Merge branch 'clk-bcm2835' into clk-next

* clk-bcm2835:
  clk: bcm2835: Add support for programming the audio domain clocks
  clk: bcm2835: Add binding docs for the new platform clock driver.
  clk: bcm2835: Move under bcm/ with other Broadcom SoC clk drivers.

6 files changed, 1668 insertions, 56 deletions

diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
new file mode 100644
index 000000000000..e56a1df3a9d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
@@ -0,0 +1,45 @@
+Broadcom BCM2835 CPRMAN clocks
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CPRMAN clock controller generates clocks in the audio power domain
+of the BCM2835.  There is a level of PLLs deriving from an external
+oscillator, a level of PLL dividers that produce channels off of the
+few PLLs, and a level of mostly-generic clock generators sourcing from
+the PLL channels.  Most other hardware components source from the
+clock generators, but a few (like the ARM or HDMI) will source from
+the PLL dividers directly.
+
+Required properties:
+- compatible:	Should be "brcm,bcm2835-cprman"
+- #clock-cells:	Should be <1>. The permitted clock-specifier values can be
+		  found in include/dt-bindings/clock/bcm2835.h
+- reg:		Specifies base physical address and size of the registers
+- clocks:	The external oscillator clock phandle
+
+Example:
+
+	clk_osc: clock@3 {
+		compatible = "fixed-clock";
+		reg = <3>;
+		#clock-cells = <0>;
+		clock-output-names = "osc";
+		clock-frequency = <19200000>;
+	};
+
+	clocks: cprman@7e101000 {
+		compatible = "brcm,bcm2835-cprman";
+		#clock-cells = <1>;
+		reg = <0x7e101000 0x2000>;
+		clocks = <&clk_osc>;
+	};
+
+	i2c0: i2c@7e205000 {
+		compatible = "brcm,bcm2835-i2c";
+		reg = <0x7e205000 0x1000>;
+		interrupts = <2 21>;
+		clocks = <&clocks BCM2835_CLOCK_VPU>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 6594e53a4444..e44feca7a1ac 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -19,7 +19,6 @@ endif
 obj-$(CONFIG_MACH_ASM9260)		+= clk-asm9260.o
 obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN)	+= clk-axi-clkgen.o
 obj-$(CONFIG_ARCH_AXXIA)		+= clk-axm5516.o
-obj-$(CONFIG_ARCH_BCM2835)		+= clk-bcm2835.o
 obj-$(CONFIG_COMMON_CLK_CDCE706)	+= clk-cdce706.o
 obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
 obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index 8a7a477862c7..ee2349bbe1f1 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -3,4 +3,5 @@ obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona-setup.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm281xx.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm21664.o
 obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
+obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835.o
 obj-$(CONFIG_ARCH_BCM_CYGNUS)	+= clk-cygnus.o
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
new file mode 100644
index 000000000000..39bf5820297e
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -0,0 +1,1575 @@
+/*
+ * Copyright (C) 2010,2015 Broadcom
+ * Copyright (C) 2012 Stephen Warren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/**
+ * DOC: BCM2835 CPRMAN (clock manager for the "audio" domain)
+ *
+ * The clock tree on the 2835 has several levels.  There's a root
+ * oscillator running at 19.2Mhz.  After the oscillator there are 5
+ * PLLs, roughly divided as "camera", "ARM", "core", "DSI displays",
+ * and "HDMI displays".  Those 5 PLLs each can divide their output to
+ * produce up to 4 channels.  Finally, there is the level of clocks to
+ * be consumed by other hardware components (like "H264" or "HDMI
+ * state machine"), which divide off of some subset of the PLL
+ * channels.
+ *
+ * All of the clocks in the tree are exposed in the DT, because the DT
+ * may want to make assignments of the final layer of clocks to the
+ * PLL channels, and some components of the hardware will actually
+ * skip layers of the tree (for example, the pixel clock comes
+ * directly from the PLLH PIX channel without using a CM_*CTL clock
+ * generator).
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/bcm2835.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <dt-bindings/clock/bcm2835.h>
+
+#define CM_PASSWORD		0x5a000000
+
+#define CM_GNRICCTL		0x000
+#define CM_GNRICDIV		0x004
+# define CM_DIV_FRAC_BITS	12
+
+#define CM_VPUCTL		0x008
+#define CM_VPUDIV		0x00c
+#define CM_SYSCTL		0x010
+#define CM_SYSDIV		0x014
+#define CM_PERIACTL		0x018
+#define CM_PERIADIV		0x01c
+#define CM_PERIICTL		0x020
+#define CM_PERIIDIV		0x024
+#define CM_H264CTL		0x028
+#define CM_H264DIV		0x02c
+#define CM_ISPCTL		0x030
+#define CM_ISPDIV		0x034
+#define CM_V3DCTL		0x038
+#define CM_V3DDIV		0x03c
+#define CM_CAM0CTL		0x040
+#define CM_CAM0DIV		0x044
+#define CM_CAM1CTL		0x048
+#define CM_CAM1DIV		0x04c
+#define CM_CCP2CTL		0x050
+#define CM_CCP2DIV		0x054
+#define CM_DSI0ECTL		0x058
+#define CM_DSI0EDIV		0x05c
+#define CM_DSI0PCTL		0x060
+#define CM_DSI0PDIV		0x064
+#define CM_DPICTL		0x068
+#define CM_DPIDIV		0x06c
+#define CM_GP0CTL		0x070
+#define CM_GP0DIV		0x074
+#define CM_GP1CTL		0x078
+#define CM_GP1DIV		0x07c
+#define CM_GP2CTL		0x080
+#define CM_GP2DIV		0x084
+#define CM_HSMCTL		0x088
+#define CM_HSMDIV		0x08c
+#define CM_OTPCTL		0x090
+#define CM_OTPDIV		0x094
+#define CM_PWMCTL		0x0a0
+#define CM_PWMDIV		0x0a4
+#define CM_SMICTL		0x0b0
+#define CM_SMIDIV		0x0b4
+#define CM_TSENSCTL		0x0e0
+#define CM_TSENSDIV		0x0e4
+#define CM_TIMERCTL		0x0e8
+#define CM_TIMERDIV		0x0ec
+#define CM_UARTCTL		0x0f0
+#define CM_UARTDIV		0x0f4
+#define CM_VECCTL		0x0f8
+#define CM_VECDIV		0x0fc
+#define CM_PULSECTL		0x190
+#define CM_PULSEDIV		0x194
+#define CM_SDCCTL		0x1a8
+#define CM_SDCDIV		0x1ac
+#define CM_ARMCTL		0x1b0
