Merge branch 'for-arm-soc' of git://git.armlinux.org.uk/~rmk/linux-arm into arm/soc

* 'for-arm-soc' of git://git.armlinux.org.uk/~rmk/linux-arm: (21 commits)
  ARM: sa1100: convert to common clock framework
  ARM: riscpc: enable chained scatterlist support
  ARM: riscpc: reduce IRQ handling code
  ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc
  ARM: riscpc: parse video information from tagged list
  ARM: riscpc: add ecard quirk for Atomwide 3port serial card
  ARM: sa1100/neponset: convert serial to use gpiod APIs
  ARM: sa1100/hackkit: remove empty serial mctrl functions
  ARM: sa1100/badge4: remove commented out modem control initialisers
  ARM: sa1100/h3xxx: convert serial to gpiod APIs
  ARM: sa1100/assabet: convert serial to gpiod APIs
  serial: sa1100: add note about modem control signals
  serial: sa1100: add support for mctrl gpios
  ARM: riscpc: dma: use __iomem pointers for writing DMA
  ARM: riscpc: dma: improve address/length writing
  ARM: riscpc: dma: make state a local variable
  ARM: riscpc: dma: eliminate "cur_sg" scatterlist usage
  ARM: riscpc: fix DMA
  ARM: riscpc: fix ecard printing
  ARM: riscpc: fix lack of keyboard interrupts after irq conversion
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

20 files changed, 366 insertions, 550 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index ba64522eed37..1f1164b76952 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1231,7 +1231,7 @@ F:	include/uapi/drm/panfrost_drm.h
 ARM MFM AND FLOPPY DRIVERS
 M:	Ian Molton <spyro@f2s.com>
 S:	Maintained
-F:	arch/arm/lib/floppydma.S
+F:	arch/arm/mach-rpc/floppydma.S
 F:	arch/arm/include/asm/floppy.h
 
 ARM PMU PROFILING AND DEBUGGING
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 02c62baa9573..1d50861ef241 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -519,7 +519,7 @@ config ARCH_RPC
 	select ARCH_ACORN
 	select ARCH_MAY_HAVE_PC_FDC
 	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_USES_GETTIMEOFFSET
+	select ARM_HAS_SG_CHAIN
 	select CPU_SA110
 	select FIQ
 	select HAVE_IDE
@@ -540,6 +540,7 @@ config ARCH_SA1100
 	select CLKSRC_MMIO
 	select CLKSRC_PXA
 	select TIMER_OF if OF
+	select COMMON_CLK
 	select CPU_FREQ
 	select CPU_SA1100
 	select GENERIC_CLOCKEVENTS
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 0bff0176db2c..b25c54585048 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -31,7 +31,6 @@ else
 endif
 
 ifeq ($(CONFIG_ARCH_RPC),y)
-  lib-y				+= ecard.o io-acorn.o floppydma.o
   AFLAGS_delay-loop.o		+= -march=armv4
 endif
 
diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile
index 056ef5460290..90a645a18444 100644
--- a/arch/arm/mach-rpc/Makefile
+++ b/arch/arm/mach-rpc/Makefile
@@ -5,4 +5,5 @@
 
 # Object file lists.
 
-obj-y			:= dma.o ecard.o fiq.o irq.o riscpc.o time.o
+obj-y	:=dma.o ecard.o ecard-loader.o fiq.o floppydma.o io-acorn.o irq.o \
+	  riscpc.o time.o
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index f2703ca17954..e221f6bb935f 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -27,10 +27,11 @@
 
 struct iomd_dma {
 	struct dma_struct	dma;
-	unsigned int		state;
-	unsigned long		base;		/* Controller base address */
+	void __iomem		*base;		/* Controller base address */
 	int			irq;		/* Controller IRQ */
-	struct scatterlist	cur_sg;		/* Current controller buffer */
+	unsigned int		state;
+	dma_addr_t		cur_addr;
+	unsigned int		cur_len;
 	dma_addr_t		dma_addr;
 	unsigned int		dma_len;
 };
@@ -53,13 +54,13 @@ typedef enum {
 #define CR	(IOMD_IO0CR - IOMD_IO0CURA)
 #define ST	(IOMD_IO0ST - IOMD_IO0CURA)
 
-static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
+static void iomd_get_next_sg(struct iomd_dma *idma)
 {
 	unsigned long end, offset, flags = 0;
 
 	if (idma->dma.sg) {
-		sg->dma_address = idma->dma_addr;
-		offset = sg->dma_address & ~PAGE_MASK;
+		idma->cur_addr = idma->dma_addr;
+		offset = idma->cur_addr & ~PAGE_MASK;
 
 		end = offset + idma->dma_len;
 
@@ -69,7 +70,7 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
 		if (offset + TRANSFER_SIZE >= end)
 			flags |= DMA_END_L;
 
-		sg->length = end - TRANSFER_SIZE;
+		idma->cur_len = end - TRANSFER_SIZE;
 
 		idma->dma_len -= end - offset;
 		idma->dma_addr += end - offset;
@@ -87,52 +88,49 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
 		}
 	} else {
 		flags = DMA_END_S | DMA_END_L;
-		sg->dma_address = 0;
-		sg->length = 0;
+		idma->cur_addr = 0;
+		idma->cur_len = 0;
 	}
 
-	sg->length |= flags;
+	idma->cur_len |= flags;
 }
 
 static irqreturn_t iomd_dma_handle(int irq, void *dev_id)
 {
 	struct iomd_dma *idma = dev_id;
-	unsigned long base = idma->base;
+	void __iomem *base = idma->base;
+	unsigned int state = idma->state;
+	unsigned int status, cur, end;
 
 	do {
-		unsigned int status;
-
-		status = iomd_readb(base + ST);
+		status = readb(base + ST);
 		if (!(status & DMA_ST_INT))
-			return IRQ_HANDLED;
-
-		if ((idma->state ^ status) & DMA_ST_AB)
-			iomd_get_next_sg(&idma->cur_sg, idma);
-
-		switch (status & (DMA_ST_OFL | DMA_ST_AB)) {
-		case DMA_ST_OFL:			/* OIA */
-		case DMA_ST_AB:				/* .IB */
-			iomd_writel(idma->cur_sg.dma_address, base + CURA);
-			iomd_writel(idma->cur_sg.length, base + ENDA);
-			idma->state = DMA_ST_AB;
-			break;
-
-		case DMA_ST_OFL | DMA_ST_AB:		/* OIB */
-		case 0:					/* .IA */
-			iomd_writel(idma->cur_sg.dma_address, base + CURB);
-			iomd_writel(idma->cur_sg.length, base + ENDB);
-			idma->state = 0;
-			break;
+			goto out;
+
+		if ((state ^ status) & DMA_ST_AB)
+			iomd_get_next_sg(idma);
+
+		// This efficiently implements state = OFL != AB ? AB : 0
+		state = ((status >> 2) ^ status) & DMA_ST_AB;
+		if (state) {
+			cur = CURA;
+			end = ENDA;
+		} else {
+			cur = CURB;
+			end = ENDB;
 		}
+		writel(idma->cur_addr, base + cur);
+		writel(idma->cur_len, base + end);
 
 		if (status & DMA_ST_OFL &&
-		    idma->cur_sg.length == (DMA_END_S|DMA_END_L))
+		    idma->cur_len == (DMA_END_S|DMA_END_L))
 			break;
 	} while (1);
 
