_START
-#define	EXYNOS4210_GPIO_F1_IRQ		EXYNOS4210_GPIO_F1_START
-#define	EXYNOS4210_GPIO_F2_IRQ		EXYNOS4210_GPIO_F2_START
-#define	EXYNOS4210_GPIO_F3_IRQ		EXYNOS4210_GPIO_F3_START
-#define	EXYNOS4210_GPIO_J0_IRQ		EXYNOS4210_GPIO_J0_START
-#define	EXYNOS4210_GPIO_J1_IRQ		EXYNOS4210_GPIO_J1_START
-#define	EXYNOS4210_GPIO_K0_IRQ		EXYNOS4210_GPIO_K0_START
-#define	EXYNOS4210_GPIO_K1_IRQ		EXYNOS4210_GPIO_K1_START
-#define	EXYNOS4210_GPIO_K2_IRQ		EXYNOS4210_GPIO_K2_START
-#define	EXYNOS4210_GPIO_K3_IRQ		EXYNOS4210_GPIO_K3_START
-#define	EXYNOS4210_GPIO_L0_IRQ		EXYNOS4210_GPIO_L0_START
-#define	EXYNOS4210_GPIO_L1_IRQ		EXYNOS4210_GPIO_L1_START
-#define	EXYNOS4210_GPIO_L2_IRQ		EXYNOS4210_GPIO_L2_START
-#define	EXYNOS4210_GPIO_Z_IRQ		EXYNOS4210_GPIO_Z_START
-
-#define EXYNOS4210_GPIOA_NR_PINS	EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3)
-#define EXYNOS4210_GPIOA_NR_GINT	EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3)
-#define EXYNOS4210_GPIOB_NR_PINS	EXYNOS_GPIO_START(EXYNOS4210_GPIO_X3)
-#define EXYNOS4210_GPIOB_NR_GINT	EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2)
-#define EXYNOS4210_GPIOC_NR_PINS	EXYNOS_GPIO_START(EXYNOS4210_GPIO_Z)
-
 /* External GPIO and wakeup interrupt related definitions */
 #define EXYNOS_GPIO_ECON_OFFSET		0x700
 #define EXYNOS_GPIO_EMASK_OFFSET	0x900
@@ -165,11 +46,10 @@ enum exynos4210_gpio_xc_start {
 #define EXYNOS_EINT_MAX_PER_BANK	8
 #define EXYNOS_EINT_NR_WKUP_EINT
 
-#define EXYNOS_PIN_BANK_EINTN(reg, __gpio, id)		\
+#define EXYNOS_PIN_BANK_EINTN(pins, reg, id)		\
 	{						\
 		.pctl_offset	= reg,			\
-		.pin_base	= (__gpio##_START),	\
-		.nr_pins	= (__gpio##_NR),	\
+		.nr_pins	= pins,			\
 		.func_width	= 4,			\
 		.pud_width	= 2,			\
 		.drv_width	= 2,			\
@@ -179,40 +59,50 @@ enum exynos4210_gpio_xc_start {
 		.name		= id			\
 	}
 
-#define EXYNOS_PIN_BANK_EINTG(reg, __gpio, id)		\
+#define EXYNOS_PIN_BANK_EINTG(pins, reg, id, offs)	\
 	{						\
 		.pctl_offset	= reg,			\
-		.pin_base	= (__gpio##_START),	\
-		.nr_pins	= (__gpio##_NR),	\
+		.nr_pins	= pins,			\
 		.func_width	= 4,			\
 		.pud_width	= 2,			\
 		.drv_width	= 2,			\
 		.conpdn_width	= 2,			\
 		.pudpdn_width	= 2,			\
 		.eint_type	= EINT_TYPE_GPIO,	\
-		.irq_base	= (__gpio##_IRQ),	\
+		.eint_offset	= offs,			\
 		.name		= id			\
 	}
 