+#define CM_EMMCCTL		0x1c0
+#define CM_EMMCDIV		0x1c4
+
+/* General bits for the CM_*CTL regs */
+# define CM_ENABLE			BIT(4)
+# define CM_KILL			BIT(5)
+# define CM_GATE_BIT			6
+# define CM_GATE			BIT(CM_GATE_BIT)
+# define CM_BUSY			BIT(7)
+# define CM_BUSYD			BIT(8)
+# define CM_SRC_SHIFT			0
+# define CM_SRC_BITS			4
+# define CM_SRC_MASK			0xf
+# define CM_SRC_GND			0
+# define CM_SRC_OSC			1
+# define CM_SRC_TESTDEBUG0		2
+# define CM_SRC_TESTDEBUG1		3
+# define CM_SRC_PLLA_CORE		4
+# define CM_SRC_PLLA_PER		4
+# define CM_SRC_PLLC_CORE0		5
+# define CM_SRC_PLLC_PER		5
+# define CM_SRC_PLLC_CORE1		8
+# define CM_SRC_PLLD_CORE		6
+# define CM_SRC_PLLD_PER		6
+# define CM_SRC_PLLH_AUX		7
+# define CM_SRC_PLLC_CORE1		8
+# define CM_SRC_PLLC_CORE2		9
+
+#define CM_OSCCOUNT		0x100
+
+#define CM_PLLA			0x104
+# define CM_PLL_ANARST			BIT(8)
+# define CM_PLLA_HOLDPER		BIT(7)
+# define CM_PLLA_LOADPER		BIT(6)
+# define CM_PLLA_HOLDCORE		BIT(5)
+# define CM_PLLA_LOADCORE		BIT(4)
+# define CM_PLLA_HOLDCCP2		BIT(3)
+# define CM_PLLA_LOADCCP2		BIT(2)
+# define CM_PLLA_HOLDDSI0		BIT(1)
+# define CM_PLLA_LOADDSI0		BIT(0)
+
+#define CM_PLLC			0x108
+# define CM_PLLC_HOLDPER		BIT(7)
+# define CM_PLLC_LOADPER		BIT(6)
+# define CM_PLLC_HOLDCORE2		BIT(5)
+# define CM_PLLC_LOADCORE2		BIT(4)
+# define CM_PLLC_HOLDCORE1		BIT(3)
+# define CM_PLLC_LOADCORE1		BIT(2)
+# define CM_PLLC_HOLDCORE0		BIT(1)
+# define CM_PLLC_LOADCORE0		BIT(0)
+
+#define CM_PLLD			0x10c
+# define CM_PLLD_HOLDPER		BIT(7)
+# define CM_PLLD_LOADPER		BIT(6)
+# define CM_PLLD_HOLDCORE		BIT(5)
+# define CM_PLLD_LOADCORE		BIT(4)
+# define CM_PLLD_HOLDDSI1		BIT(3)
+# define CM_PLLD_LOADDSI1		BIT(2)
+# define CM_PLLD_HOLDDSI0		BIT(1)
+# define CM_PLLD_LOADDSI0		BIT(0)
+
+#define CM_PLLH			0x110
+# define CM_PLLH_LOADRCAL		BIT(2)
+# define CM_PLLH_LOADAUX		BIT(1)
+# define CM_PLLH_LOADPIX		BIT(0)
+
+#define CM_LOCK			0x114
+# define CM_LOCK_FLOCKH			BIT(12)
+# define CM_LOCK_FLOCKD			BIT(11)
+# define CM_LOCK_FLOCKC			BIT(10)
+# define CM_LOCK_FLOCKB			BIT(9)
+# define CM_LOCK_FLOCKA			BIT(8)
+
+#define CM_EVENT		0x118
+#define CM_DSI1ECTL		0x158
+#define CM_DSI1EDIV		0x15c
+#define CM_DSI1PCTL		0x160
+#define CM_DSI1PDIV		0x164
+#define CM_DFTCTL		0x168
+#define CM_DFTDIV		0x16c
+
+#define CM_PLLB			0x170
+# define CM_PLLB_HOLDARM		BIT(1)
+# define CM_PLLB_LOADARM		BIT(0)
+
+#define A2W_PLLA_CTRL		0x1100
+#define A2W_PLLC_CTRL		0x1120
+#define A2W_PLLD_CTRL		0x1140
+#define A2W_PLLH_CTRL		0x1160
+#define A2W_PLLB_CTRL		0x11e0
+# define A2W_PLL_CTRL_PRST_DISABLE	BIT(17)
+# define A2W_PLL_CTRL_PWRDN		BIT(16)
+# define A2W_PLL_CTRL_PDIV_MASK		0x000007000
+# define A2W_PLL_CTRL_PDIV_SHIFT	12
+# define A2W_PLL_CTRL_NDIV_MASK		0x0000003ff
+# define A2W_PLL_CTRL_NDIV_SHIFT	0
+
+#define A2W_PLLA_ANA0		0x1010
+#define A2W_PLLC_ANA0		0x1030
+#define A2W_PLLD_ANA0		0x1050
+#define A2W_PLLH_ANA0		0x1070
+#define A2W_PLLB_ANA0		0x10f0
+
+#define A2W_PLL_KA_SHIFT	7
+#define A2W_PLL_KA_MASK		GENMASK(9, 7)
+#define A2W_PLL_KI_SHIFT	19
+#define A2W_PLL_KI_MASK		GENMASK(21, 19)
+#define A2W_PLL_KP_SHIFT	15
+#define A2W_PLL_KP_MASK		GENMASK(18, 15)
+
+#define A2W_PLLH_KA_SHIFT	19
+#define A2W_PLLH_KA_MASK	GENMASK(21, 19)
+#define A2W_PLLH_KI_LOW_SHIFT	22
+#define A2W_PLLH_KI_LOW_MASK	GENMASK(23, 22)
+#define A2W_PLLH_KI_HIGH_SHIFT	0
+#define A2W_PLLH_KI_HIGH_MASK	GENMASK(0, 0)
+#define A2W_PLLH_KP_SHIFT	1
+#define A2W_PLLH_KP_MASK	GENMASK(4, 1)
+
+#define A2W_XOSC_CTRL		0x1190
+# define A2W_XOSC_CTRL_PLLB_ENABLE	BIT(7)
+# define A2W_XOSC_CTRL_PLLA_ENABLE	BIT(6)
+# define A2W_XOSC_CTRL_PLLD_ENABLE	BIT(5)
+# define A2W_XOSC_CTRL_DDR_ENABLE	BIT(4)
+# define A2W_XOSC_CTRL_CPR1_ENABLE	BIT(3)
+# define A2W_XOSC_CTRL_USB_ENABLE	BIT(2)
+# define A2W_XOSC_CTRL_HDMI_ENABLE	BIT(1)
+# define A2W_XOSC_CTRL_PLLC_ENABLE	BIT(0)
+
+#define A2W_PLLA_FRAC		0x1200
+#define A2W_PLLC_FRAC		0x1220
+#define A2W_PLLD_FRAC		0x1240
+#define A2W_PLLH_FRAC		0x1260
+#define A2W_PLLB_FRAC		0x12e0
+# define A2W_PLL_FRAC_MASK		((1 << A2W_PLL_FRAC_BITS) - 1)
+# define A2W_PLL_FRAC_BITS		20
+
+#define A2W_PLL_CHANNEL_DISABLE		BIT(8)
+#define A2W_PLL_DIV_BITS		8
+#define A2W_PLL_DIV_SHIFT		0
+
+#define A2W_PLLA_DSI0		0x1300
+#define A2W_PLLA_CORE		0x1400
+#define A2W_PLLA_PER		0x1500
+#define A2W_PLLA_CCP2		0x1600
+
+#define A2W_PLLC_CORE2		0x1320
+#define A2W_PLLC_CORE1		0x1420
+#define A2W_PLLC_PER		0x1520
+#define A2W_PLLC_CORE0		0x1620
+
+#define A2W_PLLD_DSI0		0x1340
+#define A2W_PLLD_CORE		0x1440
+#define A2W_PLLD_PER		0x1540
+#define A2W_PLLD_DSI1		0x1640
+
+#define A2W_PLLH_AUX		0x1360
+#define A2W_PLLH_RCAL		0x1460
+#define A2W_PLLH_PIX		0x1560
+#define A2W_PLLH_STS		0x1660
+
+#define A2W_PLLH_CTRLR		0x1960
+#define A2W_PLLH_FRACR		0x1a60
+#define A2W_PLLH_AUXR		0x1b60
+#define A2W_PLLH_RCALR		0x1c60
+#define A2W_PLLH_PIXR		0x1d60
+#define A2W_PLLH_STSR		0x1e60
+
+#define A2W_PLLB_ARM		0x13e0
+#define A2W_PLLB_SP0		0x14e0
+#define A2W_PLLB_SP1		0x15e0
+#define A2W_PLLB_SP2		0x16e0
+
+#define LOCK_TIMEOUT_NS		100000000
+#define BCM2835_MAX_FB_RATE	1750000000u
+
+struct bcm2835_cprman {
+	struct device *dev;
+	void __iomem *regs;
+	spinlock_t regs_lock;
+	const char *osc_name;
+
+	struct clk_onecell_data onecell;
+	struct clk *clks[BCM2835_CLOCK_COUNT];
+};
+
+static inline void cprman_write(struct bcm2835_cprman *cprman, u32 reg, u32 val)
+{
+	writel(CM_PASSWORD | val, cprman->regs + reg);
+}
+
+static inline u32 cprman_read(struct bcm2835_cprman *cprman, u32 reg)
+{
+	return readl(cprman->regs + reg);
+}
+
+/*
+ * These are fixed clocks. They're probably not all root clocks and it may
+ * be possible to turn them on and off but until this is mapped out better
+ * it's the only way they can be used.