-	idma->state = ~DMA_ST_AB;
-	disable_irq(irq);
-
+	state = ~DMA_ST_AB;
+	disable_irq_nosync(irq);
+out:
+	idma->state = state;
 	return IRQ_HANDLED;
 }
 
@@ -160,7 +158,7 @@ static struct device isa_dma_dev = {
 static void iomd_enable_dma(unsigned int chan, dma_t *dma)
 {
 	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
-	unsigned long dma_base = idma->base;
+	void __iomem *base = idma->base;
 	unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E;
 
 	if (idma->dma.invalid) {
@@ -180,27 +178,30 @@ static void iomd_enable_dma(unsigned int chan, dma_t *dma)
 				DMA_FROM_DEVICE : DMA_TO_DEVICE);
 		}
 
-		iomd_writeb(DMA_CR_C, dma_base + CR);
+		idma->dma_addr = idma->dma.sg->dma_address;
+		idma->dma_len = idma->dma.sg->length;
+
+		writeb(DMA_CR_C, base + CR);
 		idma->state = DMA_ST_AB;
 	}
 
 	if (idma->dma.dma_mode == DMA_MODE_READ)
 		ctrl |= DMA_CR_D;
 
-	iomd_writeb(ctrl, dma_base + CR);
+	writeb(ctrl, base + CR);
 	enable_irq(idma->irq);
 }
 
 static void iomd_disable_dma(unsigned int chan, dma_t *dma)
 {
 	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
-	unsigned long dma_base = idma->base;
+	void __iomem *base = idma->base;
 	unsigned long flags;
 
 	local_irq_save(flags);
 	if (idma->state != ~DMA_ST_AB)
 		disable_irq(idma->irq);
-	iomd_writeb(0, dma_base + CR);
+	writeb(0, base + CR);
 	local_irq_restore(flags);
 }
 
@@ -363,17 +364,17 @@ static int __init rpc_dma_init(void)
 	 */
 	iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT);
 
-	iomd_dma[DMA_0].base	= IOMD_IO0CURA;
+	iomd_dma[DMA_0].base	= IOMD_BASE + IOMD_IO0CURA;
 	iomd_dma[DMA_0].irq	= IRQ_DMA0;
-	iomd_dma[DMA_1].base	= IOMD_IO1CURA;
+	iomd_dma[DMA_1].base	= IOMD_BASE + IOMD_IO1CURA;
 	iomd_dma[DMA_1].irq	= IRQ_DMA1;
-	iomd_dma[DMA_2].base	= IOMD_IO2CURA;
+	iomd_dma[DMA_2].base	= IOMD_BASE + IOMD_IO2CURA;
 	iomd_dma[DMA_2].irq	= IRQ_DMA2;
-	iomd_dma[DMA_3].base	= IOMD_IO3CURA;
+	iomd_dma[DMA_3].base	= IOMD_BASE + IOMD_IO3CURA;
 	iomd_dma[DMA_3].irq	= IRQ_DMA3;
-	iomd_dma[DMA_S0].base	= IOMD_SD0CURA;
+	iomd_dma[DMA_S0].base	= IOMD_BASE + IOMD_SD0CURA;
 	iomd_dma[DMA_S0].irq	= IRQ_DMAS0;
-	iomd_dma[DMA_S1].base	= IOMD_SD1CURA;
+	iomd_dma[DMA_S1].base	= IOMD_BASE + IOMD_SD1CURA;
 	iomd_dma[DMA_S1].irq	= IRQ_DMAS1;
 
 	for (i = DMA_0; i <= DMA_S1; i++) {
diff --git a/arch/arm/lib/ecard.S b/arch/arm/mach-rpc/ecard-loader.S
index e6057fa851bb..e6057fa851bb 100644
--- a/arch/arm/lib/ecard.S
+++ b/arch/arm/mach-rpc/ecard-loader.S
diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c
index 04b2f22c2739..eec5ecd6e948 100644
--- a/arch/arm/mach-rpc/ecard.c
+++ b/arch/arm/mach-rpc/ecard.c
@@ -70,17 +70,21 @@ struct expcard_blacklist {
 	unsigned short	 manufacturer;
 	unsigned short	 product;
 	const char	*type;
+	void (*init)(ecard_t *ec);
 };
 
 static ecard_t *cards;
 static ecard_t *slot_to_expcard[MAX_ECARDS];
 static unsigned int ectcr;
 
+static void atomwide_3p_quirk(ecard_t *ec);
+
 /* List of descriptions of cards which don't have an extended
  * identification, or chunk directories containing a description.
  */
 static struct expcard_blacklist __initdata blacklist[] = {
-	{ MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" }
+	{ MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" },
+	{ MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, NULL, atomwide_3p_quirk },
 };
 
 asmlinkage extern int
@@ -496,18 +500,21 @@ static void ecard_dump_irq_state(void)
 	printk("Expansion card IRQ state:\n");
 
 	for (ec = cards; ec; ec = ec->next) {
+		const char *claimed;
+
 		if (ec->slot_no == 8)
 			continue;
 
-		printk("  %d: %sclaimed, ",
-		       ec->slot_no, ec->claimed ? "" : "not ");
+		claimed = ec->claimed ? "" : "not ";
 
 		if (ec->ops && ec->ops->irqpending &&
 		    ec->ops != &ecard_default_ops)
-			printk("irq %spending\n",
+			printk("  %d: %sclaimed irq %spending\n",
+			       ec->slot_no, claimed,
 			       ec->ops->irqpending(ec) ? "" : "not ");
 		else
-			printk("irqaddr %p, mask = %02X, status = %02X\n",
+			printk("  %d: %sclaimed irqaddr %p, mask = %02X, status = %02X\n",
+			       ec->slot_no, claimed,
 			       ec->irqaddr, ec->irqmask, readb(ec->irqaddr));
 	}
 }
@@ -868,6 +875,16 @@ void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
 }
 EXPORT_SYMBOL(ecardm_iomap);
 