-/**
- * struct exynos_geint_data: gpio eint specific data for irq_chip callbacks.
- * @bank: pin bank from which this gpio interrupt originates.
- * @pin: pin number within the bank.
- * @eint_offset: offset to be added to the con/pend/mask register bank base.
- */
-struct exynos_geint_data {
-	struct samsung_pin_bank	*bank;
-	u32			pin;
-	u32			eint_offset;
-};
+#define EXYNOS_PIN_BANK_EINTW(pins, reg, id, offs)	\
+	{						\
+		.pctl_offset	= reg,			\
+		.nr_pins	= pins,			\
+		.func_width	= 4,			\
+		.pud_width	= 2,			\
+		.drv_width	= 2,			\
+		.eint_type	= EINT_TYPE_WKUP,	\
+		.eint_offset	= offs,			\
+		.name		= id			\
+	}
 
 /**
  * struct exynos_weint_data: irq specific data for all the wakeup interrupts
  * generated by the external wakeup interrupt controller.
- * @domain: irq domain representing the external wakeup interrupts
  * @irq: interrupt number within the domain.
+ * @bank: bank responsible for this interrupt
  */
 struct exynos_weint_data {
-	struct irq_domain	*domain;
-	u32			irq;
+	unsigned int irq;
+	struct samsung_pin_bank *bank;
+};
+
+/**
+ * struct exynos_muxed_weint_data: irq specific data for muxed wakeup interrupts
+ * generated by the external wakeup interrupt controller.
+ * @nr_banks: count of banks being part of the mux
+ * @banks: array of banks being part of the mux
+ */
+struct exynos_muxed_weint_data {
+	unsigned int nr_banks;
+	struct samsung_pin_bank *banks[];
 };
diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c
index 861cd5f04d5e..fc34cac8a1b0 100644
--- a/drivers/pinctrl/pinctrl-samsung.c
+++ b/drivers/pinctrl/pinctrl-samsung.c
@@ -26,6 +26,7 @@
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/irqdomain.h>
 
 #include "core.h"
 #include "pinctrl-samsung.h"
@@ -46,6 +47,13 @@ struct pin_config {
 	{ "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN },
 };
 
+static unsigned int pin_base = 0;
+
+static inline struct samsung_pin_bank *gc_to_pin_bank(struct gpio_chip *gc)
+{
+	return container_of(gc, struct samsung_pin_bank, gpio_chip);
+}
+
 /* check if the selector is a valid pin group selector */
 static int samsung_get_group_count(struct pinctrl_dev *pctldev)
 {
@@ -250,14 +258,12 @@ static int samsung_pinmux_get_groups(struct pinctrl_dev *pctldev,
  * given a pin number that is local to a pin controller, find out the pin bank
  * and the register base of the pin bank.
  */
-static void pin_to_reg_bank(struct gpio_chip *gc, unsigned pin,
-			void __iomem **reg, u32 *offset,
+static void pin_to_reg_bank(struct samsung_pinctrl_drv_data *drvdata,
+			unsigned pin, void __iomem **reg, u32 *offset,
 			struct samsung_pin_bank **bank)
 {
-	struct samsung_pinctrl_drv_data *drvdata;
 	struct samsung_pin_bank *b;
 
-	drvdata = dev_get_drvdata(gc->dev);
 	b = drvdata->ctrl->pin_banks;
 
 	while ((pin >= b->pin_base) &&
@@ -292,7 +298,7 @@ static void samsung_pinmux_setup(struct pinctrl_dev *pctldev, unsigned selector,
 	 * pin function number in the config register.
 	 */
 	for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++) {
-		pin_to_reg_bank(drvdata->gc, pins[cnt] - drvdata->ctrl->base,
+		pin_to_reg_bank(drvdata, pins[cnt] - drvdata->ctrl->base,
 				&reg, &pin_offset, &bank);
 		mask = (1 << bank->func_width) - 1;
 		shift = pin_offset * bank->func_width;
@@ -329,10 +335,16 @@ static int samsung_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
 		struct pinctrl_gpio_range *range, unsigned offset, bool input)
 {
 	struct samsung_pin_bank *bank;
+	struct samsung_pinctrl_drv_data *drvdata;
 	void __iomem *reg;
 	u32 data, pin_offset, mask, shift;
 
