summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAriel D'Alessandro <ariel@vanguardiasur.com.ar>2015-08-01 15:37:16 -0300
committerWim Van Sebroeck <wim@iguana.be>2015-09-09 21:35:59 +0200
commit7c25f8c9f67708e6464d2221bc311cbd99e950dc (patch)
treebcbec541a7d86d907a42c3a64b125604804794cd
parent4f2d0b2d1b31cbe704c8f94e74e46cb64187ab0c (diff)
downloadblackbird-op-linux-7c25f8c9f67708e6464d2221bc311cbd99e950dc.tar.gz
blackbird-op-linux-7c25f8c9f67708e6464d2221bc311cbd99e950dc.zip
watchdog: NXP LPC18xx Watchdog Timer Driver
This commit adds support for the watchdog timer found in NXP LPC SoCs family, which includes LPC18xx/LPC43xx. Other SoCs in that family may share the same watchdog hardware. Watchdog driver registers a restart handler that will restart the system by performing an incorrect feed after ensuring the watchdog is enabled in reset mode. As watchdog cannot be disabled in hardware, driver's stop routine will regularly send a keepalive ping using a timer. Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-rw-r--r--drivers/watchdog/Kconfig11
-rw-r--r--drivers/watchdog/Makefile1
-rw-r--r--drivers/watchdog/lpc18xx_wdt.c340
3 files changed, 352 insertions, 0 deletions
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 241fafde42cb..b69bd67eea96 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -558,6 +558,17 @@ config DIGICOLOR_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called digicolor_wdt.
+config LPC18XX_WATCHDOG
+ tristate "LPC18xx/43xx Watchdog"
+ depends on ARCH_LPC18XX || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Say Y here if to include support for the watchdog timer
+ in NXP LPC SoCs family, which includes LPC18xx/LPC43xx
+ processors.
+ To compile this driver as a module, choose M here: the
+ module will be called lpc18xx_wdt.
+
# AVR32 Architecture
config AT32AP700X_WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 59ea9a1b8e76..1b0ef48bf19a 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o
obj-$(CONFIG_MEDIATEK_WATCHDOG) += mtk_wdt.o
obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o
+obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/lpc18xx_wdt.c b/drivers/watchdog/lpc18xx_wdt.c
new file mode 100644
index 000000000000..00ff5bdd2db0
--- /dev/null
+++ b/drivers/watchdog/lpc18xx_wdt.c
@@ -0,0 +1,340 @@
+/*
+ * NXP LPC18xx Watchdog Timer (WDT)
+ *
+ * Copyright (c) 2015 Ariel D'Alessandro <ariel@vanguardiasur.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * Notes
+ * -----
+ * The Watchdog consists of a fixed divide-by-4 clock pre-scaler and a 24-bit
+ * counter which decrements on every clock cycle.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/watchdog.h>
+
+/* Registers */
+#define LPC18XX_WDT_MOD 0x00
+#define LPC18XX_WDT_MOD_WDEN BIT(0)
+#define LPC18XX_WDT_MOD_WDRESET BIT(1)
+
+#define LPC18XX_WDT_TC 0x04
+#define LPC18XX_WDT_TC_MIN 0xff
+#define LPC18XX_WDT_TC_MAX 0xffffff
+
+#define LPC18XX_WDT_FEED 0x08
+#define LPC18XX_WDT_FEED_MAGIC1 0xaa
+#define LPC18XX_WDT_FEED_MAGIC2 0x55
+
+#define LPC18XX_WDT_TV 0x0c
+
+/* Clock pre-scaler */
+#define LPC18XX_WDT_CLK_DIV 4
+
+/* Timeout values in seconds */
+#define LPC18XX_WDT_DEF_TIMEOUT 30U
+
+static int heartbeat;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds (default="
+ __MODULE_STRING(LPC18XX_WDT_DEF_TIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct lpc18xx_wdt_dev {
+ struct watchdog_device wdt_dev;
+ struct clk *reg_clk;
+ struct clk *wdt_clk;
+ unsigned long clk_rate;
+ void __iomem *base;
+ struct timer_list timer;
+ struct notifier_block restart_handler;
+ spinlock_t lock;
+};
+
+static int lpc18xx_wdt_feed(struct watchdog_device *wdt_dev)
+{
+ struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev);
+ unsigned long flags;
+
+ /*
+ * An abort condition will occur if an interrupt happens during the feed
+ * sequence.