+static void atomwide_3p_quirk(ecard_t *ec)
+{
+	void __iomem *addr = __ecard_address(ec, ECARD_IOC, ECARD_SYNC);
+	unsigned int i;
+
+	/* Disable interrupts on each port */
+	for (i = 0x2000; i <= 0x2800; i += 0x0400)
+		writeb(0, addr + i + 4);	
+}
+
 /*
  * Probe for an expansion card.
  *
@@ -924,7 +941,10 @@ static int __init ecard_probe(int slot, unsigned irq, card_type_t type)
 	for (i = 0; i < ARRAY_SIZE(blacklist); i++)
 		if (blacklist[i].manufacturer == ec->cid.manufacturer &&
 		    blacklist[i].product == ec->cid.product) {
-			ec->card_desc = blacklist[i].type;
+		    	if (blacklist[i].type)
+				ec->card_desc = blacklist[i].type;
+			if (blacklist[i].init)
+				blacklist[i].init(ec);
 			break;
 		}
 
diff --git a/arch/arm/lib/floppydma.S b/arch/arm/mach-rpc/floppydma.S
index de68d3b343e3..de68d3b343e3 100644
--- a/arch/arm/lib/floppydma.S
+++ b/arch/arm/mach-rpc/floppydma.S
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
index 654a6f3f2547..edc1961e8d1e 100644
--- a/arch/arm/mach-rpc/include/mach/uncompress.h
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -118,29 +118,22 @@ static void arch_decomp_setup(void)
 	struct tag *t = (struct tag *)params;
 	unsigned int nr_pages = 0, page_size = PAGE_SIZE;
 
-	if (t->hdr.tag == ATAG_CORE)
-	{
-		for (; t->hdr.size; t = tag_next(t))
-		{
-			if (t->hdr.tag == ATAG_VIDEOTEXT)
-			{
+	if (t->hdr.tag == ATAG_CORE) {
+		for (; t->hdr.size; t = tag_next(t)) {
+			if (t->hdr.tag == ATAG_VIDEOTEXT) {
 				video_num_rows = t->u.videotext.video_lines;
 				video_num_cols = t->u.videotext.video_cols;
-				bytes_per_char_h = t->u.videotext.video_points;
-				bytes_per_char_v = t->u.videotext.video_points;
 				video_x = t->u.videotext.x;
 				video_y = t->u.videotext.y;
-			}
-
-			if (t->hdr.tag == ATAG_MEM)
-			{
+			} else if (t->hdr.tag == ATAG_VIDEOLFB) {
+				bytes_per_char_h = t->u.videolfb.lfb_depth;
+				bytes_per_char_v = 8;
+			} else if (t->hdr.tag == ATAG_MEM) {
 				page_size = PAGE_SIZE;
 				nr_pages += (t->u.mem.size / PAGE_SIZE);
 			}
 		}
-	}
-	else
-	{
+	} else {
 		nr_pages = params->nr_pages;
 		page_size = params->page_size;
 		video_num_rows = params->video_num_rows;
diff --git a/arch/arm/lib/io-acorn.S b/arch/arm/mach-rpc/io-acorn.S
index 69719bad674d..69719bad674d 100644
--- a/arch/arm/lib/io-acorn.S
+++ b/arch/arm/mach-rpc/io-acorn.S
diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
index b8a61cb11207..803aeb126f0e 100644
--- a/arch/arm/mach-rpc/irq.c
+++ b/arch/arm/mach-rpc/irq.c
@@ -8,117 +8,71 @@
 #include <asm/irq.h>
 #include <asm/fiq.h>
 
-static void iomd_ack_irq_a(struct irq_data *d)
-{
-	unsigned int val, mask;
-
-	mask = 1 << d->irq;
-	val = iomd_readb(IOMD_IRQMASKA);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKA);
-	iomd_writeb(mask, IOMD_IRQCLRA);
-}
-
-static void iomd_mask_irq_a(struct irq_data *d)
-{
-	unsigned int val, mask;
+// These are offsets from the stat register for each IRQ bank
+#define STAT	0x00
+#define REQ	0x04
+#define CLR	0x04
+#define MASK	0x08
 
-	mask = 1 << d->irq;
-	val = iomd_readb(IOMD_IRQMASKA);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKA);
-}
-
-static void iomd_unmask_irq_a(struct irq_data *d)
+static void __iomem *iomd_get_base(struct irq_data *d)
 {
-	unsigned int val, mask;
+	void *cd = irq_data_get_irq_chip_data(d);
 
-	mask = 1 << d->irq;
-	val = iomd_readb(IOMD_IRQMASKA);
-	iomd_writeb(val | mask, IOMD_IRQMASKA);
+	return (void __iomem *)(unsigned long)cd;
 }
 
-static struct irq_chip iomd_a_chip = {
-	.irq_ack	= iomd_ack_irq_a,
-	.irq_mask	= iomd_mask_irq_a,
-	.irq_unmask	= iomd_unmask_irq_a,
-};
-
-static void iomd_mask_irq_b(struct irq_data *d)
+static void iomd_set_base_mask(unsigned int irq, void __iomem *base, u32 mask)
 {
-	unsigned int val, mask;
+	struct irq_data *d = irq_get_irq_data(irq);
 
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_IRQMASKB);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKB);
+	d->mask = mask;
+	irq_set_chip_data(irq, (void *)(unsigned long)base);
 }
 
-static void iomd_unmask_irq_b(struct irq_data *d)
+static void iomd_irq_mask_ack(struct irq_data *d)
 {
-	unsigned int val, mask;
+	void __iomem *base = iomd_get_base(d);
+	unsigned int val, mask = d->mask;
 
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_IRQMASKB);
-	iomd_writeb(val | mask, IOMD_IRQMASKB);
+	val = readb(base + MASK);
+	writeb(val & ~mask, base + MASK);
+	writeb(mask, base + CLR);
 }
 
-static struct irq_chip iomd_b_chip = {
-	.irq_ack	= iomd_mask_irq_b,
-	.irq_mask	= iomd_mask_irq_b,
-	.irq_unmask	= iomd_unmask_irq_b,
-};
-
-static void iomd_mask_irq_dma(struct irq_data *d)
+static void iomd_irq_mask(struct irq_data *d)
 {
-	unsigned int val, mask;
+	void __iomem *base = iomd_get_base(d);
+	unsigned int val, mask = d->mask;
 
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_DMAMASK);
-	iomd_writeb(val & ~mask, IOMD_DMAMASK);
+	val = readb(base + MASK);
+	writeb(val & ~mask, base + MASK);
 }
 
-static void iomd_unmask_irq_dma(struct irq_data *d)
+static void iomd_irq_unmask(struct irq_data *d)
 {
-	unsigned int val, mask;
+	void __iomem *base = iomd_get_base(d);
+	unsigned int val, mask = d->mask;
 
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_DMAMASK);
-	iomd_writeb(val | mask, IOMD_DMAMASK);
+	val = readb(base + MASK);
+	writeb(val | mask, base + MASK);
 }
 
-static struct irq_chip iomd_dma_chip = {
-	.irq_ack	= iomd_mask_irq_dma,
-	.irq_mask	= iomd_mask_irq_dma,
-	.irq_unmask	= iomd_unmask_irq_dma,
+static struct irq_chip iomd_chip_clr = {
+	.irq_mask_ack	= iomd_irq_mask_ack,
+	.irq_mask	= iomd_irq_mask,
+	.irq_unmask	= iomd_irq_unmask,
 };
 
