summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorGuenter Roeck <linux@roeck-us.net>2012-02-24 03:40:53 -0800
committerGuenter Roeck <guenter.roeck@ericsson.com>2012-03-18 18:27:52 -0700
commit927112696654f4c96a85aa8a494866cbc6ccfbe6 (patch)
tree0c27c60740018af7640627663b3f0f19339ae3b2
parent590defe59ef9596dcd892d2d8395d730c510323d (diff)
downloadblackbird-op-linux-927112696654f4c96a85aa8a494866cbc6ccfbe6.tar.gz
blackbird-op-linux-927112696654f4c96a85aa8a494866cbc6ccfbe6.zip
hwmon: (adm1275) Add support for ADM1075
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-rw-r--r--Documentation/hwmon/adm127530
-rw-r--r--drivers/hwmon/pmbus/Kconfig4
-rw-r--r--drivers/hwmon/pmbus/adm1275.c88
3 files changed, 109 insertions, 13 deletions
diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275
index ab70d96d2dfd..535ad23ea704 100644
--- a/Documentation/hwmon/adm1275
+++ b/Documentation/hwmon/adm1275
@@ -2,6 +2,10 @@ Kernel driver adm1275
=====================
Supported chips:
+ * Analog Devices ADM1075
+ Prefix: 'adm1075'
+ Addresses scanned: -
+ Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf
* Analog Devices ADM1275
Prefix: 'adm1275'
Addresses scanned: -
@@ -17,13 +21,13 @@ Author: Guenter Roeck <guenter.roeck@ericsson.com>
Description
-----------
-This driver supports hardware montoring for Analog Devices ADM1275 and ADM1276
-Hot-Swap Controller and Digital Power Monitor.
+This driver supports hardware montoring for Analog Devices ADM1075, ADM1275,
+and ADM1276 Hot-Swap Controller and Digital Power Monitor.
-ADM1275 and ADM1276 are hot-swap controllers that allow a circuit board to be
-removed from or inserted into a live backplane. They also feature current and
-voltage readback via an integrated 12-bit analog-to-digital converter (ADC),
-accessed using a PMBus interface.
+ADM1075, ADM1275, and ADM1276 are hot-swap controllers that allow a circuit
+board to be removed from or inserted into a live backplane. They also feature
+current and voltage readback via an integrated 12-bit analog-to-digital
+converter (ADC), accessed using a PMBus interface.
The driver is a client driver to the core PMBus driver. Please see
Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -36,6 +40,10 @@ This driver does not auto-detect devices. You will have to instantiate the
devices explicitly. Please see Documentation/i2c/instantiating-devices for
details.
+The ADM1075, unlike many other PMBus devices, does not support internal voltage
+or current scaling. Reported voltages, currents, and power are raw measurements,
+and will typically have to be scaled.
+
Platform data support
---------------------
@@ -51,7 +59,8 @@ The following attributes are supported. Limits are read-write, history reset
attributes are write-only, all other attributes are read-only.
in1_label "vin1" or "vout1" depending on chip variant and
- configuration.
+ configuration. On ADM1075, vout1 reports the voltage on
+ the VAUX pin.
in1_input Measured voltage.
in1_min Minumum Voltage.
in1_max Maximum voltage.
@@ -74,3 +83,10 @@ curr1_crit Critical maximum current. Depending on the chip
curr1_crit_alarm Critical current high alarm.
curr1_highest Historical maximum current.
curr1_reset_history Write any value to reset history.
+
+power1_label "pin1"
+power1_input Input power.
+power1_reset_history Write any value to reset history.
+
+ Power attributes are supported on ADM1075 and ADM1276
+ only.
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 1f0d0110b6b8..9246d0154f74 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -31,8 +31,8 @@ config SENSORS_ADM1275
default n
help
If you say yes here you get hardware monitoring support for Analog
- Devices ADM1275 and ADM1276 Hot-Swap Controller and Digital Power
- Monitor.
+ Devices ADM1075, ADM1275, and ADM1276 Hot-Swap Controller and Digital
+ Power Monitors.
This driver can also be built as a module. If so, the module will
be called adm1275.
diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index 5e4421e57eb0..60aad9570f01 100644
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -23,7 +23,7 @@
#include <linux/i2c.h>
#include "pmbus.h"
-enum chips { adm1275, adm1276 };
+enum chips { adm1075, adm1275, adm1276 };
#define ADM1275_PEAK_IOUT 0xd0
#define ADM1275_PEAK_VIN 0xd1
@@ -32,6 +32,9 @@ enum chips { adm1275, adm1276 };
#define ADM1275_VIN_VOUT_SELECT (1 << 6)
#define ADM1275_VRANGE (1 << 5)
+#define ADM1075_IRANGE_50 (1 << 4)
+#define ADM1075_IRANGE_25 (1 << 3)
+#define ADM1075_IRANGE_MASK ((1 << 3) | (1 << 4))
#define ADM1275_IOUT_WARN2_LIMIT 0xd7
#define ADM1275_DEVICE_CONFIG 0xd8
@@ -42,6 +45,14 @@ enum chips { adm1275, adm1276 };
#define ADM1275_MFR_STATUS_IOUT_WARN2 (1 << 0)
+#define ADM1075_READ_VAUX 0xdd
+#define ADM1075_VAUX_OV_WARN_LIMIT 0xde
+#define ADM1075_VAUX_UV_WARN_LIMIT 0xdf
+#define ADM1075_VAUX_STATUS 0xf6
+
+#define ADM1075_VAUX_OV_WARN (1<<7)
+#define ADM1075_VAUX_UV_WARN (1<<6)
+
struct adm1275_data {
int id;
bool have_oc_fault;
@@ -74,6 +85,29 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
}
ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT);
break;
+ case PMBUS_VOUT_OV_WARN_LIMIT:
+ if (data->id != adm1075) {
+ ret = -ENODATA;
+ break;
+ }
+ ret = pmbus_read_word_data(client, 0,
+ ADM1075_VAUX_OV_WARN_LIMIT);
+ break;
+ case PMBUS_VOUT_UV_WARN_LIMIT:
+ if (data->id != adm1075) {
+ ret = -ENODATA;
+ break;
+ }
+ ret = pmbus_read_word_data(client, 0,
+ ADM1075_VAUX_UV_WARN_LIMIT);
+ break;
+ case PMBUS_READ_VOUT:
+ if (data->id != adm1075) {
+ ret = -ENODATA;
+ break;
+ }
+ ret = pmbus_read_word_data(client, 0, ADM1075_READ_VAUX);
+ break;
case PMBUS_VIRT_READ_IOUT_MAX:
ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_IOUT);
break;
@@ -84,7 +118,7 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VIN);
break;
case PMBUS_VIRT_READ_PIN_MAX:
- if (data->id != adm1276) {
+ if (data->id == adm1275) {
ret = -ENXIO;
break;
}
@@ -95,7 +129,7 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
case PMBUS_VIRT_RESET_VIN_HISTORY:
break;
case PMBUS_VIRT_RESET_PIN_HISTORY:
- if (data->id != adm1276)
+ if (data->id == adm1275)
ret = -ENXIO;
break;
default:
@@ -163,6 +197,19 @@ static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg)
PB_IOUT_OC_FAULT : PB_IOUT_UC_FAULT;
}
break;
+ case PMBUS_STATUS_VOUT:
+ if (data->id != adm1075) {
+ ret = -ENODATA;
+ break;
+ }
+ ret = 0;
+ mfr_status = pmbus_read_byte_data(client, 0,
+ ADM1075_VAUX_STATUS);
+ if (mfr_status & ADM1075_VAUX_OV_WARN)
+ ret |= PB_VOLTAGE_OV_WARNING;
+ if (mfr_status & ADM1075_VAUX_UV_WARN)
+ ret |= PB_VOLTAGE_UV_WARNING;
+ break;
default:
ret = -ENODATA;
break;
@@ -171,6 +218,7 @@ static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg)
}
static const struct i2c_device_id adm1275_id[] = {
+ { "adm1075", adm1075 },
{ "adm1275", adm1275 },
{ "adm1276", adm1276 },
{ }
@@ -251,7 +299,14 @@ static int adm1275_probe(struct i2c_client *client,
info->read_byte_data = adm1275_read_byte_data;
info->write_word_data = adm1275_write_word_data;
- if (config & ADM1275_VRANGE) {
+ if (data->id == adm1075) {
+ info->m[PSC_VOLTAGE_IN] = 27169;
+ info->b[PSC_VOLTAGE_IN] = 0;
+ info->R[PSC_VOLTAGE_IN] = -1;
+ info->m[PSC_VOLTAGE_OUT] = 27169;
+ info->b[PSC_VOLTAGE_OUT] = 0;
+ info->R[PSC_VOLTAGE_OUT] = -1;
+ } else if (config & ADM1275_VRANGE) {
info->m[PSC_VOLTAGE_IN] = 19199;
info->b[PSC_VOLTAGE_IN] = 0;
info->R[PSC_VOLTAGE_IN] = -2;
@@ -271,6 +326,31 @@ static int adm1275_probe(struct i2c_client *client,
data->have_oc_fault = true;
switch (data->id) {
+ case adm1075:
+ info->format[PSC_POWER] = direct;
+ info->b[PSC_POWER] = 0;
+ info->R[PSC_POWER] = -1;
+ switch (config & ADM1075_IRANGE_MASK) {
+ case ADM1075_IRANGE_25:
+ info->m[PSC_POWER] = 8549;
+ info->m[PSC_CURRENT_OUT] = 806;
+ break;
+ case ADM1075_IRANGE_50:
+ info->m[PSC_POWER] = 4279;
+ info->m[PSC_CURRENT_OUT] = 404;
+ break;
+ default:
+ dev_err(&client->dev, "Invalid input current range");
+ info->m[PSC_POWER] = 0;
+ info->m[PSC_CURRENT_OUT] = 0;
+ break;
+ }
+ info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN
+ | PMBUS_HAVE_STATUS_INPUT;
+ if (config & ADM1275_VIN_VOUT_SELECT)
+ info->func[0] |=
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ break;
case adm1275:
if (config & ADM1275_VIN_VOUT_SELECT)
info->func[0] |=
OpenPOWER on IntegriCloud