+ */
+ spin_lock_irqsave(&lpc18xx_wdt->lock, flags);
+ writel(LPC18XX_WDT_FEED_MAGIC1, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+ writel(LPC18XX_WDT_FEED_MAGIC2, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+ spin_unlock_irqrestore(&lpc18xx_wdt->lock, flags);
+
+ return 0;
+}
+
+static void lpc18xx_wdt_timer_feed(unsigned long data)
+{
+ struct watchdog_device *wdt_dev = (struct watchdog_device *)data;
+ struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev);
+
+ lpc18xx_wdt_feed(wdt_dev);
+
+ /* Use safe value (1/2 of real timeout) */
+ mod_timer(&lpc18xx_wdt->timer, jiffies +
+ msecs_to_jiffies((wdt_dev->timeout * MSEC_PER_SEC) / 2));
+}
+
+/*
+ * Since LPC18xx Watchdog cannot be disabled in hardware, we must keep feeding
+ * it with a timer until userspace watchdog software takes over.
+ */
+static int lpc18xx_wdt_stop(struct watchdog_device *wdt_dev)
+{
+ lpc18xx_wdt_timer_feed((unsigned long)wdt_dev);
+
+ return 0;
+}
+
+static void __lpc18xx_wdt_set_timeout(struct lpc18xx_wdt_dev *lpc18xx_wdt)
+{
+ unsigned int val;
+
+ val = DIV_ROUND_UP(lpc18xx_wdt->wdt_dev.timeout * lpc18xx_wdt->clk_rate,
+ LPC18XX_WDT_CLK_DIV);
+ writel(val, lpc18xx_wdt->base + LPC18XX_WDT_TC);
+}
+
+static int lpc18xx_wdt_set_timeout(struct watchdog_device *wdt_dev,
+ unsigned int new_timeout)
+{
+ struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev);
+
+ lpc18xx_wdt->wdt_dev.timeout = new_timeout;
+ __lpc18xx_wdt_set_timeout(lpc18xx_wdt);
+
+ return 0;
+}
+
+unsigned int lpc18xx_wdt_get_timeleft(struct watchdog_device *wdt_dev)
+{
+ struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev);
+ unsigned int val;
+
+ val = readl(lpc18xx_wdt->base + LPC18XX_WDT_TV);
+ return (val * LPC18XX_WDT_CLK_DIV) / lpc18xx_wdt->clk_rate;
+}
+
+static int lpc18xx_wdt_start(struct watchdog_device *wdt_dev)
+{
+ struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev);
+ unsigned int val;
+
+ if (timer_pending(&lpc18xx_wdt->timer))
+ del_timer(&lpc18xx_wdt->timer);
+
+ val = readl(lpc18xx_wdt->base + LPC18XX_WDT_MOD);
+ val |= LPC18XX_WDT_MOD_WDEN;
+ val |= LPC18XX_WDT_MOD_WDRESET;
+ writel(val, lpc18xx_wdt->base + LPC18XX_WDT_MOD);
+
+ /*
+ * Setting the WDEN bit in the WDMOD register is not sufficient to
+ * enable the Watchdog. A valid feed sequence must be completed after
+ * setting WDEN before the Watchdog is capable of generating a reset.