+ */
+void __init bcm2835_init_clocks(void)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT,
+					126000000);
+	if (IS_ERR(clk))
+		pr_err("apb_pclk not registered\n");
+
+	clk = clk_register_fixed_rate(NULL, "uart0_pclk", NULL, CLK_IS_ROOT,
+					3000000);
+	if (IS_ERR(clk))
+		pr_err("uart0_pclk not registered\n");
+	ret = clk_register_clkdev(clk, NULL, "20201000.uart");
+	if (ret)
+		pr_err("uart0_pclk alias not registered\n");
+
+	clk = clk_register_fixed_rate(NULL, "uart1_pclk", NULL, CLK_IS_ROOT,
+					125000000);
+	if (IS_ERR(clk))
+		pr_err("uart1_pclk not registered\n");
+	ret = clk_register_clkdev(clk, NULL, "20215000.uart");
+	if (ret)
+		pr_err("uart1_pclk alias not registered\n");
+}
+
+struct bcm2835_pll_data {
+	const char *name;
+	u32 cm_ctrl_reg;
+	u32 a2w_ctrl_reg;
+	u32 frac_reg;
+	u32 ana_reg_base;
+	u32 reference_enable_mask;
+	/* Bit in CM_LOCK to indicate when the PLL has locked. */
+	u32 lock_mask;
+
+	const struct bcm2835_pll_ana_bits *ana;
+
+	unsigned long min_rate;
+	unsigned long max_rate;
+	/*
+	 * Highest rate for the VCO before we have to use the
+	 * pre-divide-by-2.
+	 */
+	unsigned long max_fb_rate;
+};
+
+struct bcm2835_pll_ana_bits {
+	u32 mask0;
+	u32 set0;
+	u32 mask1;
+	u32 set1;
+	u32 mask3;
+	u32 set3;
+	u32 fb_prediv_mask;
+};
+
+static const struct bcm2835_pll_ana_bits bcm2835_ana_default = {
+	.mask0 = 0,
+	.set0 = 0,
+	.mask1 = ~(A2W_PLL_KI_MASK | A2W_PLL_KP_MASK),
+	.set1 = (2 << A2W_PLL_KI_SHIFT) | (8 << A2W_PLL_KP_SHIFT),
+	.mask3 = ~A2W_PLL_KA_MASK,
+	.set3 = (2 << A2W_PLL_KA_SHIFT),
+	.fb_prediv_mask = BIT(14),
+};
+
+static const struct bcm2835_pll_ana_bits bcm2835_ana_pllh = {
+	.mask0 = ~(A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK),
+	.set0 = (2 << A2W_PLLH_KA_SHIFT) | (2 << A2W_PLLH_KI_LOW_SHIFT),
+	.mask1 = ~(A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK),
+	.set1 = (6 << A2W_PLLH_KP_SHIFT),
+	.mask3 = 0,
+	.set3 = 0,
+	.fb_prediv_mask = BIT(11),
+};
+
+/*
+ * PLLA is the auxiliary PLL, used to drive the CCP2 (Compact Camera
+ * Port 2) transmitter clock.
+ *
+ * It is in the PX LDO power domain, which is on when the AUDIO domain
+ * is on.
+ */
+static const struct bcm2835_pll_data bcm2835_plla_data = {
+	.name = "plla",
+	.cm_ctrl_reg = CM_PLLA,
+	.a2w_ctrl_reg = A2W_PLLA_CTRL,
+	.frac_reg = A2W_PLLA_FRAC,
+	.ana_reg_base = A2W_PLLA_ANA0,
+	.reference_enable_mask = A2W_XOSC_CTRL_PLLA_ENABLE,
+	.lock_mask = CM_LOCK_FLOCKA,
+
+	.ana = &bcm2835_ana_default,
+
+	.min_rate = 600000000u,
+	.max_rate = 2400000000u,
+	.max_fb_rate = BCM2835_MAX_FB_RATE,
+};
+
+/* PLLB is used for the ARM's clock. */
+static const struct bcm2835_pll_data bcm2835_pllb_data = {
+	.name = "pllb",
+	.cm_ctrl_reg = CM_PLLB,
+	.a2w_ctrl_reg = A2W_PLLB_CTRL,
+	.frac_reg = A2W_PLLB_FRAC,
+	.ana_reg_base = A2W_PLLB_ANA0,
+	.reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE,
+	.lock_mask = CM_LOCK_FLOCKB,
+
+	.ana = &bcm2835_ana_default,
+
+	.min_rate = 600000000u,
+	.max_rate = 3000000000u,
+	.max_fb_rate = BCM2835_MAX_FB_RATE,
+};
+
+/*
+ * PLLC is the core PLL, used to drive the core VPU clock.
+ *
+ * It is in the PX LDO power domain, which is on when the AUDIO domain
+ * is on.
+*/
+static const struct bcm2835_pll_data bcm2835_pllc_data = {
+	.name = "pllc",
+	.cm_ctrl_reg = CM_PLLC,
+	.a2w_ctrl_reg = A2W_PLLC_CTRL,
+	.frac_reg = A2W_PLLC_FRAC,
+	.ana_reg_base = A2W_PLLC_ANA0,
+	.reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
+	.lock_mask = CM_LOCK_FLOCKC,
+
+	.ana = &bcm2835_ana_default,
+
+	.min_rate = 600000000u,
+	.max_rate = 3000000000u,
+	.max_fb_rate = BCM2835_MAX_FB_RATE,
+};
+
+/*
+ * PLLD is the display PLL, used to drive DSI display panels.
+ *
+ * It is in the PX LDO power domain, which is on when the AUDIO domain
+ * is on.
+ */
+static const struct bcm2835_pll_data bcm2835_plld_data = {
+	.name = "plld",
+	.cm_ctrl_reg = CM_PLLD,
+	.a2w_ctrl_reg = A2W_PLLD_CTRL,
+	.frac_reg = A2W_PLLD_FRAC,
+	.ana_reg_base = A2W_PLLD_ANA0,
+	.reference_enable_mask = A2W_XOSC_CTRL_DDR_ENABLE,
+	.lock_mask = CM_LOCK_FLOCKD,
+
+	.ana = &bcm2835_ana_default,
+
+	.min_rate = 600000000u,
+	.max_rate = 2400000000u,
+	.max_fb_rate = BCM2835_MAX_FB_RATE,
+};
+
+/*
+ * PLLH is used to supply the pixel clock or the AUX clock for the TV
+ * encoder.
+ *
+ * It is in the HDMI power domain.
