summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@stericsson.com>2010-04-08 07:38:52 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2010-04-14 16:08:17 +0100
commit771dc157e06d69fcece0b2c8a29b9010345d8e9a (patch)
tree69fb6b536735af812feca84a734d869e57844b47
parent8e797a7e4f588fb3b9cfe9860b00dcd3b14f8b60 (diff)
downloadblackbird-op-linux-771dc157e06d69fcece0b2c8a29b9010345d8e9a.tar.gz
blackbird-op-linux-771dc157e06d69fcece0b2c8a29b9010345d8e9a.zip
ARM: 6032/1: ARM: MMCI: support 8bit mode on the ST Micro version
This adds support for an 8bit wide bus to the card (data lines MCIDAT0 through 7 exist) on the ST Micro version and alters the U300 platform to support this. Also add some ST_ prefix to the ST-specific registers. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-rw-r--r--arch/arm/mach-u300/mmc.c2
-rw-r--r--drivers/mmc/host/mmci.c6
-rw-r--r--drivers/mmc/host/mmci.h6
3 files changed, 9 insertions, 5 deletions
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 109f5a6e71c7..ef8032d2f5bf 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -105,7 +105,7 @@ int __devinit mmc_init(struct amba_device *adev)
mmci_card->mmc0_plat_data.gpio_wp = -1;
mmci_card->mmc0_plat_data.gpio_cd = -1;
mmci_card->mmc0_plat_data.capabilities = MMC_CAP_MMC_HIGHSPEED |
- MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA;
+ MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 84c103a7ee13..7e70c1a06d8a 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -55,14 +55,16 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
host->cclk = host->mclk / (2 * (clk + 1));
}
if (host->hw_designer == AMBA_VENDOR_ST)
- clk |= MCI_FCEN; /* Bug fix in ST IP block */
+ clk |= MCI_ST_FCEN; /* Bug fix in ST IP block */
clk |= MCI_CLK_ENABLE;
/* This hasn't proven to be worthwhile */
/* clk |= MCI_CLK_PWRSAVE; */
}
if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4)
- clk |= MCI_WIDE_BUS;
+ clk |= MCI_4BIT_BUS;
+ if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_8)
+ clk |= MCI_ST_8BIT_BUS;
writel(clk, host->base + MMCICLOCK);
}
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 1ceb9a90f59b..d77062e5e3af 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -25,9 +25,11 @@
#define MCI_CLK_ENABLE (1 << 8)
#define MCI_CLK_PWRSAVE (1 << 9)
#define MCI_CLK_BYPASS (1 << 10)
-#define MCI_WIDE_BUS (1 << 11)
+#define MCI_4BIT_BUS (1 << 11)
+/* 8bit wide buses supported in ST Micro versions */
+#define MCI_ST_8BIT_BUS (1 << 12)
/* HW flow control on the ST Micro version */
-#define MCI_FCEN (1 << 13)
+#define MCI_ST_FCEN (1 << 13)
#define MMCIARGUMENT 0x008
#define MMCICOMMAND 0x00c
OpenPOWER on IntegriCloud