-static void iomd_mask_irq_fiq(struct irq_data *d)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_FIQMASK);
-	iomd_writeb(val & ~mask, IOMD_FIQMASK);
-}
-
-static void iomd_unmask_irq_fiq(struct irq_data *d)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_FIQMASK);
-	iomd_writeb(val | mask, IOMD_FIQMASK);
-}
-
-static struct irq_chip iomd_fiq_chip = {
-	.irq_ack	= iomd_mask_irq_fiq,
-	.irq_mask	= iomd_mask_irq_fiq,
-	.irq_unmask	= iomd_unmask_irq_fiq,
+static struct irq_chip iomd_chip_noclr = {
+	.irq_mask	= iomd_irq_mask,
+	.irq_unmask	= iomd_irq_unmask,
 };
 
 extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
 
 void __init rpc_init_irq(void)
 {
-	unsigned int irq, clr, set = 0;
+	unsigned int irq, clr, set;
 
 	iomd_writeb(0, IOMD_IRQMASKA);
 	iomd_writeb(0, IOMD_IRQMASKB);
@@ -130,6 +84,7 @@ void __init rpc_init_irq(void)
 
 	for (irq = 0; irq < NR_IRQS; irq++) {
 		clr = IRQ_NOREQUEST;
+		set = 0;
 
 		if (irq <= 6 || (irq >= 9 && irq <= 15))
 			clr |= IRQ_NOPROBE;
@@ -140,30 +95,37 @@ void __init rpc_init_irq(void)
 
 		switch (irq) {
 		case 0 ... 7:
-			irq_set_chip_and_handler(irq, &iomd_a_chip,
+			irq_set_chip_and_handler(irq, &iomd_chip_clr,
 						 handle_level_irq);
 			irq_modify_status(irq, clr, set);
+			iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATA,
+					   BIT(irq));
 			break;
 
 		case 8 ... 15:
-			irq_set_chip_and_handler(irq, &iomd_b_chip,
+			irq_set_chip_and_handler(irq, &iomd_chip_noclr,
 						 handle_level_irq);
 			irq_modify_status(irq, clr, set);
+			iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATB,
+					   BIT(irq - 8));
 			break;
 
 		case 16 ... 21:
-			irq_set_chip_and_handler(irq, &iomd_dma_chip,
+			irq_set_chip_and_handler(irq, &iomd_chip_noclr,
 						 handle_level_irq);
 			irq_modify_status(irq, clr, set);
+			iomd_set_base_mask(irq, IOMD_BASE + IOMD_DMASTAT,
+					   BIT(irq - 16));
 			break;
 
 		case 64 ... 71:
-			irq_set_chip(irq, &iomd_fiq_chip);
+			irq_set_chip(irq, &iomd_chip_noclr);
 			irq_modify_status(irq, clr, set);
+			iomd_set_base_mask(irq, IOMD_BASE + IOMD_FIQSTAT,
+					   BIT(irq - 64));
 			break;
 		}
 	}
 
 	init_FIQ(FIQ_START);
 }
-
diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
index 2689771c1d38..1c84efc9db1f 100644
--- a/arch/arm/mach-rpc/time.c
+++ b/arch/arm/mach-rpc/time.c
@@ -13,7 +13,7 @@
  *   04-Dec-1997	RMK	Updated for new arch/arm/time.c
  *   13=Jun-2004	DS	Moved to arch/arm/common b/c shared w/CLPS7500
  */
-#include <linux/timex.h>
+#include <linux/clocksource.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -27,11 +27,15 @@
 #define RPC_CLOCK_FREQ 2000000
 #define RPC_LATCH DIV_ROUND_CLOSEST(RPC_CLOCK_FREQ, HZ)
 
-static u32 ioc_timer_gettimeoffset(void)
+static u32 ioc_time;
+
+static u64 ioc_timer_read(struct clocksource *cs)
 {
 	unsigned int count1, count2, status;
-	long offset;
+	unsigned long flags;
+	u32 ticks;
 
+	local_irq_save(flags);
 	ioc_writeb (0, IOC_T0LATCH);
 	barrier ();
 	count1 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
@@ -41,27 +45,34 @@ static u32 ioc_timer_gettimeoffset(void)
 	ioc_writeb (0, IOC_T0LATCH);
 	barrier ();
 	count2 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
+	ticks = ioc_time + RPC_LATCH - count2;
+	local_irq_restore(flags);
 
-	offset = count2;
 	if (count2 < count1) {
 		/*
-		 * We have not had an interrupt between reading count1
-		 * and count2.
+		 * The timer has not reloaded between reading count1 and
+		 * count2, check whether an interrupt was actually pending.
 		 */
 		if (status & (1 << 5))
-			offset -= RPC_LATCH;
+			ticks += RPC_LATCH;
 	} else if (count2 > count1) {
 		/*
-		 * We have just had another interrupt between reading
-		 * count1 and count2.
+		 * The timer has reloaded, so count2 indicates the new
+		 * count since the wrap.  The interrupt would not have
+		 * been processed, so add the missed ticks.
 		 */
-		offset -= RPC_LATCH;
+		ticks += RPC_LATCH;
 	}
 
-	offset = (RPC_LATCH - offset) * (tick_nsec / 1000);
-	return DIV_ROUND_CLOSEST(offset, RPC_LATCH) * 1000;
+	return ticks;
 }
 
+static struct clocksource ioctime_clocksource = {
+	.read = ioc_timer_read,
+	.mask = CLOCKSOURCE_MASK(32),
+	.rating = 100,
+};
+
 void __init ioctime_init(void)
 {
 	ioc_writeb(RPC_LATCH & 255, IOC_T0LTCHL);
@@ -72,6 +83,7 @@ void __init ioctime_init(void)
 static irqreturn_t
 ioc_timer_interrupt(int irq, void *dev_id)
 {
+	ioc_time += RPC_LATCH;
 	timer_tick();
 	return IRQ_HANDLED;
 }
@@ -86,7 +98,7 @@ static struct irqaction ioc_timer_irq = {
  */
 void __init ioc_timer_init(void)
 {
-	arch_gettimeoffset = ioc_timer_gettimeoffset;
+	WARN_ON(clocksource_register_hz(&ioctime_clocksource, RPC_CLOCK_FREQ));
 	ioctime_init();
 	setup_irq(IRQ_TIMER0, &ioc_timer_irq);
 }
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index d09c3f236186..bc035821a42b 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -522,6 +522,29 @@ static const struct gpio_keys_platform_data assabet_keys_pdata = {
 	.rep = 0,
 };
 