+ */
+static const struct bcm2835_pll_data bcm2835_pllh_data = {
+	"pllh",
+	.cm_ctrl_reg = CM_PLLH,
+	.a2w_ctrl_reg = A2W_PLLH_CTRL,
+	.frac_reg = A2W_PLLH_FRAC,
+	.ana_reg_base = A2W_PLLH_ANA0,
+	.reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
+	.lock_mask = CM_LOCK_FLOCKH,
+
+	.ana = &bcm2835_ana_pllh,
+
+	.min_rate = 600000000u,
+	.max_rate = 3000000000u,
+	.max_fb_rate = BCM2835_MAX_FB_RATE,
+};
+
+struct bcm2835_pll_divider_data {
+	const char *name;
+	const struct bcm2835_pll_data *source_pll;
+	u32 cm_reg;
+	u32 a2w_reg;
+
+	u32 load_mask;
+	u32 hold_mask;
+	u32 fixed_divider;
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_plla_core_data = {
+	.name = "plla_core",
+	.source_pll = &bcm2835_plla_data,
+	.cm_reg = CM_PLLA,
+	.a2w_reg = A2W_PLLA_CORE,
+	.load_mask = CM_PLLA_LOADCORE,
+	.hold_mask = CM_PLLA_HOLDCORE,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_plla_per_data = {
+	.name = "plla_per",
+	.source_pll = &bcm2835_plla_data,
+	.cm_reg = CM_PLLA,
+	.a2w_reg = A2W_PLLA_PER,
+	.load_mask = CM_PLLA_LOADPER,
+	.hold_mask = CM_PLLA_HOLDPER,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllb_arm_data = {
+	.name = "pllb_arm",
+	.source_pll = &bcm2835_pllb_data,
+	.cm_reg = CM_PLLB,
+	.a2w_reg = A2W_PLLB_ARM,
+	.load_mask = CM_PLLB_LOADARM,
+	.hold_mask = CM_PLLB_HOLDARM,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllc_core0_data = {
+	.name = "pllc_core0",
+	.source_pll = &bcm2835_pllc_data,
+	.cm_reg = CM_PLLC,
+	.a2w_reg = A2W_PLLC_CORE0,
+	.load_mask = CM_PLLC_LOADCORE0,
+	.hold_mask = CM_PLLC_HOLDCORE0,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllc_core1_data = {
+	.name = "pllc_core1", .source_pll = &bcm2835_pllc_data,
+	.cm_reg = CM_PLLC, A2W_PLLC_CORE1,
+	.load_mask = CM_PLLC_LOADCORE1,
+	.hold_mask = CM_PLLC_HOLDCORE1,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllc_core2_data = {
+	.name = "pllc_core2",
+	.source_pll = &bcm2835_pllc_data,
+	.cm_reg = CM_PLLC,
+	.a2w_reg = A2W_PLLC_CORE2,
+	.load_mask = CM_PLLC_LOADCORE2,
+	.hold_mask = CM_PLLC_HOLDCORE2,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllc_per_data = {
+	.name = "pllc_per",
+	.source_pll = &bcm2835_pllc_data,
+	.cm_reg = CM_PLLC,
+	.a2w_reg = A2W_PLLC_PER,
+	.load_mask = CM_PLLC_LOADPER,
+	.hold_mask = CM_PLLC_HOLDPER,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_plld_core_data = {
+	.name = "plld_core",
+	.source_pll = &bcm2835_plld_data,
+	.cm_reg = CM_PLLD,
+	.a2w_reg = A2W_PLLD_CORE,
+	.load_mask = CM_PLLD_LOADCORE,
+	.hold_mask = CM_PLLD_HOLDCORE,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_plld_per_data = {
+	.name = "plld_per",
+	.source_pll = &bcm2835_plld_data,
+	.cm_reg = CM_PLLD,
+	.a2w_reg = A2W_PLLD_PER,
+	.load_mask = CM_PLLD_LOADPER,
+	.hold_mask = CM_PLLD_HOLDPER,
+	.fixed_divider = 1,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllh_rcal_data = {
+	.name = "pllh_rcal",
+	.source_pll = &bcm2835_pllh_data,
+	.cm_reg = CM_PLLH,
+	.a2w_reg = A2W_PLLH_RCAL,
+	.load_mask = CM_PLLH_LOADRCAL,
+	.hold_mask = 0,
+	.fixed_divider = 10,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllh_aux_data = {
+	.name = "pllh_aux",
+	.source_pll = &bcm2835_pllh_data,
+	.cm_reg = CM_PLLH,
+	.a2w_reg = A2W_PLLH_AUX,
+	.load_mask = CM_PLLH_LOADAUX,
+	.hold_mask = 0,
+	.fixed_divider = 10,
+};
+
+static const struct bcm2835_pll_divider_data bcm2835_pllh_pix_data = {
+	.name = "pllh_pix",
+	.source_pll = &bcm2835_pllh_data,
+	.cm_reg = CM_PLLH,
+	.a2w_reg = A2W_PLLH_PIX,
+	.load_mask = CM_PLLH_LOADPIX,
+	.hold_mask = 0,
+	.fixed_divider = 10,
+};
+
+struct bcm2835_clock_data {
+	const char *name;
+
+	const char *const *parents;
+	int num_mux_parents;
+
+	u32 ctl_reg;
+	u32 div_reg;
+
+	/* Number of integer bits in the divider */
+	u32 int_bits;
+	/* Number of fractional bits in the divider */
+	u32 frac_bits;
+
+	bool is_vpu_clock;
+};
+
+static const char *const bcm2835_clock_per_parents[] = {
+	"gnd",
+	"xosc",
+	"testdebug0",
+	"testdebug1",
+	"plla_per",
+	"pllc_per",
+	"plld_per",
+	"pllh_aux",
+};
+
+static const char *const bcm2835_clock_vpu_parents[] = {
+	"gnd",
+	"xosc",
+	"testdebug0",
+	"testdebug1",
+	"plla_core",
+	"pllc_core0",
+	"plld_core",
+	"pllh_aux",
+	"pllc_core1",
+	"pllc_core2",
+};
+
+static const char *const bcm2835_clock_osc_parents[] = {
+	"gnd",
+	"xosc",
+	"testdebug0",
+	"testdebug1"
+};
+
+/*
+ * Used for a 1Mhz clock for the system clocksource, and also used by
+ * the watchdog timer and the camera pulse generator.
+ */
+static const struct bcm2835_clock_data bcm2835_clock_timer_data = {
+	.name = "timer",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
+	.parents = bcm2835_clock_osc_parents,
+	.ctl_reg = CM_TIMERCTL,
+	.div_reg = CM_TIMERDIV,
+	.int_bits = 6,
+	.frac_bits = 12,
+};
+
+/* One Time Programmable Memory clock.  Maximum 10Mhz. */
+static const struct bcm2835_clock_data bcm2835_clock_otp_data = {
+	.name = "otp",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
+	.parents = bcm2835_clock_osc_parents,
+	.ctl_reg = CM_OTPCTL,
+	.div_reg = CM_OTPDIV,
+	.int_bits = 4,
+	.frac_bits = 0,
+};
+
+/*
+ * VPU clock.  This doesn't have an enable bit, since it drives the
+ * bus for everything else, and is special so it doesn't need to be
+ * gated for rate changes.  It is also known as "clk_audio" in various
+ * hardware documentation.
