summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>2014-12-12 11:46:40 -0800
committerPeter Huewe <peterhuewe@gmx.de>2015-01-17 14:00:12 +0100
commitaec04cbdf7231c1b0da76172de82dfa2388a80d7 (patch)
treec669ac6cceb4ada22d1178419c2d111db6ed2393
parent30fc8d138e9123f374a3c3867e7c7c5cd4004941 (diff)
downloadblackbird-op-linux-aec04cbdf7231c1b0da76172de82dfa2388a80d7.tar.gz
blackbird-op-linux-aec04cbdf7231c1b0da76172de82dfa2388a80d7.zip
tpm: TPM 2.0 FIFO Interface
Detect TPM 2.0 by sending idempotent TPM 2.x command. Ordinals for TPM 2.0 are higher than TPM 1.x commands so this should be fail-safe. Using STS3 is unreliable because some chips just report 0xff and not what the spec says. Before TPM family is detected, timeouts are set to the maximum values for both TPM 1.x and TPM 2.x. In addition to this, suspend/resume functionality is implemented for TPM 2.x. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Will Arthur <will.c.arthur@intel.com> Reviewed-by: Jasob Gunthorpe <jason.gunthorpe@obsidianresearch.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Tested-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
-rw-r--r--drivers/char/tpm/tpm_tis.c112
1 files changed, 89 insertions, 23 deletions
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 239cf0bbc1a1..20a61bc98db8 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2005, 2006 IBM Corporation
+ * Copyright (C) 2014 Intel Corporation
*
* Authors:
* Leendert van Doorn <leendert@watson.ibm.com>
@@ -64,12 +65,22 @@ enum tis_defaults {
TIS_LONG_TIMEOUT = 2000, /* 2 sec */
};
+
+/* Some timeout values are needed before it is known whether the chip is
+ * TPM 1.0 or TPM 2.0.
+ */
+#define TIS_TIMEOUT_A_MAX max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_A)
+#define TIS_TIMEOUT_B_MAX max(TIS_LONG_TIMEOUT, TPM2_TIMEOUT_B)
+#define TIS_TIMEOUT_C_MAX max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_C)
+#define TIS_TIMEOUT_D_MAX max(TIS_SHORT_TIMEOUT, TPM2_TIMEOUT_D)
+
#define TPM_ACCESS(l) (0x0000 | ((l) << 12))
#define TPM_INT_ENABLE(l) (0x0008 | ((l) << 12))
#define TPM_INT_VECTOR(l) (0x000C | ((l) << 12))
#define TPM_INT_STATUS(l) (0x0010 | ((l) << 12))
#define TPM_INTF_CAPS(l) (0x0014 | ((l) << 12))
#define TPM_STS(l) (0x0018 | ((l) << 12))
+#define TPM_STS3(l) (0x001b | ((l) << 12))
#define TPM_DATA_FIFO(l) (0x0024 | ((l) << 12))
#define TPM_DID_VID(l) (0x0F00 | ((l) << 12))
@@ -363,6 +374,7 @@ static int tpm_tis_send_main(struct tpm_chip *chip, u8 *buf, size_t len)
{
int rc;
u32 ordinal;
+ unsigned long dur;
rc = tpm_tis_send_data(chip, buf, len);
if (rc < 0)
@@ -374,9 +386,14 @@ static int tpm_tis_send_main(struct tpm_chip *chip, u8 *buf, size_t len)
if (chip->vendor.irq) {
ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
+
+ if (chip->flags & TPM_CHIP_FLAG_TPM2)
+ dur = tpm2_calc_ordinal_duration(chip, ordinal);
+ else
+ dur = tpm_calc_ordinal_duration(chip, ordinal);
+
if (wait_for_tpm_stat
- (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID,
- tpm_calc_ordinal_duration(chip, ordinal),
+ (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID, dur,
&chip->vendor.read_queue, false) < 0) {
rc = -ETIME;
goto out_err;
@@ -598,17 +615,19 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
return PTR_ERR(chip);
chip->vendor.priv = priv;
+#ifdef CONFIG_ACPI
chip->acpi_dev_handle = acpi_dev_handle;
+#endif
chip->vendor.iobase = devm_ioremap(dev, start, len);
if (!chip->vendor.iobase)
return -EIO;
- /* Default timeouts */
- chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
- chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
- chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
- chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+ /* Maximum timeouts */
+ chip->vendor.timeout_a = TIS_TIMEOUT_A_MAX;
+ chip->vendor.timeout_b = TIS_TIMEOUT_B_MAX;
+ chip->vendor.timeout_c = TIS_TIMEOUT_C_MAX;
+ chip->vendor.timeout_d = TIS_TIMEOUT_D_MAX;
if (wait_startup(chip, 0) != 0) {
rc = -ENODEV;
@@ -620,11 +639,18 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
goto out_err;
}
+ /* Every TPM 2.x command has a higher ordinal than TPM 1.x commands.