+static struct gpiod_lookup_table assabet_uart1_gpio_table = {
+	.dev_id = "sa11x0-uart.1",
+	.table = {
+		GPIO_LOOKUP("assabet", 16, "dtr", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("assabet", 17, "rts", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("assabet", 25, "dcd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("assabet", 26, "cts", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("assabet", 27, "dsr", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table assabet_uart3_gpio_table = {
+	.dev_id = "sa11x0-uart.3",
+	.table = {
+		GPIO_LOOKUP("assabet", 28, "cts", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("assabet", 29, "dsr", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("assabet", 30, "dcd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("assabet", 31, "rng", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init assabet_init(void)
 {
 	/*
@@ -568,7 +591,10 @@ static void __init assabet_init(void)
 			neponset_resources, ARRAY_SIZE(neponset_resources));
 #endif
 	} else {
+		gpiod_add_lookup_table(&assabet_uart1_gpio_table);
+		gpiod_add_lookup_table(&assabet_uart3_gpio_table);
 		gpiod_add_lookup_table(&assabet_cf_vcc_gpio_table);
+
 		sa11x0_register_fixed_regulator(0, &assabet_cf_vcc_pdata,
 					assabet_cf_vcc_consumers,
 					ARRAY_SIZE(assabet_cf_vcc_consumers),
@@ -658,74 +684,13 @@ static void assabet_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
 {
 	if (port->mapbase == _Ser1UTCR0) {
 		if (state)
-			ASSABET_BCR_clear(ASSABET_BCR_RS232EN |
-					  ASSABET_BCR_COM_RTS |
-					  ASSABET_BCR_COM_DTR);
-		else
-			ASSABET_BCR_set(ASSABET_BCR_RS232EN |
-					ASSABET_BCR_COM_RTS |
-					ASSABET_BCR_COM_DTR);
-	}
-}
-
-/*
- * Assabet uses COM_RTS and COM_DTR for both UART1 (com port)
- * and UART3 (radio module).  We only handle them for UART1 here.
- */
-static void assabet_set_mctrl(struct uart_port *port, u_int mctrl)
-{
-	if (port->mapbase == _Ser1UTCR0) {
-		u_int set = 0, clear = 0;
-
-		if (mctrl & TIOCM_RTS)
-			clear |= ASSABET_BCR_COM_RTS;
+			ASSABET_BCR_clear(ASSABET_BCR_RS232EN);
 		else
-			set |= ASSABET_BCR_COM_RTS;
-
-		if (mctrl & TIOCM_DTR)
-			clear |= ASSABET_BCR_COM_DTR;
-		else
-			set |= ASSABET_BCR_COM_DTR;
-
-		ASSABET_BCR_clear(clear);
-		ASSABET_BCR_set(set);
-	}
-}
-
-static u_int assabet_get_mctrl(struct uart_port *port)
-{
-	u_int ret = 0;
-	u_int bsr = ASSABET_BSR;
-
-	/* need 2 reads to read current value */
-	bsr = ASSABET_BSR;
-
-	if (port->mapbase == _Ser1UTCR0) {
-		if (bsr & ASSABET_BSR_COM_DCD)
-			ret |= TIOCM_CD;
-		if (bsr & ASSABET_BSR_COM_CTS)
-			ret |= TIOCM_CTS;
-		if (bsr & ASSABET_BSR_COM_DSR)
-			ret |= TIOCM_DSR;
-	} else if (port->mapbase == _Ser3UTCR0) {
-		if (bsr & ASSABET_BSR_RAD_DCD)
-			ret |= TIOCM_CD;
-		if (bsr & ASSABET_BSR_RAD_CTS)
-			ret |= TIOCM_CTS;
-		if (bsr & ASSABET_BSR_RAD_DSR)
-			ret |= TIOCM_DSR;
-		if (bsr & ASSABET_BSR_RAD_RI)
-			ret |= TIOCM_RI;
-	} else {
-		ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
+			ASSABET_BCR_set(ASSABET_BCR_RS232EN);
 	}
-
-	return ret;
 }
 
 static struct sa1100_port_fns assabet_port_fns __initdata = {
-	.set_mctrl	= assabet_set_mctrl,
-	.get_mctrl	= assabet_get_mctrl,
 	.pm		= assabet_uart_pm,
 };
 
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index 63361b6d04e9..17d28b4dab5e 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -315,8 +315,6 @@ badge4_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
 }
 
 static struct sa1100_port_fns badge4_port_fns __initdata = {
-	//.get_mctrl	= badge4_get_mctrl,
-	//.set_mctrl	= badge4_set_mctrl,
 	.pm		= badge4_uart_pm,
 };
 
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index 6199e87447ca..e8691921c69a 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -2,176 +2,144 @@
 /*
  *  linux/arch/arm/mach-sa1100/clock.c
  */
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <linux/string.h>
 #include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
 #include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
 
 #include <mach/hardware.h>
 #include <mach/generic.h>
 
-struct clkops {
-	void			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-	unsigned long		(*get_rate)(struct clk *);
+static const char * const clk_tucr_parents[] = {
+	"clk32768", "clk3686400",
 };
 
-struct clk {
-	const struct clkops	*ops;
-	unsigned int		enabled;
-};
-
-#define DEFINE_CLK(_name, _ops)				\
-struct clk clk_##_name = {				\
-		.ops	= _ops,				\
-	}
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-/* Dummy clk routine to build generic kernel parts that may be using them */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk_get_rate(clk);
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
+static DEFINE_SPINLOCK(tucr_lock);
 
-struct clk *clk_get_parent(struct clk *clk)
+static int clk_gpio27_enable(struct clk_hw *hw)
 {
-	return NULL;
-}
-EXPORT_SYMBOL(clk_get_parent);
+	unsigned long flags;
 
-static void clk_gpio27_enable(struct clk *clk)
-{
 	/*
 	 * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
 	 * (SA-1110 Developer's Manual, section 9.1.2.1)
 	 */
+	local_irq_save(flags);
 	GAFR |= GPIO_32_768kHz;
 	GPDR |= GPIO_32_768kHz;
-	TUCR = TUCR_3_6864MHz;
+	local_irq_restore(flags);
+
+	return 0;
 }
 
-static void clk_gpio27_disable(struct clk *clk)
+static void clk_gpio27_disable(struct clk_hw *hw)
 {
-	TUCR = 0;
+	unsigned long flags;
+
+	local_irq_save(flags);
 	GPDR &= ~GPIO_32_768kHz;
 	GAFR &= ~GPIO_32_768kHz;
+	local_irq_restore(flags);
 }
 
-static void clk_cpu_enable(struct clk *clk)
-{
-}
+static const struct clk_ops clk_gpio27_ops = {
+	.enable = clk_gpio27_enable,
+	.disable = clk_gpio27_disable,
+};
 
-static void clk_cpu_disable(struct clk *clk)
-{
-}
+static const char * const clk_gpio27_parents[] = {
+	"tucr-mux",
+};
 