+ */
+static const struct bcm2835_clock_data bcm2835_clock_vpu_data = {
+	.name = "vpu",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+	.parents = bcm2835_clock_vpu_parents,
+	.ctl_reg = CM_VPUCTL,
+	.div_reg = CM_VPUDIV,
+	.int_bits = 12,
+	.frac_bits = 8,
+	.is_vpu_clock = true,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_v3d_data = {
+	.name = "v3d",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+	.parents = bcm2835_clock_vpu_parents,
+	.ctl_reg = CM_V3DCTL,
+	.div_reg = CM_V3DDIV,
+	.int_bits = 4,
+	.frac_bits = 8,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_isp_data = {
+	.name = "isp",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+	.parents = bcm2835_clock_vpu_parents,
+	.ctl_reg = CM_ISPCTL,
+	.div_reg = CM_ISPDIV,
+	.int_bits = 4,
+	.frac_bits = 8,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_h264_data = {
+	.name = "h264",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+	.parents = bcm2835_clock_vpu_parents,
+	.ctl_reg = CM_H264CTL,
+	.div_reg = CM_H264DIV,
+	.int_bits = 4,
+	.frac_bits = 8,
+};
+
+/* TV encoder clock.  Only operating frequency is 108Mhz.  */
+static const struct bcm2835_clock_data bcm2835_clock_vec_data = {
+	.name = "vec",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_VECCTL,
+	.div_reg = CM_VECDIV,
+	.int_bits = 4,
+	.frac_bits = 0,
+};
+
+static const struct bcm2835_clock_data bcm2835_clock_uart_data = {
+	.name = "uart",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_UARTCTL,
+	.div_reg = CM_UARTDIV,
+	.int_bits = 10,
+	.frac_bits = 12,
+};
+
+/* HDMI state machine */
+static const struct bcm2835_clock_data bcm2835_clock_hsm_data = {
+	.name = "hsm",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_HSMCTL,
+	.div_reg = CM_HSMDIV,
+	.int_bits = 4,
+	.frac_bits = 8,
+};
+
+/*
+ * Secondary SDRAM clock.  Used for low-voltage modes when the PLL in
+ * the SDRAM controller can't be used.
+ */
+static const struct bcm2835_clock_data bcm2835_clock_sdram_data = {
+	.name = "sdram",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),
+	.parents = bcm2835_clock_vpu_parents,
+	.ctl_reg = CM_SDCCTL,
+	.div_reg = CM_SDCDIV,
+	.int_bits = 6,
+	.frac_bits = 0,
+};
+
+/* Clock for the temperature sensor.  Generally run at 2Mhz, max 5Mhz. */
+static const struct bcm2835_clock_data bcm2835_clock_tsens_data = {
+	.name = "tsens",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),
+	.parents = bcm2835_clock_osc_parents,
+	.ctl_reg = CM_TSENSCTL,
+	.div_reg = CM_TSENSDIV,
+	.int_bits = 5,
+	.frac_bits = 0,
+};
+
+/* Arasan EMMC clock */
+static const struct bcm2835_clock_data bcm2835_clock_emmc_data = {
+	.name = "emmc",
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),
+	.parents = bcm2835_clock_per_parents,
+	.ctl_reg = CM_EMMCCTL,
+	.div_reg = CM_EMMCDIV,
+	.int_bits = 4,
+	.frac_bits = 8,
+};
+
+struct bcm2835_pll {
+	struct clk_hw hw;
+	struct bcm2835_cprman *cprman;
+	const struct bcm2835_pll_data *data;
+};
+
+static int bcm2835_pll_is_on(struct clk_hw *hw)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+
+	return cprman_read(cprman, data->a2w_ctrl_reg) &
+		A2W_PLL_CTRL_PRST_DISABLE;
+}
+
+static void bcm2835_pll_choose_ndiv_and_fdiv(unsigned long rate,
+					     unsigned long parent_rate,
+					     u32 *ndiv, u32 *fdiv)
+{
+	u64 div;
+
+	div = (u64)rate << A2W_PLL_FRAC_BITS;
+	do_div(div, parent_rate);
+
+	*ndiv = div >> A2W_PLL_FRAC_BITS;
+	*fdiv = div & ((1 << A2W_PLL_FRAC_BITS) - 1);
+}
+
+static long bcm2835_pll_rate_from_divisors(unsigned long parent_rate,
+					   u32 ndiv, u32 fdiv, u32 pdiv)
+{
+	u64 rate;
+
+	if (pdiv == 0)
+		return 0;
+
+	rate = (u64)parent_rate * ((ndiv << A2W_PLL_FRAC_BITS) + fdiv);
+	do_div(rate, pdiv);
+	return rate >> A2W_PLL_FRAC_BITS;
+}
+
+static long bcm2835_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *parent_rate)
+{
+	u32 ndiv, fdiv;
+
+	bcm2835_pll_choose_ndiv_and_fdiv(rate, *parent_rate, &ndiv, &fdiv);
+
+	return bcm2835_pll_rate_from_divisors(*parent_rate, ndiv, fdiv, 1);
+}
+
+static unsigned long bcm2835_pll_get_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+	u32 a2wctrl = cprman_read(cprman, data->a2w_ctrl_reg);
+	u32 ndiv, pdiv, fdiv;
+	bool using_prediv;
+
+	if (parent_rate == 0)
+		return 0;
+
+	fdiv = cprman_read(cprman, data->frac_reg) & A2W_PLL_FRAC_MASK;
+	ndiv = (a2wctrl & A2W_PLL_CTRL_NDIV_MASK) >> A2W_PLL_CTRL_NDIV_SHIFT;
+	pdiv = (a2wctrl & A2W_PLL_CTRL_PDIV_MASK) >> A2W_PLL_CTRL_PDIV_SHIFT;
+	using_prediv = cprman_read(cprman, data->ana_reg_base + 4) &
+		data->ana->fb_prediv_mask;
+
+	if (using_prediv)
+		ndiv *= 2;
+
+	return bcm2835_pll_rate_from_divisors(parent_rate, ndiv, fdiv, pdiv);
+}
+
+static void bcm2835_pll_off(struct clk_hw *hw)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+
+	cprman_write(cprman, data->cm_ctrl_reg, CM_PLL_ANARST);
+	cprman_write(cprman, data->a2w_ctrl_reg, A2W_PLL_CTRL_PWRDN);
+}
+
+static int bcm2835_pll_on(struct clk_hw *hw)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+	ktime_t timeout;
+
+	/* Take the PLL out of reset. */
+	cprman_write(cprman, data->cm_ctrl_reg,
+		     cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST);
+
+	/* Wait for the PLL to lock. */
+	timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
+	while (!(cprman_read(cprman, CM_LOCK) & data->lock_mask)) {
+		if (ktime_after(ktime_get(), timeout)) {
+			dev_err(cprman->dev, "%s: couldn't lock PLL\n",
+				clk_hw_get_name(hw));
+			return -ETIMEDOUT;
+		}
+
+		cpu_relax();
+	}
+
+	return 0;
+}
+
+static void
+bcm2835_pll_write_ana(struct bcm2835_cprman *cprman, u32 ana_reg_base, u32 *ana)
+{
+	int i;
+
+	/*
+	 * ANA register setup is done as a series of writes to
+	 * ANA3-ANA0, in that order.  This lets us write all 4
+	 * registers as a single cycle of the serdes interface (taking
+	 * 100 xosc clocks), whereas if we were to update ana0, 1, and
+	 * 3 individually through their partial-write registers, each
+	 * would be their own serdes cycle.
