summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorBryan O'Sullivan <bos@pathscale.com>2006-09-28 09:00:18 -0700
committerRoland Dreier <rolandd@cisco.com>2006-09-28 11:17:03 -0700
commit89d1e09b6a6d844ef327937f41658a426be42501 (patch)
tree5730241c737baf67b0b1ddf89ff38f6936d649c4
parent510847750c9d26052a71631e0fcad9e7f7a5f369 (diff)
downloadblackbird-op-linux-89d1e09b6a6d844ef327937f41658a426be42501.tar.gz
blackbird-op-linux-89d1e09b6a6d844ef327937f41658a426be42501.zip
IB/ipath: Fix and recover TXE piobuf and PBC parity errors
We can sometimes trigger parity errors due to processor speculative reads to our write-combined memory (mostly seen on Woodcrest). Add a stats counter for these. Factored out the sendbuffererror buffer cancellation code so it can be used in the new handling; suppress likely subsequent error messages if within two jiffies of the cancellation. Also restore 2 dropped TXE lines on hwe_bitsextant noticed while debugging. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-rw-r--r--drivers/infiniband/hw/ipath/ipath_common.h3
-rw-r--r--drivers/infiniband/hw/ipath/ipath_iba6110.c32
-rw-r--r--drivers/infiniband/hw/ipath/ipath_iba6120.c37
-rw-r--r--drivers/infiniband/hw/ipath/ipath_intr.c98
-rw-r--r--drivers/infiniband/hw/ipath/ipath_kernel.h6
5 files changed, 124 insertions, 52 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 382956d2ea4b..a9b109a353bc 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -141,8 +141,9 @@ struct infinipath_stats {
* packets if ipath not configured, etc.)
*/
__u64 sps_krdrops;
+ __u64 sps_txeparity; /* PIO buffer parity error, recovered */
/* pad for future growth */
- __u64 __sps_pad[46];
+ __u64 __sps_pad[45];
};
/*
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c
index fd49c9c32c68..9e4e8d4c6e20 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6110.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c
@@ -451,7 +451,10 @@ static void ipath_ht_handle_hwerrors(struct ipath_devdata *dd, char *msg,
* make sure we get this much out, unless told to be quiet,
* or it's occurred within the last 5 seconds
*/
- if ((hwerrs & ~dd->ipath_lasthwerror) ||
+ if ((hwerrs & ~(dd->ipath_lasthwerror |
+ ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
+ INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
+ << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT))) ||
(ipath_debug & __IPATH_VERBDBG))
dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx "
"(cleared)\n", (unsigned long long) hwerrs);
@@ -464,6 +467,33 @@ static void ipath_ht_handle_hwerrors(struct ipath_devdata *dd, char *msg,
ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
if (ctrl & INFINIPATH_C_FREEZEMODE) {
+ /*
+ * parity errors in send memory are recoverable,
+ * just cancel the send (if indicated in * sendbuffererror),
+ * count the occurrence, unfreeze (if no other handled
+ * hardware error bits are set), and continue. They can
+ * occur if a processor speculative read is done to the PIO
+ * buffer while we are sending a packet, for example.
+ */
+ if (hwerrs & ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
+ INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
+ << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)) {
+ ipath_stats.sps_txeparity++;
+ ipath_dbg("Recovering from TXE parity error (%llu), "
+ "hwerrstatus=%llx\n",
+ (unsigned long long) ipath_stats.sps_txeparity,
+ (unsigned long long) hwerrs);
+ ipath_disarm_senderrbufs(dd);
+ hwerrs &= ~((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
+ INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
+ << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT);
+ if (!hwerrs) { /* else leave in freeze mode */
+ ipath_write_kreg(dd,
+ dd->ipath_kregs->kr_control,
+ dd->ipath_control);
+ return;
+ }
+ }
if (hwerrs) {
/*
* if any set that we aren't ignoring; only
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
index 08a44dd9ed6f..024b6aa320f1 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c
@@ -370,7 +370,10 @@ static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg,
* make sure we get this much out, unless told to be quiet,
* or it's occurred within the last 5 seconds
*/
- if ((hwerrs & ~dd->ipath_lasthwerror) ||
+ if ((hwerrs & ~(dd->ipath_lasthwerror |
+ ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
+ INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
+ << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT))) ||
(ipath_debug & __IPATH_VERBDBG))
dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx "
"(cleared)\n", (unsigned long long) hwerrs);
@@ -383,6 +386,33 @@ static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg,
ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
if (ctrl & INFINIPATH_C_FREEZEMODE) {
+ /*
+ * parity errors in send memory are recoverable,
+ * just cancel the send (if indicated in * sendbuffererror),
+ * count the occurrence, unfreeze (if no other handled
+ * hardware error bits are set), and continue. They can
+ * occur if a processor speculative read is done to the PIO
+ * buffer while we are sending a packet, for example.