-	pin_to_reg_bank(range->gc, offset, &reg, &pin_offset, &bank);
+	bank = gc_to_pin_bank(range->gc);
+	drvdata = pinctrl_dev_get_drvdata(pctldev);
+
+	pin_offset = offset - bank->pin_base;
+	reg = drvdata->virt_base + bank->pctl_offset;
+
 	mask = (1 << bank->func_width) - 1;
 	shift = pin_offset * bank->func_width;
 
@@ -366,7 +378,7 @@ static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin,
 	u32 cfg_value, cfg_reg;
 
 	drvdata = pinctrl_dev_get_drvdata(pctldev);
-	pin_to_reg_bank(drvdata->gc, pin - drvdata->ctrl->base, &reg_base,
+	pin_to_reg_bank(drvdata, pin - drvdata->ctrl->base, &reg_base,
 					&pin_offset, &bank);
 
 	switch (cfg_type) {
@@ -391,6 +403,9 @@ static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin,
 		return -EINVAL;
 	}
 
+	if (!width)
+		return -EINVAL;
+
 	mask = (1 << width) - 1;
 	shift = pin_offset * width;
 	data = readl(reg_base + cfg_reg);
@@ -463,14 +478,16 @@ static struct pinconf_ops samsung_pinconf_ops = {
 /* gpiolib gpio_set callback function */
 static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
 {
+	struct samsung_pin_bank *bank = gc_to_pin_bank(gc);
 	void __iomem *reg;
-	u32 pin_offset, data;
+	u32 data;
+
+	reg = bank->drvdata->virt_base + bank->pctl_offset;
 
-	pin_to_reg_bank(gc, offset, &reg, &pin_offset, NULL);
 	data = readl(reg + DAT_REG);
-	data &= ~(1 << pin_offset);
+	data &= ~(1 << offset);
 	if (value)
-		data |= 1 << pin_offset;
+		data |= 1 << offset;
 	writel(data, reg + DAT_REG);
 }
 
@@ -478,11 +495,13 @@ static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
 static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset)
 {
 	void __iomem *reg;
-	u32 pin_offset, data;
+	u32 data;
+	struct samsung_pin_bank *bank = gc_to_pin_bank(gc);
+
+	reg = bank->drvdata->virt_base + bank->pctl_offset;
 
-	pin_to_reg_bank(gc, offset, &reg, &pin_offset, NULL);
 	data = readl(reg + DAT_REG);
-	data >>= pin_offset;
+	data >>= offset;
 	data &= 1;
 	return data;
 }
@@ -510,6 +529,23 @@ static int samsung_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
 }
 
 /*
+ * gpiolib gpio_to_irq callback function. Creates a mapping between a GPIO pin
+ * and a virtual IRQ, if not already present.
+ */
+static int samsung_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct samsung_pin_bank *bank = gc_to_pin_bank(gc);
+	unsigned int virq;
+
+	if (!bank->irq_domain)
+		return -ENXIO;
+
+	virq = irq_create_mapping(bank->irq_domain, offset);
+
+	return (virq) ? : -ENXIO;
+}
+
+/*
  * Parse the pin names listed in the 'samsung,pins' property and convert it
  * into a list of gpio numbers are create a pin group from it.
  */
@@ -597,7 +633,7 @@ static int __devinit samsung_pinctrl_parse_dt(struct platform_device *pdev,
 	 */
 	for_each_child_of_node(dev_np, cfg_np) {
 		u32 function;
-		if (of_find_property(cfg_np, "interrupt-controller", NULL))
+		if (!of_find_property(cfg_np, "samsung,pins", NULL))
 			continue;
 
 		ret = samsung_pinctrl_parse_dt_pins(pdev, cfg_np,
@@ -712,12 +748,16 @@ static int __devinit samsung_pinctrl_register(struct platform_device *pdev,
 		return -EINVAL;
 	}
 