-static unsigned long clk_cpu_get_rate(struct clk *clk)
+static const struct clk_init_data clk_gpio27_init_data __initconst = {
+	.name = "gpio27",
+	.ops = &clk_gpio27_ops,
+	.parent_names = clk_gpio27_parents,
+	.num_parents = ARRAY_SIZE(clk_gpio27_parents),
+};
+
+/*
+ * Derived from the table 8-1 in the SA1110 manual, the MPLL appears to
+ * multiply its input rate by 4 x (4 + PPCR).  This calculation gives
+ * the exact rate.  The figures given in the table are the rates rounded
+ * to 100kHz.  Stick with sa11x0_getspeed() for the time being.
+ */
+static unsigned long clk_mpll_recalc_rate(struct clk_hw *hw,
+	unsigned long prate)
 {
 	return sa11x0_getspeed(0) * 1000;
 }
 
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (clk) {
-		spin_lock_irqsave(&clocks_lock, flags);
-		if (clk->enabled++ == 0)
-			clk->ops->enable(clk);
-		spin_unlock_irqrestore(&clocks_lock, flags);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
+static const struct clk_ops clk_mpll_ops = {
+	.recalc_rate = clk_mpll_recalc_rate,
+};
 
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
+static const char * const clk_mpll_parents[] = {
+	"clk3686400",
+};
 
-	if (clk) {
-		WARN_ON(clk->enabled == 0);
-		spin_lock_irqsave(&clocks_lock, flags);
-		if (--clk->enabled == 0)
-			clk->ops->disable(clk);
-		spin_unlock_irqrestore(&clocks_lock, flags);
-	}
-}
-EXPORT_SYMBOL(clk_disable);
+static const struct clk_init_data clk_mpll_init_data __initconst = {
+	.name = "mpll",
+	.ops = &clk_mpll_ops,
+	.parent_names = clk_mpll_parents,
+	.num_parents = ARRAY_SIZE(clk_mpll_parents),
+	.flags = CLK_GET_RATE_NOCACHE | CLK_IS_CRITICAL,
+};
 
-unsigned long clk_get_rate(struct clk *clk)
+int __init sa11xx_clk_init(void)
 {
-	if (clk && clk->ops && clk->ops->get_rate)
-		return clk->ops->get_rate(clk);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_get_rate);
+	struct clk_hw *hw;
+	int ret;
 
-const struct clkops clk_gpio27_ops = {
-	.enable		= clk_gpio27_enable,
-	.disable	= clk_gpio27_disable,
-};
+	hw = clk_hw_register_fixed_rate(NULL, "clk32768", NULL, 0, 32768);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
 
-const struct clkops clk_cpu_ops = {
-	.enable		= clk_cpu_enable,
-	.disable	= clk_cpu_disable,
-	.get_rate	= clk_cpu_get_rate,
-};
+	clk_hw_register_clkdev(hw, NULL, "sa1100-rtc");
 
-static DEFINE_CLK(gpio27, &clk_gpio27_ops);
+	hw = clk_hw_register_fixed_rate(NULL, "clk3686400", NULL, 0, 3686400);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
 
-static DEFINE_CLK(cpu, &clk_cpu_ops);
+	clk_hw_register_clkdev(hw, "OSTIMER0", NULL);
 
-static unsigned long clk_36864_get_rate(struct clk *clk)
-{
-	return 3686400;
-}
+	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
+	if (!hw)
+		return -ENOMEM;
+	hw->init = &clk_mpll_init_data;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(hw);
+		return ret;
+	}
 
-static struct clkops clk_36864_ops = {
-	.enable		= clk_cpu_enable,
-	.disable	= clk_cpu_disable,
-	.get_rate	= clk_36864_get_rate,
-};
+	clk_hw_register_clkdev(hw, NULL, "sa11x0-fb");
+	clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia");
+	clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.0");
+	clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.1");
+	clk_hw_register_clkdev(hw, NULL, "1800");
+
+	hw = clk_hw_register_mux(NULL, "tucr-mux", clk_tucr_parents,
+				 ARRAY_SIZE(clk_tucr_parents), 0,
+				 (void __iomem *)&TUCR, FShft(TUCR_TSEL),
+				 FAlnMsk(TUCR_TSEL), 0, &tucr_lock);
+	clk_set_rate(hw->clk, 3686400);
+
+	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
+	if (!hw)
+		return -ENOMEM;
+	hw->init = &clk_gpio27_init_data;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(hw);
+		return ret;
+	}
 
-static DEFINE_CLK(36864, &clk_36864_ops);
-
-static struct clk_lookup sa11xx_clkregs[] = {
-	CLKDEV_INIT("sa1111.0", NULL, &clk_gpio27),
-	CLKDEV_INIT("sa1100-rtc", NULL, NULL),
-	CLKDEV_INIT("sa11x0-fb", NULL, &clk_cpu),
-	CLKDEV_INIT("sa11x0-pcmcia", NULL, &clk_cpu),
-	CLKDEV_INIT("sa11x0-pcmcia.0", NULL, &clk_cpu),
-	CLKDEV_INIT("sa11x0-pcmcia.1", NULL, &clk_cpu),
-	/* sa1111 names devices using internal offsets, PCMCIA is at 0x1800 */
-	CLKDEV_INIT("1800", NULL, &clk_cpu),
-	CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864),
-};
+	clk_hw_register_clkdev(hw, NULL, "sa1111.0");
 
-int __init sa11xx_clk_init(void)
-{
-	clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
 	return 0;
 }
diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c
index 36a78b0c106f..e7362292612a 100644
--- a/arch/arm/mach-sa1100/h3xxx.c
+++ b/arch/arm/mach-sa1100/h3xxx.c
@@ -87,57 +87,6 @@ static struct resource h3xxx_flash_resource =
 /*
  * H3xxx uart support
  */
-static struct gpio h3xxx_uart_gpio[] = {
-	{ H3XXX_GPIO_COM_DCD,	GPIOF_IN,		"COM DCD" },
-	{ H3XXX_GPIO_COM_CTS,	GPIOF_IN,		"COM CTS" },
-	{ H3XXX_GPIO_COM_RTS,	GPIOF_OUT_INIT_LOW,	"COM RTS" },
-};
-
-static bool h3xxx_uart_request_gpios(void)
-{
-	static bool h3xxx_uart_gpio_ok;
-	int rc;
-
-	if (h3xxx_uart_gpio_ok)
-		return true;
-
-	rc = gpio_request_array(h3xxx_uart_gpio, ARRAY_SIZE(h3xxx_uart_gpio));
-	if (rc)
-		pr_err("h3xxx_uart_request_gpios: error %d\n", rc);
-	else
-		h3xxx_uart_gpio_ok = true;
-
-	return h3xxx_uart_gpio_ok;
-}
-
-static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl)
-{
-	if (port->mapbase == _Ser3UTCR0) {
-		if (!h3xxx_uart_request_gpios())
-			return;
-		gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS));
-	}
-}
-
-static u_int h3xxx_uart_get_mctrl(struct uart_port *port)
-{
-	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-
-	if (port->mapbase == _Ser3UTCR0) {
-		if (!h3xxx_uart_request_gpios())
-			return ret;
-		/*
-		 * DCD and CTS bits are inverted in GPLR by RS232 transceiver
-		 */
-		if (gpio_get_value(H3XXX_GPIO_COM_DCD))
-			ret &= ~TIOCM_CD;
-		if (gpio_get_value(H3XXX_GPIO_COM_CTS))
-			ret &= ~TIOCM_CTS;
-	}
-
-	return ret;
-}
-
 static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
 {
 	if (port->mapbase == _Ser3UTCR0) {
@@ -170,12 +119,20 @@ static int h3xxx_uart_set_wake(struct uart_port *port, u_int enable)
 }
 
