summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorKalle Valo <kvalo@qca.qualcomm.com>2011-11-11 12:17:33 +0200
committerKalle Valo <kvalo@qca.qualcomm.com>2011-11-13 12:34:29 +0200
commit66b693c3b84876d33afd35b9d717d8b9d07384c8 (patch)
treeef47e8bba54045d903dbe28d81eb30f78e127330
parentbd24a50fe66ef1f64a84a3d02e0f464bb394bb9b (diff)
downloadblackbird-op-linux-66b693c3b84876d33afd35b9d717d8b9d07384c8.tar.gz
blackbird-op-linux-66b693c3b84876d33afd35b9d717d8b9d07384c8.zip
ath6kl: move bmi calls to hif driver
In preparation for USB support which has it's own method for bmi. Based on code by Kevin Fang. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-rw-r--r--drivers/net/wireless/ath/ath6kl/bmi.c191
-rw-r--r--drivers/net/wireless/ath/ath6kl/hif-ops.h10
-rw-r--r--drivers/net/wireless/ath/ath6kl/hif.h2
-rw-r--r--drivers/net/wireless/ath/ath6kl/sdio.c162
4 files changed, 190 insertions, 175 deletions
diff --git a/drivers/net/wireless/ath/ath6kl/bmi.c b/drivers/net/wireless/ath/ath6kl/bmi.c
index a962fe4c6b7e..12f5b57d2dc2 100644
--- a/drivers/net/wireless/ath/ath6kl/bmi.c
+++ b/drivers/net/wireless/ath/ath6kl/bmi.c
@@ -19,165 +19,6 @@
#include "target.h"
#include "debug.h"
-static int ath6kl_get_bmi_cmd_credits(struct ath6kl *ar)
-{
- u32 addr;
- unsigned long timeout;
- int ret;
-
- ar->bmi.cmd_credits = 0;
-
- /* Read the counter register to get the command credits */
- addr = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4;
-
- timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);
- while (time_before(jiffies, timeout) && !ar->bmi.cmd_credits) {
-
- /*
- * Hit the credit counter with a 4-byte access, the first byte
- * read will hit the counter and cause a decrement, while the
- * remaining 3 bytes has no effect. The rationale behind this
- * is to make all HIF accesses 4-byte aligned.
- */
- ret = hif_read_write_sync(ar, addr,
- (u8 *)&ar->bmi.cmd_credits, 4,
- HIF_RD_SYNC_BYTE_INC);
- if (ret) {
- ath6kl_err("Unable to decrement the command credit count register: %d\n",
- ret);
- return ret;
- }
-
- /* The counter is only 8 bits.
- * Ignore anything in the upper 3 bytes
- */
- ar->bmi.cmd_credits &= 0xFF;
- }
-
- if (!ar->bmi.cmd_credits) {
- ath6kl_err("bmi communication timeout\n");
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
-static int ath6kl_bmi_get_rx_lkahd(struct ath6kl *ar)
-{
- unsigned long timeout;
- u32 rx_word = 0;
- int ret = 0;
-
- timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);
- while (time_before(jiffies, timeout) && !rx_word) {
- ret = hif_read_write_sync(ar, RX_LOOKAHEAD_VALID_ADDRESS,
- (u8 *)&rx_word, sizeof(rx_word),
- HIF_RD_SYNC_BYTE_INC);
- if (ret) {
- ath6kl_err("unable to read RX_LOOKAHEAD_VALID\n");
- return ret;
- }
-
- /* all we really want is one bit */
- rx_word &= (1 << ENDPOINT1);
- }
-
- if (!rx_word) {
- ath6kl_err("bmi_recv_buf FIFO empty\n");
- return -EINVAL;
- }
-
- return ret;
-}
-
-static int ath6kl_bmi_send_buf(struct ath6kl *ar, u8 *buf, u32 len)
-{
- int ret;
- u32 addr;
-
- ret = ath6kl_get_bmi_cmd_credits(ar);
- if (ret)
- return ret;
-
- addr = ar->mbox_info.htc_addr;
-
- ret = hif_read_write_sync(ar, addr, buf, len,
- HIF_WR_SYNC_BYTE_INC);
- if (ret)
- ath6kl_err("unable to send the bmi data to the device\n");
-
- return ret;
-}
-
-static int ath6kl_bmi_recv_buf(struct ath6kl *ar, u8 *buf, u32 len)
-{
- int ret;
- u32 addr;
-
- /*
- * During normal bootup, small reads may be required.