+ */
+ if (hwerrs & ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
+ INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
+ << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)) {
+ ipath_stats.sps_txeparity++;
+ ipath_dbg("Recovering from TXE parity error (%llu), "
+ "hwerrstatus=%llx\n",
+ (unsigned long long) ipath_stats.sps_txeparity,
+ (unsigned long long) hwerrs);
+ ipath_disarm_senderrbufs(dd);
+ hwerrs &= ~((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
+ INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
+ << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT);
+ if (!hwerrs) { /* else leave in freeze mode */
+ ipath_write_kreg(dd,
+ dd->ipath_kregs->kr_control,
+ dd->ipath_control);
+ return;
+ }
+ }
if (hwerrs) {
/*
* if any set that we aren't ignoring only make the
@@ -406,9 +436,8 @@ static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg,
} else {
ipath_dbg("Clearing freezemode on ignored hardware "
"error\n");
- ctrl &= ~INFINIPATH_C_FREEZEMODE;
ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- ctrl);
+ dd->ipath_control);
}
}
@@ -880,6 +909,8 @@ static void ipath_init_pe_variables(struct ipath_devdata *dd)
dd->ipath_hwe_bitsextant =
(INFINIPATH_HWE_RXEMEMPARITYERR_MASK <<
INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) |
+ (INFINIPATH_HWE_TXEMEMPARITYERR_MASK <<
+ INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) |
(INFINIPATH_HWE_PCIEMEMPARITYERR_MASK <<
INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT) |
INFINIPATH_HWE_PCIE1PLLFAILED |
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index f4d8aafc6306..6bee53ce5f33 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -37,6 +37,50 @@
#include "ipath_verbs.h"
#include "ipath_common.h"
+/*
+ * Called when we might have an error that is specific to a particular
+ * PIO buffer, and may need to cancel that buffer, so it can be re-used.
+ */
+void ipath_disarm_senderrbufs(struct ipath_devdata *dd)
+{
+ u32 piobcnt;
+ unsigned long sbuf[4];
+ /*
+ * it's possible that sendbuffererror could have bits set; might
+ * have already done this as a result of hardware error handling
+ */
+ piobcnt = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
+ /* read these before writing errorclear */
+ sbuf[0] = ipath_read_kreg64(
+ dd, dd->ipath_kregs->kr_sendbuffererror);
+ sbuf[1] = ipath_read_kreg64(
+ dd, dd->ipath_kregs->kr_sendbuffererror + 1);
+ if (piobcnt > 128) {
+ sbuf[2] = ipath_read_kreg64(
+ dd, dd->ipath_kregs->kr_sendbuffererror + 2);
+ sbuf[3] = ipath_read_kreg64(
+ dd, dd->ipath_kregs->kr_sendbuffererror + 3);
+ }
+
+ if (sbuf[0] || sbuf[1] || (piobcnt > 128 && (sbuf[2] || sbuf[3]))) {
+ int i;
+ if (ipath_debug & (__IPATH_PKTDBG|__IPATH_DBG)) {
+ __IPATH_DBG_WHICH(__IPATH_PKTDBG|__IPATH_DBG,
+ "SendbufErrs %lx %lx", sbuf[0],
+ sbuf[1]);
+ if (ipath_debug & __IPATH_PKTDBG && piobcnt > 128)
+ printk(" %lx %lx ", sbuf[2], sbuf[3]);
+ printk("\n");
+ }
+
+ for (i = 0; i < piobcnt; i++)
+ if (test_bit(i, sbuf))
+ ipath_disarm_piobufs(dd, i, 1);
+ dd->ipath_lastcancel = jiffies+3; /* no armlaunch for a bit */
+ }
+}
+
+
/* These are all rcv-related errors which we want to count for stats */
#define E_SUM_PKTERRS \