+	 */
+	for (i = 3; i >= 0; i--)
+		cprman_write(cprman, ana_reg_base + i * 4, ana[i]);
+}
+
+static int bcm2835_pll_set_rate(struct clk_hw *hw,
+				unsigned long rate, unsigned long parent_rate)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+	bool was_using_prediv, use_fb_prediv, do_ana_setup_first;
+	u32 ndiv, fdiv, a2w_ctl;
+	u32 ana[4];
+	int i;
+
+	if (rate < data->min_rate || rate > data->max_rate) {
+		dev_err(cprman->dev, "%s: rate out of spec: %lu vs (%lu, %lu)\n",
+			clk_hw_get_name(hw), rate,
+			data->min_rate, data->max_rate);
+		return -EINVAL;
+	}
+
+	if (rate > data->max_fb_rate) {
+		use_fb_prediv = true;
+		rate /= 2;
+	} else {
+		use_fb_prediv = false;
+	}
+
+	bcm2835_pll_choose_ndiv_and_fdiv(rate, parent_rate, &ndiv, &fdiv);
+
+	for (i = 3; i >= 0; i--)
+		ana[i] = cprman_read(cprman, data->ana_reg_base + i * 4);
+
+	was_using_prediv = ana[1] & data->ana->fb_prediv_mask;
+
+	ana[0] &= ~data->ana->mask0;
+	ana[0] |= data->ana->set0;
+	ana[1] &= ~data->ana->mask1;
+	ana[1] |= data->ana->set1;
+	ana[3] &= ~data->ana->mask3;
+	ana[3] |= data->ana->set3;
+
+	if (was_using_prediv && !use_fb_prediv) {
+		ana[1] &= ~data->ana->fb_prediv_mask;
+		do_ana_setup_first = true;
+	} else if (!was_using_prediv && use_fb_prediv) {
+		ana[1] |= data->ana->fb_prediv_mask;
+		do_ana_setup_first = false;
+	} else {
+		do_ana_setup_first = true;
+	}
+
+	/* Unmask the reference clock from the oscillator. */
+	cprman_write(cprman, A2W_XOSC_CTRL,
+		     cprman_read(cprman, A2W_XOSC_CTRL) |
+		     data->reference_enable_mask);
+
+	if (do_ana_setup_first)
+		bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);
+
+	/* Set the PLL multiplier from the oscillator. */
+	cprman_write(cprman, data->frac_reg, fdiv);
+
+	a2w_ctl = cprman_read(cprman, data->a2w_ctrl_reg);
+	a2w_ctl &= ~A2W_PLL_CTRL_NDIV_MASK;
+	a2w_ctl |= ndiv << A2W_PLL_CTRL_NDIV_SHIFT;
+	a2w_ctl &= ~A2W_PLL_CTRL_PDIV_MASK;
+	a2w_ctl |= 1 << A2W_PLL_CTRL_PDIV_SHIFT;
+	cprman_write(cprman, data->a2w_ctrl_reg, a2w_ctl);
+
+	if (!do_ana_setup_first)
+		bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);
+
+	return 0;
+}
+
+static const struct clk_ops bcm2835_pll_clk_ops = {
+	.is_prepared = bcm2835_pll_is_on,
+	.prepare = bcm2835_pll_on,
+	.unprepare = bcm2835_pll_off,
+	.recalc_rate = bcm2835_pll_get_rate,
+	.set_rate = bcm2835_pll_set_rate,
+	.round_rate = bcm2835_pll_round_rate,
+};
+
+struct bcm2835_pll_divider {
+	struct clk_divider div;
+	struct bcm2835_cprman *cprman;
+	const struct bcm2835_pll_divider_data *data;
+};
+
+static struct bcm2835_pll_divider *
+bcm2835_pll_divider_from_hw(struct clk_hw *hw)
+{
+	return container_of(hw, struct bcm2835_pll_divider, div.hw);
+}
+
+static int bcm2835_pll_divider_is_on(struct clk_hw *hw)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+
+	return !(cprman_read(cprman, data->a2w_reg) & A2W_PLL_CHANNEL_DISABLE);
+}
+
+static long bcm2835_pll_divider_round_rate(struct clk_hw *hw,
+					   unsigned long rate,
+					   unsigned long *parent_rate)
+{
+	return clk_divider_ops.round_rate(hw, rate, parent_rate);
+}
+
+static unsigned long bcm2835_pll_divider_get_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+	u32 div = cprman_read(cprman, data->a2w_reg);
+
+	div &= (1 << A2W_PLL_DIV_BITS) - 1;
+	if (div == 0)
+		div = 256;
+
+	return parent_rate / div;
+}
+
+static void bcm2835_pll_divider_off(struct clk_hw *hw)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+
+	cprman_write(cprman, data->cm_reg,
+		     (cprman_read(cprman, data->cm_reg) &
+		      ~data->load_mask) | data->hold_mask);
+	cprman_write(cprman, data->a2w_reg, A2W_PLL_CHANNEL_DISABLE);
+}
+
+static int bcm2835_pll_divider_on(struct clk_hw *hw)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+
+	cprman_write(cprman, data->a2w_reg,
+		     cprman_read(cprman, data->a2w_reg) &
+		     ~A2W_PLL_CHANNEL_DISABLE);
+
+	cprman_write(cprman, data->cm_reg,
+		     cprman_read(cprman, data->cm_reg) & ~data->hold_mask);
+
+	return 0;
+}
+
+static int bcm2835_pll_divider_set_rate(struct clk_hw *hw,
+					unsigned long rate,
+					unsigned long parent_rate)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+	u32 cm;
+	int ret;
+
+	ret = clk_divider_ops.set_rate(hw, rate, parent_rate);
+	if (ret)
+		return ret;
+
+	cm = cprman_read(cprman, data->cm_reg);
+	cprman_write(cprman, data->cm_reg, cm | data->load_mask);
+	cprman_write(cprman, data->cm_reg, cm & ~data->load_mask);
+
+	return 0;
+}
+
+static const struct clk_ops bcm2835_pll_divider_clk_ops = {
+	.is_prepared = bcm2835_pll_divider_is_on,
+	.prepare = bcm2835_pll_divider_on,
+	.unprepare = bcm2835_pll_divider_off,
+	.recalc_rate = bcm2835_pll_divider_get_rate,
+	.set_rate = bcm2835_pll_divider_set_rate,
+	.round_rate = bcm2835_pll_divider_round_rate,
+};
+
+/*
+ * The CM dividers do fixed-point division, so we can't use the
+ * generic integer divider code like the PLL dividers do (and we can't
+ * fake it by having some fixed shifts preceding it in the clock tree,
+ * because we'd run out of bits in a 32-bit unsigned long).
+ */
+struct bcm2835_clock {
+	struct clk_hw hw;
+	struct bcm2835_cprman *cprman;
+	const struct bcm2835_clock_data *data;
+};
+
+static struct bcm2835_clock *bcm2835_clock_from_hw(struct clk_hw *hw)
+{
+	return container_of(hw, struct bcm2835_clock, hw);
+}
+
+static int bcm2835_clock_is_on(struct clk_hw *hw)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+
+	return (cprman_read(cprman, data->ctl_reg) & CM_ENABLE) != 0;
+}
+
+static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
+				    unsigned long rate,
+				    unsigned long parent_rate)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	const struct bcm2835_clock_data *data = clock->data;
+	u32 unused_frac_mask = GENMASK(CM_DIV_FRAC_BITS - data->frac_bits, 0);
+	u64 temp = (u64)parent_rate << CM_DIV_FRAC_BITS;
+	u32 div;
+
+	do_div(temp, rate);
+	div = temp;
+
+	/* Round and mask off the unused bits */
+	if (unused_frac_mask != 0) {
+		div += unused_frac_mask >> 1;
+		div &= ~unused_frac_mask;
+	}
+
+	/* Clamp to the limits. */
+	div = max(div, unused_frac_mask + 1);
+	div = min_t(u32, div, GENMASK(data->int_bits + CM_DIV_FRAC_BITS - 1,
+				      CM_DIV_FRAC_BITS - data->frac_bits));
+
+	return div;
+}
+
+static long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
+					    unsigned long parent_rate,
+					    u32 div)
+{
+	const struct bcm2835_clock_data *data = clock->data;
+	u64 temp;
+
+	/*
+	 * The divisor is a 12.12 fixed point field, but only some of
+	 * the bits are populated in any given clock.