 static struct sa1100_port_fns h3xxx_port_fns __initdata = {
-	.set_mctrl	= h3xxx_uart_set_mctrl,
-	.get_mctrl	= h3xxx_uart_get_mctrl,
 	.pm		= h3xxx_uart_pm,
 	.set_wake	= h3xxx_uart_set_wake,
 };
 
+static struct gpiod_lookup_table h3xxx_uart3_gpio_table = {
+	.dev_id = "sa11x0-uart.3",
+	.table = {
+		GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_DCD, "dcd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_CTS, "cts", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_RTS, "rts", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 /*
  * EGPIO
  */
@@ -283,6 +240,7 @@ static struct gpiod_lookup_table h3xxx_pcmcia_gpio_table = {
 void __init h3xxx_mach_init(void)
 {
 	gpiod_add_lookup_table(&h3xxx_pcmcia_gpio_table);
+	gpiod_add_lookup_table(&h3xxx_uart3_gpio_table);
 	sa1100_register_uart_fns(&h3xxx_port_fns);
 	sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
 	platform_add_devices(h3xxx_devices, ARRAY_SIZE(h3xxx_devices));
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 643d5f2d9af9..9faf602666cf 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -49,8 +49,6 @@
 /* init funcs */
 static void __init hackkit_map_io(void);
 
-static u_int hackkit_get_mctrl(struct uart_port *port);
-static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl);
 static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate);
 
 /**********************************************************************
@@ -71,8 +69,6 @@ static struct map_desc hackkit_io_desc[] __initdata = {
 };
 
 static struct sa1100_port_fns hackkit_port_fns __initdata = {
-	.set_mctrl	= hackkit_set_mctrl,
-	.get_mctrl	= hackkit_get_mctrl,
 	.pm		= hackkit_uart_pm,
 };
 
@@ -105,50 +101,6 @@ static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
 	/* TODO: switch on/off uart in powersave mode */
 }
 
-/*
- * Note! this can be called from IRQ context.
- * FIXME: No modem ctrl lines yet.
- */
-static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl)
-{
-#if 0
-	if (port->mapbase == _Ser1UTCR0) {
-		u_int set = 0, clear = 0;
-
-		if (mctrl & TIOCM_RTS)
-			set |= PT_CTRL2_RS1_RTS;
-		else
-			clear |= PT_CTRL2_RS1_RTS;
-
-		if (mctrl & TIOCM_DTR)
-			set |= PT_CTRL2_RS1_DTR;
-		else
-			clear |= PT_CTRL2_RS1_DTR;
-
-		PTCTRL2_clear(clear);
-		PTCTRL2_set(set);
-	}
-#endif
-}
-
-static u_int hackkit_get_mctrl(struct uart_port *port)
-{
-	u_int ret = 0;
-#if 0
-	u_int irqsr = PT_IRQSR;
-
-	/* need 2 reads to read current value */
-	irqsr = PT_IRQSR;
-
-	/* TODO: check IRQ source register for modem/com
-	 status lines and set them correctly. */
-#endif
-
-	ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-
-	return ret;
-}
-
 static struct mtd_partition hackkit_partitions[] = {
 	{
 		.name		= "BLOB",
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index a671e4c994cf..6876bc1e33b4 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -11,7 +11,6 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/platform_data/sa11x0-serial.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/serial_core.h>
@@ -49,23 +48,8 @@
 #define IRR_SA1111	(1 << 2)
 
 #define NCR_NGPIO	7
-
-#define MDM_CTL0_RTS1	(1 << 0)
-#define MDM_CTL0_DTR1	(1 << 1)
-#define MDM_CTL0_RTS2	(1 << 2)
-#define MDM_CTL0_DTR2	(1 << 3)
 #define MDM_CTL0_NGPIO	4
-
-#define MDM_CTL1_CTS1	(1 << 0)
-#define MDM_CTL1_DSR1	(1 << 1)
-#define MDM_CTL1_DCD1	(1 << 2)
-#define MDM_CTL1_CTS2	(1 << 3)
-#define MDM_CTL1_DSR2	(1 << 4)
-#define MDM_CTL1_DCD2	(1 << 5)
 #define MDM_CTL1_NGPIO	6
-
-#define AUD_SEL_1341	(1 << 0)
-#define AUD_MUTE_1341	(1 << 1)
 #define AUD_NGPIO	2
 
 extern void sa1110_mb_disable(void);
@@ -97,6 +81,30 @@ struct neponset_drvdata {
 	struct gpio_chip *gpio[4];
 };
 
+static struct gpiod_lookup_table neponset_uart1_gpio_table = {
+	.dev_id = "sa11x0-uart.1",
+	.table = {
+		GPIO_LOOKUP("neponset-mdm-ctl0", 2, "rts", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("neponset-mdm-ctl0", 3, "dtr", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("neponset-mdm-ctl1", 3, "cts", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("neponset-mdm-ctl1", 4, "dsr", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("neponset-mdm-ctl1", 5, "dcd", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table neponset_uart3_gpio_table = {
+	.dev_id = "sa11x0-uart.3",
+	.table = {
+		GPIO_LOOKUP("neponset-mdm-ctl0", 0, "rts", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("neponset-mdm-ctl0", 1, "dtr", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("neponset-mdm-ctl1", 0, "cts", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("neponset-mdm-ctl1", 1, "dsr", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("neponset-mdm-ctl1", 2, "dcd", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct gpiod_lookup_table neponset_pcmcia_table = {
 	.dev_id = "1800",
 	.table = {
@@ -124,69 +132,6 @@ void neponset_ncr_frob(unsigned int mask, unsigned int val)
 }
 EXPORT_SYMBOL(neponset_ncr_frob);
 