-	drvdata->grange.name = "samsung-pctrl-gpio-range";
-	drvdata->grange.id = 0;
-	drvdata->grange.base = drvdata->ctrl->base;
-	drvdata->grange.npins = drvdata->ctrl->nr_pins;
-	drvdata->grange.gc = drvdata->gc;
-	pinctrl_add_gpio_range(drvdata->pctl_dev, &drvdata->grange);
+	for (bank = 0; bank < drvdata->ctrl->nr_banks; ++bank) {
+		pin_bank = &drvdata->ctrl->pin_banks[bank];
+		pin_bank->grange.name = pin_bank->name;
+		pin_bank->grange.id = bank;
+		pin_bank->grange.pin_base = pin_bank->pin_base;
+		pin_bank->grange.base = pin_bank->gpio_chip.base;
+		pin_bank->grange.npins = pin_bank->gpio_chip.ngpio;
+		pin_bank->grange.gc = &pin_bank->gpio_chip;
+		pinctrl_add_gpio_range(drvdata->pctl_dev, &pin_bank->grange);
+	}
 
 	ret = samsung_pinctrl_parse_dt(pdev, drvdata);
 	if (ret) {
@@ -728,68 +768,117 @@ static int __devinit samsung_pinctrl_register(struct platform_device *pdev,
 	return 0;
 }
 
+static const struct gpio_chip samsung_gpiolib_chip = {
+	.set = samsung_gpio_set,
+	.get = samsung_gpio_get,
+	.direction_input = samsung_gpio_direction_input,
+	.direction_output = samsung_gpio_direction_output,
+	.to_irq = samsung_gpio_to_irq,
+	.owner = THIS_MODULE,
+};
+
 /* register the gpiolib interface with the gpiolib subsystem */
 static int __devinit samsung_gpiolib_register(struct platform_device *pdev,
 				struct samsung_pinctrl_drv_data *drvdata)
 {
+	struct samsung_pin_ctrl *ctrl = drvdata->ctrl;
+	struct samsung_pin_bank *bank = ctrl->pin_banks;
 	struct gpio_chip *gc;
 	int ret;
-
-	gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
-	if (!gc) {
-		dev_err(&pdev->dev, "mem alloc for gpio_chip failed\n");
-		return -ENOMEM;
-	}
-
-	drvdata->gc = gc;
-	gc->base = drvdata->ctrl->base;
-	gc->ngpio = drvdata->ctrl->nr_pins;
-	gc->dev = &pdev->dev;
-	gc->set = samsung_gpio_set;
-	gc->get = samsung_gpio_get;
-	gc->direction_input = samsung_gpio_direction_input;
-	gc->direction_output = samsung_gpio_direction_output;
-	gc->label = drvdata->ctrl->label;
-	gc->owner = THIS_MODULE;
-	ret = gpiochip_add(gc);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register gpio_chip %s, error "
-					"code: %d\n", gc->label, ret);
-		return ret;
+	int i;
+
+	for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
+		bank->gpio_chip = samsung_gpiolib_chip;
+
+		gc = &bank->gpio_chip;
+		gc->base = ctrl->base + bank->pin_base;
+		gc->ngpio = bank->nr_pins;
+		gc->dev = &pdev->dev;
+		gc->of_node = bank->of_node;
+		gc->label = bank->name;
+
+		ret = gpiochip_add(gc);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to register gpio_chip %s, error code: %d\n",
+							gc->label, ret);
+			goto fail;
+		}
 	}
 
 	return 0;
+
+fail:
+	for (--i, --bank; i >= 0; --i, --bank)
+		if (gpiochip_remove(&bank->gpio_chip))
+			dev_err(&pdev->dev, "gpio chip %s remove failed\n",
+							bank->gpio_chip.label);
+	return ret;
 }
 