- * Rather than issue an HIF Read and then wait as the Target
- * adds successive bytes to the FIFO, we wait here until
- * we know that response data is available.
- *
- * This allows us to cleanly timeout on an unexpected
- * Target failure rather than risk problems at the HIF level.
- * In particular, this avoids SDIO timeouts and possibly garbage
- * data on some host controllers. And on an interconnect
- * such as Compact Flash (as well as some SDIO masters) which
- * does not provide any indication on data timeout, it avoids
- * a potential hang or garbage response.
- *
- * Synchronization is more difficult for reads larger than the
- * size of the MBOX FIFO (128B), because the Target is unable
- * to push the 129th byte of data until AFTER the Host posts an
- * HIF Read and removes some FIFO data. So for large reads the
- * Host proceeds to post an HIF Read BEFORE all the data is
- * actually available to read. Fortunately, large BMI reads do
- * not occur in practice -- they're supported for debug/development.
- *
- * So Host/Target BMI synchronization is divided into these cases:
- * CASE 1: length < 4
- * Should not happen
- *
- * CASE 2: 4 <= length <= 128
- * Wait for first 4 bytes to be in FIFO
- * If CONSERVATIVE_BMI_READ is enabled, also wait for
- * a BMI command credit, which indicates that the ENTIRE
- * response is available in the the FIFO
- *
- * CASE 3: length > 128
- * Wait for the first 4 bytes to be in FIFO
- *
- * For most uses, a small timeout should be sufficient and we will
- * usually see a response quickly; but there may be some unusual
- * (debug) cases of BMI_EXECUTE where we want an larger timeout.
- * For now, we use an unbounded busy loop while waiting for
- * BMI_EXECUTE.
- *
- * If BMI_EXECUTE ever needs to support longer-latency execution,
- * especially in production, this code needs to be enhanced to sleep
- * and yield. Also note that BMI_COMMUNICATION_TIMEOUT is currently
- * a function of Host processor speed.
- */
- if (len >= 4) { /* NB: Currently, always true */
- ret = ath6kl_bmi_get_rx_lkahd(ar);
- if (ret)
- return ret;
- }
-
- addr = ar->mbox_info.htc_addr;
- ret = hif_read_write_sync(ar, addr, buf, len,
- HIF_RD_SYNC_BYTE_INC);
- if (ret) {
- ath6kl_err("Unable to read the bmi data from the device: %d\n",
- ret);
- return ret;
- }
-
- return 0;
-}
-
int ath6kl_bmi_done(struct ath6kl *ar)
{
int ret;
@@ -190,7 +31,7 @@ int ath6kl_bmi_done(struct ath6kl *ar)
ar->bmi.done_sent = true;
- ret = ath6kl_bmi_send_buf(ar, (u8 *)&cid, sizeof(cid));
+ ret = ath6kl_hif_bmi_write(ar, (u8 *)&cid, sizeof(cid));
if (ret) {
ath6kl_err("Unable to send bmi done: %d\n", ret);
return ret;
@@ -210,13 +51,13 @@ int ath6kl_bmi_get_target_info(struct ath6kl *ar,
return -EACCES;
}
- ret = ath6kl_bmi_send_buf(ar, (u8 *)&cid, sizeof(cid));
+ ret = ath6kl_hif_bmi_write(ar, (u8 *)&cid, sizeof(cid));
if (ret) {
ath6kl_err("Unable to send get target info: %d\n", ret);
return ret;
}
- ret = ath6kl_bmi_recv_buf(ar, (u8 *)&targ_info->version,
+ ret = ath6kl_hif_bmi_read(ar, (u8 *)&targ_info->version,
sizeof(targ_info->version));
if (ret) {
ath6kl_err("Unable to recv target info: %d\n", ret);
@@ -225,7 +66,7 @@ int ath6kl_bmi_get_target_info(struct ath6kl *ar,
if (le32_to_cpu(targ_info->version) == TARGET_VERSION_SENTINAL) {
/* Determine how many bytes are in the Target's targ_info */
- ret = ath6kl_bmi_recv_buf(ar,
+ ret = ath6kl_hif_bmi_read(ar,
(u8 *)&targ_info->byte_count,
sizeof(targ_info->byte_count));
if (ret) {
@@ -244,7 +85,7 @@ int ath6kl_bmi_get_target_info(struct ath6kl *ar,
}
/* Read the remainder of the targ_info */
- ret = ath6kl_bmi_recv_buf(ar,
+ ret = ath6kl_hif_bmi_read(ar,
((u8 *)targ_info) +
sizeof(targ_info->byte_count),
sizeof(*targ_info) -