-static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
-{
-	struct neponset_drvdata *n = nep;
-	unsigned long mask, val = 0;
-
-	if (!n)
-		return;
-
-	if (port->mapbase == _Ser1UTCR0) {
-		mask = MDM_CTL0_RTS2 | MDM_CTL0_DTR2;
-
-		if (!(mctrl & TIOCM_RTS))
-			val |= MDM_CTL0_RTS2;
-
-		if (!(mctrl & TIOCM_DTR))
-			val |= MDM_CTL0_DTR2;
-	} else if (port->mapbase == _Ser3UTCR0) {
-		mask = MDM_CTL0_RTS1 | MDM_CTL0_DTR1;
-
-		if (!(mctrl & TIOCM_RTS))
-			val |= MDM_CTL0_RTS1;
-
-		if (!(mctrl & TIOCM_DTR))
-			val |= MDM_CTL0_DTR1;
-	}
-
-	n->gpio[1]->set_multiple(n->gpio[1], &mask, &val);
-}
-
-static u_int neponset_get_mctrl(struct uart_port *port)
-{
-	void __iomem *base = nep->base;
-	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-	u_int mdm_ctl1;
-
-	if (!base)
-		return ret;
-
-	mdm_ctl1 = readb_relaxed(base + MDM_CTL_1);
-	if (port->mapbase == _Ser1UTCR0) {
-		if (mdm_ctl1 & MDM_CTL1_DCD2)
-			ret &= ~TIOCM_CD;
-		if (mdm_ctl1 & MDM_CTL1_CTS2)
-			ret &= ~TIOCM_CTS;
-		if (mdm_ctl1 & MDM_CTL1_DSR2)
-			ret &= ~TIOCM_DSR;
-	} else if (port->mapbase == _Ser3UTCR0) {
-		if (mdm_ctl1 & MDM_CTL1_DCD1)
-			ret &= ~TIOCM_CD;
-		if (mdm_ctl1 & MDM_CTL1_CTS1)
-			ret &= ~TIOCM_CTS;
-		if (mdm_ctl1 & MDM_CTL1_DSR1)
-			ret &= ~TIOCM_DSR;
-	}
-
-	return ret;
-}
-
-static struct sa1100_port_fns neponset_port_fns = {
-	.set_mctrl	= neponset_set_mctrl,
-	.get_mctrl	= neponset_get_mctrl,
-};
-
 /*
  * Install handler for Neponset IRQ.  Note that we have to loop here
  * since the ETHERNET and USAR IRQs are level based, and we need to
@@ -388,6 +333,8 @@ static int neponset_probe(struct platform_device *dev)
 			   d->base + AUD_CTL, AUD_NGPIO, false,
 			   neponset_aud_names);
 
+	gpiod_add_lookup_table(&neponset_uart1_gpio_table);
+	gpiod_add_lookup_table(&neponset_uart3_gpio_table);
 	gpiod_add_lookup_table(&neponset_pcmcia_table);
 
 	/*
@@ -402,8 +349,6 @@ static int neponset_probe(struct platform_device *dev)
 		 d->irq_base, d->irq_base + NEP_IRQ_NR - 1);
 	nep = d;
 
-	sa1100_register_uart_fns(&neponset_port_fns);
-
 	/* Ensure that the memory bus request/grant signals are setup */
 	sa1110_mb_disable();
 
@@ -442,6 +387,8 @@ static int neponset_remove(struct platform_device *dev)
 		platform_device_unregister(d->smc91x);
 
 	gpiod_remove_lookup_table(&neponset_pcmcia_table);
+	gpiod_remove_lookup_table(&neponset_uart3_gpio_table);
+	gpiod_remove_lookup_table(&neponset_uart1_gpio_table);
 
 	irq_set_chained_handler(irq, NULL);
 	irq_free_descs(d->irq_base, NEP_IRQ_NR);
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 0d31251e04cc..2c86d196fb3b 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -511,6 +511,7 @@ config SERIAL_SA1100
 	bool "SA1100 serial port support"
 	depends on ARCH_SA1100
 	select SERIAL_CORE
+	select SERIAL_MCTRL_GPIO if GPIOLIB
 	help
 	  If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
 	  can enable its onboard serial port by enabling this option.
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index a399772be3fc..8e618129e65c 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -28,6 +28,8 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 
+#include "serial_mctrl_gpio.h"
+
 /* We've been assigned a range on the "Low-density serial ports" major */
 #define SERIAL_SA1100_MAJOR	204
 #define MINOR_START		5
@@ -77,6 +79,7 @@ struct sa1100_port {
 	struct uart_port	port;
 	struct timer_list	timer;
 	unsigned int		old_status;
+	struct mctrl_gpios	*gpios;
 };
 
 /*
@@ -174,6 +177,8 @@ static void sa1100_enable_ms(struct uart_port *port)
 		container_of(port, struct sa1100_port, port);
 
 	mod_timer(&sport->timer, jiffies);
+
+	mctrl_gpio_enable_ms(sport->gpios);
 }
 
 static void
@@ -322,11 +327,21 @@ static unsigned int sa1100_tx_empty(struct uart_port *port)
 
 static unsigned int sa1100_get_mctrl(struct uart_port *port)
 {
-	return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+	struct sa1100_port *sport =
+		container_of(port, struct sa1100_port, port);
+	int ret = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+
+	mctrl_gpio_get(sport->gpios, &ret);
+
+	return ret;
 }
 
 static void sa1100_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
+	struct sa1100_port *sport =
+		container_of(port, struct sa1100_port, port);
+
+	mctrl_gpio_set(sport->gpios, mctrl);
 }
 
 /*
@@ -842,6 +857,31 @@ static int sa1100_serial_resume(struct platform_device *dev)
 	return 0;
 }
 
+static int sa1100_serial_add_one_port(struct sa1100_port *sport, struct platform_device *dev)
+{
+	sport->port.dev = &dev->dev;
+
+	// mctrl_gpio_init() requires that the GPIO driver supports interrupts,
+	// but we need to support GPIO drivers for hardware that has no such
+	// interrupts.  Use mctrl_gpio_init_noauto() instead.
+	sport->gpios = mctrl_gpio_init_noauto(sport->port.dev, 0);
+	if (IS_ERR(sport->gpios)) {
+		int err = PTR_ERR(sport->gpios);
+
+		dev_err(sport->port.dev, "failed to get mctrl gpios: %d\n",
+			err);
+
+		if (err == -EPROBE_DEFER)
+			return err;
+
+		sport->gpios = NULL;
+	}
+
+	platform_set_drvdata(dev, sport);
+
+	return uart_add_one_port(&sa1100_reg, &sport->port);
+}
+
 static int sa1100_serial_probe(struct platform_device *dev)
 {
 	struct resource *res = dev->resource;
@@ -856,9 +896,7 @@ static int sa1100_serial_probe(struct platform_device *dev)
 			if (sa1100_ports[i].port.mapbase != res->start)
 				continue;
 
-			sa1100_ports[i].port.dev = &dev->dev;
-			uart_add_one_port(&sa1100_reg, &sa1100_ports[i].port);
-			platform_set_drvdata(dev, &sa1100_ports[i]);
+			sa1100_serial_add_one_port(&sa1100_ports[i], dev);
 			break;
 		}
 	}