(INFINIPATH_E_RHDRLEN | INFINIPATH_E_RBADTID | \
@@ -68,53 +112,9 @@
static u64 handle_e_sum_errs(struct ipath_devdata *dd, ipath_err_t errs)
{
- unsigned long sbuf[4];
u64 ignore_this_time = 0;
- u32 piobcnt;
-
- /* if possible that sendbuffererror could be valid */
- piobcnt = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
- /* read these before writing errorclear */
- sbuf[0] = ipath_read_kreg64(
- dd, dd->ipath_kregs->kr_sendbuffererror);
- sbuf[1] = ipath_read_kreg64(
- dd, dd->ipath_kregs->kr_sendbuffererror + 1);
- if (piobcnt > 128) {
- sbuf[2] = ipath_read_kreg64(
- dd, dd->ipath_kregs->kr_sendbuffererror + 2);
- sbuf[3] = ipath_read_kreg64(
- dd, dd->ipath_kregs->kr_sendbuffererror + 3);
- }
- if (sbuf[0] || sbuf[1] || (piobcnt > 128 && (sbuf[2] || sbuf[3]))) {
- int i;
-
- ipath_cdbg(PKT, "SendbufErrs %lx %lx ", sbuf[0], sbuf[1]);
- if (ipath_debug & __IPATH_PKTDBG && piobcnt > 128)
- printk("%lx %lx ", sbuf[2], sbuf[3]);
- for (i = 0; i < piobcnt; i++) {
- if (test_bit(i, sbuf)) {
- u32 __iomem *piobuf;
- if (i < dd->ipath_piobcnt2k)
- piobuf = (u32 __iomem *)
- (dd->ipath_pio2kbase +
- i * dd->ipath_palign);
- else
- piobuf = (u32 __iomem *)
- (dd->ipath_pio4kbase +
- (i - dd->ipath_piobcnt2k) *
- dd->ipath_4kalign);
-
- ipath_cdbg(PKT,
- "PIObuf[%u] @%p pbc is %x; ",
- i, piobuf, readl(piobuf));
-
- ipath_disarm_piobufs(dd, i, 1);
- }
- }
- if (ipath_debug & __IPATH_PKTDBG)
- printk("\n");
- }
+ ipath_disarm_senderrbufs(dd);
if ((errs & E_SUM_LINK_PKTERRS) &&
!(dd->ipath_flags & IPATH_LINKACTIVE)) {
/*
@@ -554,6 +554,14 @@ static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
~(INFINIPATH_E_HARDWARE |
INFINIPATH_E_IBSTATUSCHANGED);
}
+
+ /* likely due to cancel, so suppress */
+ if ((errs & (INFINIPATH_E_SPKTLEN | INFINIPATH_E_SPIOARMLAUNCH)) &&
+ dd->ipath_lastcancel > jiffies) {
+ ipath_dbg("Suppressed armlaunch/spktlen after error send cancel\n");
+ errs &= ~(INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SPKTLEN);
+ }
+
if (!errs)
return 0;
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 02134cb3e944..d7540b71b451 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -427,6 +427,9 @@ struct ipath_devdata {
unsigned long ipath_rcvctrl;
/* shadow kr_sendctrl */
unsigned long ipath_sendctrl;
+ /* ports waiting for PIOavail intr */
+ unsigned long ipath_portpiowait;
+ unsigned long ipath_lastcancel; /* to not count armlaunch after cancel */
/* value we put in kr_rcvhdrcnt */
u32 ipath_rcvhdrcnt;
@@ -490,8 +493,6 @@ struct ipath_devdata {
u32 ipath_htwidth;
/* HT speed (200,400,800,1000) from HT config */
u32 ipath_htspeed;
- /* ports waiting for PIOavail intr */
- unsigned long ipath_portpiowait;
/*
* number of sequential ibcstatus change for polling active/quiet
* (i.e., link not coming up).
@@ -585,6 +586,7 @@ int ipath_enable_wc(struct ipath_devdata *dd);
void ipath_disable_wc(struct ipath_devdata *dd);
int ipath_count_units(int *npresentp, int *nupp, u32 *maxportsp);
void ipath_shutdown_device(struct ipath_devdata *);
+void ipath_disarm_senderrbufs(struct ipath_devdata *);
struct file_operations;
int ipath_cdev_init(int minor, char *name, struct file_operations *fops,
OpenPOWER on IntegriCloud