@@ -300,13 +141,13 @@ int ath6kl_bmi_read(struct ath6kl *ar, u32 addr, u8 *buf, u32 len)
memcpy(&(ar->bmi.cmd_buf[offset]), &rx_len, sizeof(rx_len));
offset += sizeof(len);
- ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+ ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset);
if (ret) {
ath6kl_err("Unable to write to the device: %d\n",
ret);
return ret;
}
- ret = ath6kl_bmi_recv_buf(ar, ar->bmi.cmd_buf, rx_len);
+ ret = ath6kl_hif_bmi_read(ar, ar->bmi.cmd_buf, rx_len);
if (ret) {
ath6kl_err("Unable to read from the device: %d\n",
ret);
@@ -371,7 +212,7 @@ int ath6kl_bmi_write(struct ath6kl *ar, u32 addr, u8 *buf, u32 len)
memcpy(&(ar->bmi.cmd_buf[offset]), src, tx_len);
offset += tx_len;
- ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+ ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset);
if (ret) {
ath6kl_err("Unable to write to the device: %d\n",
ret);
@@ -413,13 +254,13 @@ int ath6kl_bmi_execute(struct ath6kl *ar, u32 addr, u32 *param)
memcpy(&(ar->bmi.cmd_buf[offset]), param, sizeof(*param));
offset += sizeof(*param);
- ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+ ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset);
if (ret) {
ath6kl_err("Unable to write to the device: %d\n", ret);
return ret;
}
- ret = ath6kl_bmi_recv_buf(ar, ar->bmi.cmd_buf, sizeof(*param));
+ ret = ath6kl_hif_bmi_read(ar, ar->bmi.cmd_buf, sizeof(*param));
if (ret) {
ath6kl_err("Unable to read from the device: %d\n", ret);
return ret;
@@ -457,7 +298,7 @@ int ath6kl_bmi_set_app_start(struct ath6kl *ar, u32 addr)
memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));
offset += sizeof(addr);
- ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+ ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset);
if (ret) {
ath6kl_err("Unable to write to the device: %d\n", ret);
return ret;
@@ -493,13 +334,13 @@ int ath6kl_bmi_reg_read(struct ath6kl *ar, u32 addr, u32 *param)
memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));
offset += sizeof(addr);
- ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+ ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset);
if (ret) {
ath6kl_err("Unable to write to the device: %d\n", ret);
return ret;
}
- ret = ath6kl_bmi_recv_buf(ar, ar->bmi.cmd_buf, sizeof(*param));
+ ret = ath6kl_hif_bmi_read(ar, ar->bmi.cmd_buf, sizeof(*param));
if (ret) {
ath6kl_err("Unable to read from the device: %d\n", ret);
return ret;
@@ -540,7 +381,7 @@ int ath6kl_bmi_reg_write(struct ath6kl *ar, u32 addr, u32 param)
memcpy(&(ar->bmi.cmd_buf[offset]), &param, sizeof(param));
offset += sizeof(param);
- ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+ ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset);
if (ret) {
ath6kl_err("Unable to write to the device: %d\n", ret);
return ret;
@@ -587,7 +428,7 @@ int ath6kl_bmi_lz_data(struct ath6kl *ar, u8 *buf, u32 len)
tx_len);
offset += tx_len;
- ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+ ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset);
if (ret) {
ath6kl_err("Unable to write to the device: %d\n",
ret);
@@ -629,7 +470,7 @@ int ath6kl_bmi_lz_stream_start(struct ath6kl *ar, u32 addr)
memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));
offset += sizeof(addr);
- ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+ ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset);
if (ret) {
ath6kl_err("Unable to start LZ stream to the device: %d\n",
ret);
diff --git a/drivers/net/wireless/ath/ath6kl/hif-ops.h b/drivers/net/wireless/ath/ath6kl/hif-ops.h
index eed22870448b..0c4c602464b7 100644
--- a/drivers/net/wireless/ath/ath6kl/hif-ops.h
+++ b/drivers/net/wireless/ath/ath6kl/hif-ops.h
@@ -91,6 +91,16 @@ static inline int ath6kl_hif_suspend(struct ath6kl *ar,
return ar->hif_ops->suspend(ar, wow);
}