+	 */
+	div >>= CM_DIV_FRAC_BITS - data->frac_bits;
+	div &= (1 << (data->int_bits + data->frac_bits)) - 1;
+
+	if (div == 0)
+		return 0;
+
+	temp = (u64)parent_rate << data->frac_bits;
+
+	do_div(temp, div);
+
+	return temp;
+}
+
+static long bcm2835_clock_round_rate(struct clk_hw *hw,
+				     unsigned long rate,
+				     unsigned long *parent_rate)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	u32 div = bcm2835_clock_choose_div(hw, rate, *parent_rate);
+
+	return bcm2835_clock_rate_from_divisor(clock, *parent_rate, div);
+}
+
+static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	u32 div = cprman_read(cprman, data->div_reg);
+
+	return bcm2835_clock_rate_from_divisor(clock, parent_rate, div);
+}
+
+static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock)
+{
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	ktime_t timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
+
+	while (cprman_read(cprman, data->ctl_reg) & CM_BUSY) {
+		if (ktime_after(ktime_get(), timeout)) {
+			dev_err(cprman->dev, "%s: couldn't lock PLL\n",
+				clk_hw_get_name(&clock->hw));
+			return;
+		}
+		cpu_relax();
+	}
+}
+
+static void bcm2835_clock_off(struct clk_hw *hw)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->ctl_reg,
+		     cprman_read(cprman, data->ctl_reg) & ~CM_ENABLE);
+	spin_unlock(&cprman->regs_lock);
+
+	/* BUSY will remain high until the divider completes its cycle. */
+	bcm2835_clock_wait_busy(clock);
+}
+
+static int bcm2835_clock_on(struct clk_hw *hw)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->ctl_reg,
+		     cprman_read(cprman, data->ctl_reg) |
+		     CM_ENABLE |
+		     CM_GATE);
+	spin_unlock(&cprman->regs_lock);
+
+	return 0;
+}
+
+static int bcm2835_clock_set_rate(struct clk_hw *hw,
+				  unsigned long rate, unsigned long parent_rate)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate);
+
+	cprman_write(cprman, data->div_reg, div);
+
+	return 0;
+}
+
+static const struct clk_ops bcm2835_clock_clk_ops = {
+	.is_prepared = bcm2835_clock_is_on,
+	.prepare = bcm2835_clock_on,
+	.unprepare = bcm2835_clock_off,
+	.recalc_rate = bcm2835_clock_get_rate,
+	.set_rate = bcm2835_clock_set_rate,
+	.round_rate = bcm2835_clock_round_rate,
+};
+
+static int bcm2835_vpu_clock_is_on(struct clk_hw *hw)
+{
+	return true;
+}
+
+/*
+ * The VPU clock can never be disabled (it doesn't have an ENABLE
+ * bit), so it gets its own set of clock ops.
+ */
+static const struct clk_ops bcm2835_vpu_clock_clk_ops = {
+	.is_prepared = bcm2835_vpu_clock_is_on,
+	.recalc_rate = bcm2835_clock_get_rate,
+	.set_rate = bcm2835_clock_set_rate,
+	.round_rate = bcm2835_clock_round_rate,
+};
+
+static struct clk *bcm2835_register_pll(struct bcm2835_cprman *cprman,
+					const struct bcm2835_pll_data *data)
+{
+	struct bcm2835_pll *pll;
+	struct clk_init_data init;
+
+	memset(&init, 0, sizeof(init));
+
+	/* All of the PLLs derive from the external oscillator. */
+	init.parent_names = &cprman->osc_name;
+	init.num_parents = 1;
+	init.name = data->name;
+	init.ops = &bcm2835_pll_clk_ops;
+	init.flags = CLK_IGNORE_UNUSED;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return NULL;
+
+	pll->cprman = cprman;
+	pll->data = data;
+	pll->hw.init = &init;
+
+	return devm_clk_register(cprman->dev, &pll->hw);
+}
+
+static struct clk *
+bcm2835_register_pll_divider(struct bcm2835_cprman *cprman,
+			     const struct bcm2835_pll_divider_data *data)
+{
+	struct bcm2835_pll_divider *divider;
+	struct clk_init_data init;
+	struct clk *clk;
+	const char *divider_name;
+
+	if (data->fixed_divider != 1) {
+		divider_name = devm_kasprintf(cprman->dev, GFP_KERNEL,
+					      "%s_prediv", data->name);
+		if (!divider_name)
+			return NULL;
+	} else {
+		divider_name = data->name;
+	}
+
+	memset(&init, 0, sizeof(init));
+
+	init.parent_names = &data->source_pll->name;
+	init.num_parents = 1;
+	init.name = divider_name;
+	init.ops = &bcm2835_pll_divider_clk_ops;
+	init.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED;
+
+	divider = devm_kzalloc(cprman->dev, sizeof(*divider), GFP_KERNEL);
+	if (!divider)
+		return NULL;
+
+	divider->div.reg = cprman->regs + data->a2w_reg;
+	divider->div.shift = A2W_PLL_DIV_SHIFT;
+	divider->div.width = A2W_PLL_DIV_BITS;
+	divider->div.flags = 0;
+	divider->div.lock = &cprman->regs_lock;
+	divider->div.hw.init = &init;
+	divider->div.table = NULL;
+
+	divider->cprman = cprman;
+	divider->data = data;
+
+	clk = devm_clk_register(cprman->dev, &divider->div.hw);
+	if (IS_ERR(clk))
+		return clk;
+
+	/*
+	 * PLLH's channels have a fixed divide by 10 afterwards, which
+	 * is what our consumers are actually using.
+	 */
+	if (data->fixed_divider != 1) {
+		return clk_register_fixed_factor(cprman->dev, data->name,
+						 divider_name,
+						 CLK_SET_RATE_PARENT,
+						 1,
+						 data->fixed_divider);
+	}
+
+	return clk;
+}
+
+static struct clk *bcm2835_register_clock(struct bcm2835_cprman *cprman,
+					  const struct bcm2835_clock_data *data)
+{
+	struct bcm2835_clock *clock;
+	struct clk_init_data init;
+	const char *parent;
+
+	/*
+	 * Most of the clock generators have a mux field, so we
+	 * instantiate a generic mux as our parent to handle it.
+	 */
+	if (data->num_mux_parents) {
+		const char *parents[1 << CM_SRC_BITS];
+		int i;
+
+		parent = devm_kasprintf(cprman->dev, GFP_KERNEL,
+					"mux_%s", data->name);
+		if (!parent)
+			return NULL;
+
+		/*
+		 * Replace our "xosc" references with the oscillator's
+		 * actual name.