+ */
+ lpc18xx_wdt_feed(wdt_dev);
+
+ return 0;
+}
+
+static struct watchdog_info lpc18xx_wdt_info = {
+ .identity = "NXP LPC18xx Watchdog",
+ .options = WDIOF_SETTIMEOUT |
+ WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops lpc18xx_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = lpc18xx_wdt_start,
+ .stop = lpc18xx_wdt_stop,
+ .ping = lpc18xx_wdt_feed,
+ .set_timeout = lpc18xx_wdt_set_timeout,
+ .get_timeleft = lpc18xx_wdt_get_timeleft,
+};
+
+static int lpc18xx_wdt_restart(struct notifier_block *this, unsigned long mode,
+ void *cmd)
+{
+ struct lpc18xx_wdt_dev *lpc18xx_wdt = container_of(this,
+ struct lpc18xx_wdt_dev, restart_handler);
+ unsigned long flags;
+ int val;
+
+ /*
+ * Incorrect feed sequence causes immediate watchdog reset if enabled.
+ */
+ spin_lock_irqsave(&lpc18xx_wdt->lock, flags);
+
+ val = readl(lpc18xx_wdt->base + LPC18XX_WDT_MOD);
+ val |= LPC18XX_WDT_MOD_WDEN;
+ val |= LPC18XX_WDT_MOD_WDRESET;
+ writel(val, lpc18xx_wdt->base + LPC18XX_WDT_MOD);
+
+ writel(LPC18XX_WDT_FEED_MAGIC1, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+ writel(LPC18XX_WDT_FEED_MAGIC2, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+
+ writel(LPC18XX_WDT_FEED_MAGIC1, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+ writel(LPC18XX_WDT_FEED_MAGIC1, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+
+ spin_unlock_irqrestore(&lpc18xx_wdt->lock, flags);
+
+ return NOTIFY_OK;
+}
+
+static int lpc18xx_wdt_probe(struct platform_device *pdev)
+{
+ struct lpc18xx_wdt_dev *lpc18xx_wdt;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int ret;
+
+ lpc18xx_wdt = devm_kzalloc(dev, sizeof(*lpc18xx_wdt), GFP_KERNEL);
+ if (!lpc18xx_wdt)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ lpc18xx_wdt->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(lpc18xx_wdt->base))
+ return PTR_ERR(lpc18xx_wdt->base);
+
+ lpc18xx_wdt->reg_clk = devm_clk_get(dev, "reg");
+ if (IS_ERR(lpc18xx_wdt->reg_clk)) {
+ dev_err(dev, "failed to get the reg clock\n");
+ return PTR_ERR(lpc18xx_wdt->reg_clk);
+ }
+
+ lpc18xx_wdt->wdt_clk = devm_clk_get(dev, "wdtclk");
+ if (IS_ERR(lpc18xx_wdt->wdt_clk)) {
+ dev_err(dev, "failed to get the wdt clock\n");
+ return PTR_ERR(lpc18xx_wdt->wdt_clk);
+ }
+
+ ret = clk_prepare_enable(lpc18xx_wdt->reg_clk);
+ if (ret) {
+ dev_err(dev, "could not prepare or enable sys clock\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(lpc18xx_wdt->wdt_clk);
+ if (ret) {
+ dev_err(dev, "could not prepare or enable wdt clock\n");
+ goto disable_reg_clk;
+ }
+
+ /* We use the clock rate to calculate timeouts */
+ lpc18xx_wdt->clk_rate = clk_get_rate(lpc18xx_wdt->wdt_clk);
+ if (lpc18xx_wdt->clk_rate == 0) {
+ dev_err(dev, "failed to get clock rate\n");