 /* unregister the gpiolib interface with the gpiolib subsystem */
 static int __devinit samsung_gpiolib_unregister(struct platform_device *pdev,
 				struct samsung_pinctrl_drv_data *drvdata)
 {
-	int ret = gpiochip_remove(drvdata->gc);
-	if (ret) {
+	struct samsung_pin_ctrl *ctrl = drvdata->ctrl;
+	struct samsung_pin_bank *bank = ctrl->pin_banks;
+	int ret = 0;
+	int i;
+
+	for (i = 0; !ret && i < ctrl->nr_banks; ++i, ++bank)
+		ret = gpiochip_remove(&bank->gpio_chip);
+
+	if (ret)
 		dev_err(&pdev->dev, "gpio chip remove failed\n");
-		return ret;
-	}
-	return 0;
+
+	return ret;
 }
 
 static const struct of_device_id samsung_pinctrl_dt_match[];
 
 /* retrieve the soc specific data */
 static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data(
+				struct samsung_pinctrl_drv_data *d,
 				struct platform_device *pdev)
 {
 	int id;
 	const struct of_device_id *match;
-	const struct device_node *node = pdev->dev.of_node;
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *np;
+	struct samsung_pin_ctrl *ctrl;
+	struct samsung_pin_bank *bank;
+	int i;
 
-	id = of_alias_get_id(pdev->dev.of_node, "pinctrl");
+	id = of_alias_get_id(node, "pinctrl");
 	if (id < 0) {
 		dev_err(&pdev->dev, "failed to get alias id\n");
 		return NULL;
 	}
 	match = of_match_node(samsung_pinctrl_dt_match, node);
-	return (struct samsung_pin_ctrl *)match->data + id;
+	ctrl = (struct samsung_pin_ctrl *)match->data + id;
+
+	bank = ctrl->pin_banks;
+	for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
+		bank->drvdata = d;
+		bank->pin_base = ctrl->nr_pins;
+		ctrl->nr_pins += bank->nr_pins;
+	}
+
+	for_each_child_of_node(node, np) {
+		if (!of_find_property(np, "gpio-controller", NULL))
+			continue;
+		bank = ctrl->pin_banks;
+		for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
+			if (!strcmp(bank->name, np->name)) {
+				bank->of_node = np;
+				break;
+			}
+		}
+	}
+
+	ctrl->base = pin_base;
+	pin_base += ctrl->nr_pins;
+
+	return ctrl;
 }
 
 static int __devinit samsung_pinctrl_probe(struct platform_device *pdev)
@@ -805,18 +894,18 @@ static int __devinit samsung_pinctrl_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	ctrl = samsung_pinctrl_get_soc_data(pdev);
-	if (!ctrl) {
-		dev_err(&pdev->dev, "driver data not available\n");
-		return -EINVAL;
-	}
-
 	drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
 	if (!drvdata) {
 		dev_err(dev, "failed to allocate memory for driver's "
 				"private data\n");
 		return -ENOMEM;
 	}
+
+	ctrl = samsung_pinctrl_get_soc_data(drvdata, pdev);
+	if (!ctrl) {
+		dev_err(&pdev->dev, "driver data not available\n");
+		return -EINVAL;
+	}
 	drvdata->ctrl = ctrl;
 	drvdata->dev = dev;
 
diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h
index b8956934cda6..0670d9ea43fa 100644
--- a/drivers/pinctrl/pinctrl-samsung.h
+++ b/drivers/pinctrl/pinctrl-samsung.h
@@ -23,6 +23,8 @@
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/machine.h>
 