+		 */
+		for (i = 0; i < data->num_mux_parents; i++) {
+			if (strcmp(data->parents[i], "xosc") == 0)
+				parents[i] = cprman->osc_name;
+			else
+				parents[i] = data->parents[i];
+		}
+
+		clk_register_mux(cprman->dev, parent,
+				 parents, data->num_mux_parents,
+				 CLK_SET_RATE_PARENT,
+				 cprman->regs + data->ctl_reg,
+				 CM_SRC_SHIFT, CM_SRC_BITS,
+				 0, &cprman->regs_lock);
+	} else {
+		parent = data->parents[0];
+	}
+
+	memset(&init, 0, sizeof(init));
+	init.parent_names = &parent;
+	init.num_parents = 1;
+	init.name = data->name;
+	init.flags = CLK_IGNORE_UNUSED;
+
+	if (data->is_vpu_clock) {
+		init.ops = &bcm2835_vpu_clock_clk_ops;
+	} else {
+		init.ops = &bcm2835_clock_clk_ops;
+		init.flags |= CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
+	}
+
+	clock = devm_kzalloc(cprman->dev, sizeof(*clock), GFP_KERNEL);
+	if (!clock)
+		return NULL;
+
+	clock->cprman = cprman;
+	clock->data = data;
+	clock->hw.init = &init;
+
+	return devm_clk_register(cprman->dev, &clock->hw);
+}
+
+static int bcm2835_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct clk **clks;
+	struct bcm2835_cprman *cprman;
+	struct resource *res;
+
+	cprman = devm_kzalloc(dev, sizeof(*cprman), GFP_KERNEL);
+	if (!cprman)
+		return -ENOMEM;
+
+	spin_lock_init(&cprman->regs_lock);
+	cprman->dev = dev;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	cprman->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(cprman->regs))
+		return PTR_ERR(cprman->regs);
+
+	cprman->osc_name = of_clk_get_parent_name(dev->of_node, 0);
+	if (!cprman->osc_name)
+		return -ENODEV;
+
+	platform_set_drvdata(pdev, cprman);
+
+	cprman->onecell.clk_num = BCM2835_CLOCK_COUNT;
+	cprman->onecell.clks = cprman->clks;
+	clks = cprman->clks;
+
+	clks[BCM2835_PLLA] = bcm2835_register_pll(cprman, &bcm2835_plla_data);
+	clks[BCM2835_PLLB] = bcm2835_register_pll(cprman, &bcm2835_pllb_data);
+	clks[BCM2835_PLLC] = bcm2835_register_pll(cprman, &bcm2835_pllc_data);
+	clks[BCM2835_PLLD] = bcm2835_register_pll(cprman, &bcm2835_plld_data);
+	clks[BCM2835_PLLH] = bcm2835_register_pll(cprman, &bcm2835_pllh_data);
+
+	clks[BCM2835_PLLA_CORE] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_plla_core_data);
+	clks[BCM2835_PLLA_PER] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_plla_per_data);
+	clks[BCM2835_PLLC_CORE0] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core0_data);
+	clks[BCM2835_PLLC_CORE1] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core1_data);
+	clks[BCM2835_PLLC_CORE2] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_pllc_core2_data);
+	clks[BCM2835_PLLC_PER] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_pllc_per_data);
+	clks[BCM2835_PLLD_CORE] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_plld_core_data);
+	clks[BCM2835_PLLD_PER] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_plld_per_data);
+	clks[BCM2835_PLLH_RCAL] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_pllh_rcal_data);
+	clks[BCM2835_PLLH_AUX] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_pllh_aux_data);
+	clks[BCM2835_PLLH_PIX] =
+		bcm2835_register_pll_divider(cprman, &bcm2835_pllh_pix_data);
+
+	clks[BCM2835_CLOCK_TIMER] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_timer_data);
+	clks[BCM2835_CLOCK_OTP] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_otp_data);
+	clks[BCM2835_CLOCK_TSENS] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_tsens_data);
+	clks[BCM2835_CLOCK_VPU] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_vpu_data);
+	clks[BCM2835_CLOCK_V3D] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_v3d_data);
+	clks[BCM2835_CLOCK_ISP] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_isp_data);
+	clks[BCM2835_CLOCK_H264] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_h264_data);
+	clks[BCM2835_CLOCK_V3D] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_v3d_data);
+	clks[BCM2835_CLOCK_SDRAM] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_sdram_data);
+	clks[BCM2835_CLOCK_UART] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_uart_data);
+	clks[BCM2835_CLOCK_VEC] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_vec_data);
+	clks[BCM2835_CLOCK_HSM] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_hsm_data);
+	clks[BCM2835_CLOCK_EMMC] =
+		bcm2835_register_clock(cprman, &bcm2835_clock_emmc_data);
+
+	/*
+	 * CM_PERIICTL (and CM_PERIACTL, CM_SYSCTL and CM_VPUCTL if
+	 * you have the debug bit set in the power manager, which we
+	 * don't bother exposing) are individual gates off of the
+	 * non-stop vpu clock.
+	 */
+	clks[BCM2835_CLOCK_PERI_IMAGE] =
+		clk_register_gate(dev, "peri_image", "vpu",
+				  CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE,
+				  cprman->regs + CM_PERIICTL, CM_GATE_BIT,
+				  0, &cprman->regs_lock);
+
+	return of_clk_add_provider(dev->of_node, of_clk_src_onecell_get,
+				   &cprman->onecell);
+}
+
+static const struct of_device_id bcm2835_clk_of_match[] = {
+	{ .compatible = "brcm,bcm2835-cprman", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, bcm2835_clk_of_match);
+
+static struct platform_driver bcm2835_clk_driver = {
+	.driver = {
+		.name = "bcm2835-clk",
+		.of_match_table = bcm2835_clk_of_match,
+	},
+	.probe          = bcm2835_clk_probe,
+};
+
+builtin_platform_driver(bcm2835_clk_driver);
+
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("BCM2835 clock driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/clk-bcm2835.c b/drivers/clk/clk-bcm2835.c
deleted file mode 100644
index dd295e498309..000000000000
--- a/drivers/clk/clk-bcm2835.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2010 Broadcom
- * Copyright (C) 2012 Stephen Warren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-#include <linux/clk/bcm2835.h>
-#include <linux/of.h>
-
-/*
- * These are fixed clocks. They're probably not all root clocks and it may
- * be possible to turn them on and off but until this is mapped out better
- * it's the only way they can be used.
- */
-void __init bcm2835_init_clocks(void)
-{
-	struct clk *clk;
-	int ret;
-
-	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT,
-					126000000);
-	if (IS_ERR(clk))
-		pr_err("apb_pclk not registered\n");
-
-	clk = clk_register_fixed_rate(NULL, "uart0_pclk", NULL, CLK_IS_ROOT,
-					3000000);
-	if (IS_ERR(clk))
-		pr_err("uart0_pclk not registered\n");
-	ret = clk_register_clkdev(clk, NULL, "20201000.uart");
-	if (ret)
-		pr_err("uart0_pclk alias not registered\n");
-
-	clk = clk_register_fixed_rate(NULL, "uart1_pclk", NULL, CLK_IS_ROOT,
-					125000000);
-	if (IS_ERR(clk))
-		pr_err("uart1_pclk not registered\n");
-	ret = clk_register_clkdev(clk, NULL, "20215000.uart");
-	if (ret)
-		pr_err("uart1_pclk alias not registered\n");
-}
diff --git a/include/dt-bindings/clock/bcm2835.h b/include/dt-bindings/clock/bcm2835.h
new file mode 100644
index 000000000000..d323efac7edf
--- /dev/null
+++ b/include/dt-bindings/clock/bcm2835.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define BCM2835_PLLA			0
+#define BCM2835_PLLB			1
+#define BCM2835_PLLC			2
+#define BCM2835_PLLD			3
+#define BCM2835_PLLH			4
+
+#define BCM2835_PLLA_CORE		5
+#define BCM2835_PLLA_PER		6
+#define BCM2835_PLLB_ARM		7
+#define BCM2835_PLLC_CORE0		8
+#define BCM2835_PLLC_CORE1		9
+#define BCM2835_PLLC_CORE2		10
+#define BCM2835_PLLC_PER		11
+#define BCM2835_PLLD_CORE		12
+#define BCM2835_PLLD_PER		13
+#define BCM2835_PLLH_RCAL		14
+#define BCM2835_PLLH_AUX		15
+#define BCM2835_PLLH_PIX		16
+
+#define BCM2835_CLOCK_TIMER		17
+#define BCM2835_CLOCK_OTP		18
+#define BCM2835_CLOCK_UART		19
+#define BCM2835_CLOCK_VPU		20
+#define BCM2835_CLOCK_V3D		21
+#define BCM2835_CLOCK_ISP		22
+#define BCM2835_CLOCK_H264		23
+#define BCM2835_CLOCK_VEC		24
+#define BCM2835_CLOCK_HSM		25
+#define BCM2835_CLOCK_SDRAM		26
+#define BCM2835_CLOCK_TSENS		27
+#define BCM2835_CLOCK_EMMC		28
+#define BCM2835_CLOCK_PERI_IMAGE	29
+
+#define BCM2835_CLOCK_COUNT		30