+ * Therefore, we can use an idempotent TPM 2.x command to probe TPM 2.x.
+ */
+ rc = tpm2_gen_interrupt(chip, true);
+ if (rc == 0 || rc == TPM2_RC_INITIALIZE)
+ chip->flags |= TPM_CHIP_FLAG_TPM2;
+
vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
chip->vendor.manufacturer_id = vendor;
- dev_info(dev,
- "1.2 TPM (device-id 0x%X, rev-id %d)\n",
+ dev_info(dev, "%s TPM (device-id 0x%X, rev-id %d)\n",
+ (chip->flags & TPM_CHIP_FLAG_TPM2) ? "2.0" : "1.2",
vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
if (!itpm) {
@@ -720,7 +746,10 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
chip->vendor.probed_irq = 0;
/* Generate Interrupts */
- tpm_gen_interrupt(chip);
+ if (chip->flags & TPM_CHIP_FLAG_TPM2)
+ tpm2_gen_interrupt(chip, false);
+ else
+ tpm_gen_interrupt(chip);
chip->vendor.irq = chip->vendor.probed_irq;
@@ -765,16 +794,44 @@ static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
}
}
- if (tpm_get_timeouts(chip)) {
- dev_err(dev, "Could not get TPM timeouts and durations\n");
- rc = -ENODEV;
- goto out_err;
- }
+ if (chip->flags & TPM_CHIP_FLAG_TPM2) {
+ chip->vendor.timeout_a = msecs_to_jiffies(TPM2_TIMEOUT_A);
+ chip->vendor.timeout_b = msecs_to_jiffies(TPM2_TIMEOUT_B);
+ chip->vendor.timeout_c = msecs_to_jiffies(TPM2_TIMEOUT_C);
+ chip->vendor.timeout_d = msecs_to_jiffies(TPM2_TIMEOUT_D);
+ chip->vendor.duration[TPM_SHORT] =
+ msecs_to_jiffies(TPM2_DURATION_SHORT);
+ chip->vendor.duration[TPM_MEDIUM] =
+ msecs_to_jiffies(TPM2_DURATION_MEDIUM);
+ chip->vendor.duration[TPM_LONG] =
+ msecs_to_jiffies(TPM2_DURATION_LONG);
+
+ rc = tpm2_do_selftest(chip);
+ if (rc == TPM2_RC_INITIALIZE) {
+ dev_warn(dev, "Firmware has not started TPM\n");
+ rc = tpm2_startup(chip, TPM2_SU_CLEAR);
+ if (!rc)
+ rc = tpm2_do_selftest(chip);
+ }
- if (tpm_do_selftest(chip)) {
- dev_err(dev, "TPM self test failed\n");
- rc = -ENODEV;
- goto out_err;
+ if (rc) {
+ dev_err(dev, "TPM self test failed\n");
+ if (rc > 0)
+ rc = -ENODEV;
+ goto out_err;
+ }
+ } else {
+ if (tpm_get_timeouts(chip)) {
+ dev_err(dev, "Could not get TPM timeouts and durations\n");
+ rc = -ENODEV;
+ goto out_err;
+ }
+
+ if (tpm_do_selftest(chip)) {
+ dev_err(dev, "TPM self test failed\n");
+ rc = -ENODEV;
+ goto out_err;
+ }
}
return tpm_chip_register(chip);
@@ -808,14 +865,23 @@ static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
static int tpm_tis_resume(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
- int ret;
+ int ret = 0;
if (chip->vendor.irq)
tpm_tis_reenable_interrupts(chip);
- ret = tpm_pm_resume(dev);
- if (!ret)
- tpm_do_selftest(chip);
+ if (chip->flags & TPM_CHIP_FLAG_TPM2) {
+ /* NOP if firmware properly does this. */
+ tpm2_startup(chip, TPM2_SU_STATE);
+
+ ret = tpm2_shutdown(chip, TPM2_SU_STATE);
+ if (!ret)
+ ret = tpm2_do_selftest(chip);
+ } else {
+ ret = tpm_pm_resume(dev);
+ if (!ret)
+ tpm_do_selftest(chip);
+ }
return ret;
}
OpenPOWER on IntegriCloud