bfin_mac: Move the Analog Devices Inc driver

Move the Analog Devices Inc driver into drivers/net/ethernet/adi/ and
make the necessary Kconfig and Makefile changes.

CC: <uclinux-dist-devel@blackfin.uclinux.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Bob Liu <bob.liu@analog.com>

9 files changed, 76 insertions, 48 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 879c17ebf38a..15d70213be53 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1446,7 +1446,7 @@ BLACKFIN EMAC DRIVER
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
-F:	drivers/net/bfin_mac.*
+F:	drivers/net/ethernet/adi/
 
 BLACKFIN RTC DRIVER
 M:	Mike Frysinger <vapier.adi@gmail.com>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index fd333803be8c..10c25b5bb2fe 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -252,52 +252,6 @@ config SH_ETH
 	  This driver supporting CPUs are:
 		- SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757.
 
-config BFIN_MAC
-	tristate "Blackfin on-chip MAC support"
-	depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
-	select CRC32
-	select MII
-	select PHYLIB
-	select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
-	help
-	  This is the driver for Blackfin on-chip mac device. Say Y if you want it
-	  compiled into the kernel. This driver is also available as a module
-	  ( = code which can be inserted in and removed from the running kernel
-	  whenever you want). The module will be called bfin_mac.
-
-config BFIN_MAC_USE_L1
-	bool "Use L1 memory for rx/tx packets"
-	depends on BFIN_MAC && (BF527 || BF537)
-	default y
-	help
-	  To get maximum network performance, you should use L1 memory as rx/tx buffers.
-	  Say N here if you want to reserve L1 memory for other uses.
-
-config BFIN_TX_DESC_NUM
-	int "Number of transmit buffer packets"
-	depends on BFIN_MAC
-	range 6 10 if BFIN_MAC_USE_L1
-	range 10 100
-	default "10"
-	help
-	  Set the number of buffer packets used in driver.
-
-config BFIN_RX_DESC_NUM
-	int "Number of receive buffer packets"
-	depends on BFIN_MAC
-	range 20 100 if BFIN_MAC_USE_L1
-	range 20 800
-	default "20"
-	help
-	  Set the number of buffer packets used in driver.
-
-config BFIN_MAC_USE_HWSTAMP
-	bool "Use IEEE 1588 hwstamp"
-	depends on BFIN_MAC && BF518
-	default y
-	help
-	  To support the IEEE 1588 Precision Time Protocol (PTP), select y here
-
 config NET_NETX
 	tristate "NetX Ethernet support"
 	select MII
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 8e6dbd741206..d249d76ce2f9 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -57,7 +57,6 @@ obj-$(CONFIG_EQUALIZER) += eql.o
 obj-$(CONFIG_TUN) += tun.o
 obj-$(CONFIG_VETH) += veth.o
 obj-$(CONFIG_NET_NETX) += netx-eth.o
-obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
 obj-$(CONFIG_DM9000) += dm9000.o
 obj-$(CONFIG_ENC28J60) += enc28j60.o
 obj-$(CONFIG_ETHOC) += ethoc.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 6b3b3dc172e7..e087337f92b5 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -15,6 +15,7 @@ source "drivers/net/ethernet/3com/Kconfig"
 source "drivers/net/ethernet/amd/Kconfig"
 source "drivers/net/ethernet/apple/Kconfig"
 source "drivers/net/ethernet/atheros/Kconfig"
+source "drivers/net/ethernet/adi/Kconfig"
 source "drivers/net/ethernet/broadcom/Kconfig"
 source "drivers/net/ethernet/brocade/Kconfig"
 source "drivers/net/ethernet/chelsio/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 2a1cbce02789..826db27564af 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_NET_VENDOR_8390) += 8390/
 obj-$(CONFIG_NET_VENDOR_AMD) += amd/
 obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
 obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
+obj-$(CONFIG_NET_BFIN) += adi/
 obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
 obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
 obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
diff --git a/drivers/net/ethernet/adi/Kconfig b/drivers/net/ethernet/adi/Kconfig
new file mode 100644
index 000000000000..6de9851045cb
--- /dev/null
+++ b/drivers/net/ethernet/adi/Kconfig
@@ -0,0 +1,68 @@
+#
+# Blackfin device configuration
+#
+
+config NET_BFIN
+	bool "Blackfin devices"
+	depends on BF516 || BF518 || BF526 || BF527 || BF536 || BF537
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y.
+	  Make sure you know the name of your card. Read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  If unsure, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the remaining Blackfin card questions. If you say Y, you will be
+	  asked for your specific card in the following questions.
+
+if NET_BFIN
+
+config BFIN_MAC
+	tristate "Blackfin on-chip MAC support"
+	depends on (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
+	select CRC32
+	select MII
+	select PHYLIB
+	select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
+	---help---
+	  This is the driver for Blackfin on-chip mac device. Say Y if you want
+	  it compiled into the kernel. This driver is also available as a
+	  module ( = code which can be inserted in and removed from the running
+	  kernel whenever you want). The module will be called bfin_mac.
+
+config BFIN_MAC_USE_L1
+	bool "Use L1 memory for rx/tx packets"
+	depends on BFIN_MAC && (BF527 || BF537)
+	default y
+	---help---
+	  To get maximum network performance, you should use L1 memory as rx/tx
+	  buffers. Say N here if you want to reserve L1 memory for other uses.
+
+config BFIN_TX_DESC_NUM
+	int "Number of transmit buffer packets"
+	depends on BFIN_MAC
+	range 6 10 if BFIN_MAC_USE_L1
+	range 10 100
+	default "10"
+	---help---
+	  Set the number of buffer packets used in driver.
+
+config BFIN_RX_DESC_NUM
+	int "Number of receive buffer packets"
+	depends on BFIN_MAC
+	range 20 100 if BFIN_MAC_USE_L1
+	range 20 800
+	default "20"
+	---help---
+	  Set the number of buffer packets used in driver.
+
+config BFIN_MAC_USE_HWSTAMP
+	bool "Use IEEE 1588 hwstamp"
+	depends on BFIN_MAC && BF518
+	default y
+	---help---
+	  To support the IEEE 1588 Precision Time Protocol (PTP), select y here
+
+endif # NET_BFIN
diff --git a/drivers/net/ethernet/adi/Makefile b/drivers/net/ethernet/adi/Makefile
new file mode 100644
index 000000000000..b1fbe195d0e8
--- /dev/null
+++ b/drivers/net/ethernet/adi/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Blackfin device drivers.
+#
+
+obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
diff --git a/drivers/net/bfin_mac.c b/drivers/net/ethernet/adi/bfin_mac.c
index 6c019e148546..6c019e148546 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/ethernet/adi/bfin_mac.c
diff --git a/drivers/net/bfin_mac.h b/drivers/net/ethernet/adi/bfin_mac.h
index f8559ac9a403..f8559ac9a403 100644
--- a/drivers/net/bfin_mac.h
+++ b/drivers/net/ethernet/adi/bfin_mac.h