+#include <linux/gpio.h>
+
 /* register offsets within a pin bank */
 #define DAT_REG		0x4
 #define PUD_REG		0x8
@@ -64,6 +66,7 @@ enum pincfg_type {
  * @EINT_TYPE_NONE: bank does not support external interrupts
  * @EINT_TYPE_GPIO: bank supportes external gpio interrupts
  * @EINT_TYPE_WKUP: bank supportes external wakeup interrupts
+ * @EINT_TYPE_WKUP_MUX: bank supports multiplexed external wakeup interrupts
  *
  * Samsung GPIO controller groups all the available pins into banks. The pins
  * in a pin bank can support external gpio interrupts or external wakeup
@@ -76,6 +79,7 @@ enum eint_type {
 	EINT_TYPE_NONE,
 	EINT_TYPE_GPIO,
 	EINT_TYPE_WKUP,
+	EINT_TYPE_WKUP_MUX,
 };
 
 /* maximum length of a pin in pin descriptor (example: "gpa0-0") */
@@ -109,8 +113,12 @@ struct samsung_pinctrl_drv_data;
  * @conpdn_width: width of the sleep mode function selector bin field.
  * @pudpdn_width: width of the sleep mode pull up/down selector bit field.
  * @eint_type: type of the external interrupt supported by the bank.
- * @irq_base: starting controller local irq number of the bank.
  * @name: name to be prefixed for each pin in this pin bank.
+ * @of_node: OF node of the bank.
+ * @drvdata: link to controller driver data
+ * @irq_domain: IRQ domain of the bank.
+ * @gpio_chip: GPIO chip of the bank.
+ * @grange: linux gpio pin range supported by this bank.
  */
 struct samsung_pin_bank {
 	u32		pctl_offset;
@@ -122,8 +130,13 @@ struct samsung_pin_bank {
 	u8		conpdn_width;
 	u8		pudpdn_width;
 	enum eint_type	eint_type;
-	u32		irq_base;
+	u32		eint_offset;
 	char		*name;
+	struct device_node *of_node;
+	struct samsung_pinctrl_drv_data *drvdata;
+	struct irq_domain *irq_domain;
+	struct gpio_chip gpio_chip;
+	struct pinctrl_gpio_range grange;
 };
 
 /**
@@ -132,8 +145,6 @@ struct samsung_pin_bank {
  * @nr_banks: number of pin banks.
  * @base: starting system wide pin number.
  * @nr_pins: number of pins supported by the controller.
- * @nr_gint: number of external gpio interrupts supported.
- * @nr_wint: number of external wakeup interrupts supported.
  * @geint_con: offset of the ext-gpio controller registers.
  * @geint_mask: offset of the ext-gpio interrupt mask registers.
  * @geint_pend: offset of the ext-gpio interrupt pending registers.
@@ -153,8 +164,6 @@ struct samsung_pin_ctrl {
 
 	u32		base;
 	u32		nr_pins;
-	u32		nr_gint;
-	u32		nr_wint;
 
 	u32		geint_con;
 	u32		geint_mask;
@@ -183,8 +192,6 @@ struct samsung_pin_ctrl {
  * @nr_groups: number of such pin groups.
  * @pmx_functions: list of pin functions available to the driver.
  * @nr_function: number of such pin functions.
- * @gc: gpio_chip instance registered with gpiolib.
- * @grange: linux gpio pin range supported by this controller.
  */
 struct samsung_pinctrl_drv_data {
 	void __iomem			*virt_base;
@@ -199,12 +206,6 @@ struct samsung_pinctrl_drv_data {
 	unsigned int			nr_groups;
 	const struct samsung_pmx_func	*pmx_functions;
 	unsigned int			nr_functions;
-
-	struct irq_domain		*gpio_irqd;
-	struct irq_domain		*wkup_irqd;
-
-	struct gpio_chip		*gc;
-	struct pinctrl_gpio_range	grange;
 };
 
 /**