+ ret = -EINVAL;
+ goto disable_wdt_clk;
+ }
+
+ lpc18xx_wdt->wdt_dev.info = &lpc18xx_wdt_info;
+ lpc18xx_wdt->wdt_dev.ops = &lpc18xx_wdt_ops;
+
+ lpc18xx_wdt->wdt_dev.min_timeout = DIV_ROUND_UP(LPC18XX_WDT_TC_MIN *
+ LPC18XX_WDT_CLK_DIV, lpc18xx_wdt->clk_rate);
+
+ lpc18xx_wdt->wdt_dev.max_timeout = (LPC18XX_WDT_TC_MAX *
+ LPC18XX_WDT_CLK_DIV) / lpc18xx_wdt->clk_rate;
+
+ lpc18xx_wdt->wdt_dev.timeout = min(lpc18xx_wdt->wdt_dev.max_timeout,
+ LPC18XX_WDT_DEF_TIMEOUT);
+
+ spin_lock_init(&lpc18xx_wdt->lock);
+
+ lpc18xx_wdt->wdt_dev.parent = dev;
+ watchdog_set_drvdata(&lpc18xx_wdt->wdt_dev, lpc18xx_wdt);
+
+ ret = watchdog_init_timeout(&lpc18xx_wdt->wdt_dev, heartbeat, dev);
+
+ __lpc18xx_wdt_set_timeout(lpc18xx_wdt);
+
+ setup_timer(&lpc18xx_wdt->timer, lpc18xx_wdt_timer_feed,
+ (unsigned long)&lpc18xx_wdt->wdt_dev);
+
+ watchdog_set_nowayout(&lpc18xx_wdt->wdt_dev, nowayout);
+
+ platform_set_drvdata(pdev, lpc18xx_wdt);
+
+ ret = watchdog_register_device(&lpc18xx_wdt->wdt_dev);
+ if (ret)
+ goto disable_wdt_clk;
+
+ lpc18xx_wdt->restart_handler.notifier_call = lpc18xx_wdt_restart;
+ lpc18xx_wdt->restart_handler.priority = 128;
+ ret = register_restart_handler(&lpc18xx_wdt->restart_handler);
+ if (ret)
+ dev_warn(dev, "failed to register restart handler: %d\n", ret);
+
+ return 0;
+
+disable_wdt_clk:
+ clk_disable_unprepare(lpc18xx_wdt->wdt_clk);
+disable_reg_clk:
+ clk_disable_unprepare(lpc18xx_wdt->reg_clk);
+ return ret;
+}
+
+static void lpc18xx_wdt_shutdown(struct platform_device *pdev)
+{
+ struct lpc18xx_wdt_dev *lpc18xx_wdt = platform_get_drvdata(pdev);
+
+ lpc18xx_wdt_stop(&lpc18xx_wdt->wdt_dev);
+}
+
+static int lpc18xx_wdt_remove(struct platform_device *pdev)
+{
+ struct lpc18xx_wdt_dev *lpc18xx_wdt = platform_get_drvdata(pdev);
+
+ unregister_restart_handler(&lpc18xx_wdt->restart_handler);
+
+ dev_warn(&pdev->dev, "I quit now, hardware will probably reboot!\n");
+ del_timer(&lpc18xx_wdt->timer);
+
+ watchdog_unregister_device(&lpc18xx_wdt->wdt_dev);
+ clk_disable_unprepare(lpc18xx_wdt->wdt_clk);
+ clk_disable_unprepare(lpc18xx_wdt->reg_clk);
+
+ return 0;
+}
+
+static const struct of_device_id lpc18xx_wdt_match[] = {
+ { .compatible = "nxp,lpc1850-wwdt" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_wdt_match);
+
+static struct platform_driver lpc18xx_wdt_driver = {
+ .driver = {
+ .name = "lpc18xx-wdt",
+ .of_match_table = lpc18xx_wdt_match,
+ },
+ .probe = lpc18xx_wdt_probe,
+ .remove = lpc18xx_wdt_remove,
+ .shutdown = lpc18xx_wdt_shutdown,
+};
+module_platform_driver(lpc18xx_wdt_driver);
+
+MODULE_AUTHOR("Ariel D'Alessandro <ariel@vanguardiasur.com.ar>");
+MODULE_DESCRIPTION("NXP LPC18xx Watchdog Timer Driver");
+MODULE_LICENSE("GPL v2");
OpenPOWER on IntegriCloud