+static inline int ath6kl_hif_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
+{
+ return ar->hif_ops->bmi_read(ar, buf, len);
+}
+
+static inline int ath6kl_hif_bmi_write(struct ath6kl *ar, u8 *buf, u32 len)
+{
+ return ar->hif_ops->bmi_write(ar, buf, len);
+}
+
static inline int ath6kl_hif_resume(struct ath6kl *ar)
{
ath6kl_dbg(ATH6KL_DBG_HIF, "hif resume\n");
diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index f2dc3bcdae4a..42004e9069b6 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -244,6 +244,8 @@ struct ath6kl_hif_ops {
void (*cleanup_scatter)(struct ath6kl *ar);
int (*suspend)(struct ath6kl *ar, struct cfg80211_wowlan *wow);
int (*resume)(struct ath6kl *ar);
+ int (*bmi_read)(struct ath6kl *ar, u8 *buf, u32 len);
+ int (*bmi_write)(struct ath6kl *ar, u8 *buf, u32 len);
int (*power_on)(struct ath6kl *ar);
int (*power_off)(struct ath6kl *ar);
void (*stop)(struct ath6kl *ar);
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index beb5f9bf26af..080be036a27e 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -845,6 +845,166 @@ static int ath6kl_sdio_resume(struct ath6kl *ar)
return 0;
}
+static int ath6kl_sdio_bmi_credits(struct ath6kl *ar)
+{
+ u32 addr;
+ unsigned long timeout;
+ int ret;
+
+ ar->bmi.cmd_credits = 0;
+
+ /* Read the counter register to get the command credits */
+ addr = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4;
+
+ timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);
+ while (time_before(jiffies, timeout) && !ar->bmi.cmd_credits) {
+
+ /*
+ * Hit the credit counter with a 4-byte access, the first byte
+ * read will hit the counter and cause a decrement, while the
+ * remaining 3 bytes has no effect. The rationale behind this
+ * is to make all HIF accesses 4-byte aligned.
+ */
+ ret = ath6kl_sdio_read_write_sync(ar, addr,
+ (u8 *)&ar->bmi.cmd_credits, 4,
+ HIF_RD_SYNC_BYTE_INC);
+ if (ret) {
+ ath6kl_err("Unable to decrement the command credit "
+ "count register: %d\n", ret);
+ return ret;
+ }
+
+ /* The counter is only 8 bits.
+ * Ignore anything in the upper 3 bytes
+ */
+ ar->bmi.cmd_credits &= 0xFF;
+ }
+
+ if (!ar->bmi.cmd_credits) {
+ ath6kl_err("bmi communication timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int ath6kl_bmi_get_rx_lkahd(struct ath6kl *ar)
+{
+ unsigned long timeout;
+ u32 rx_word = 0;
+ int ret = 0;
+
+ timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);
+ while ((time_before(jiffies, timeout)) && !rx_word) {
+ ret = ath6kl_sdio_read_write_sync(ar,
+ RX_LOOKAHEAD_VALID_ADDRESS,
+ (u8 *)&rx_word, sizeof(rx_word),
+ HIF_RD_SYNC_BYTE_INC);
+ if (ret) {
+ ath6kl_err("unable to read RX_LOOKAHEAD_VALID\n");
+ return ret;
+ }
+
+ /* all we really want is one bit */
+ rx_word &= (1 << ENDPOINT1);
+ }
+
+ if (!rx_word) {
+ ath6kl_err("bmi_recv_buf FIFO empty\n");
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int ath6kl_sdio_bmi_write(struct ath6kl *ar, u8 *buf, u32 len)
+{
+ int ret;
+ u32 addr;
+
+ ret = ath6kl_sdio_bmi_credits(ar);
+ if (ret)
+ return ret;
+
+ addr = ar->mbox_info.htc_addr;
+
+ ret = ath6kl_sdio_read_write_sync(ar, addr, buf, len,
+ HIF_WR_SYNC_BYTE_INC);
+ if (ret)
+ ath6kl_err("unable to send the bmi data to the device\n");
+
+ return ret;
+}
+
+static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
+{
+ int ret;
+ u32 addr;
+
+ /*
+ * During normal bootup, small reads may be required.
+ * Rather than issue an HIF Read and then wait as the Target
+ * adds successive bytes to the FIFO, we wait here until
+ * we know that response data is available.
+ *
+ * This allows us to cleanly timeout on an unexpected
+ * Target failure rather than risk problems at the HIF level.
+ * In particular, this avoids SDIO timeouts and possibly garbage
+ * data on some host controllers. And on an interconnect
+ * such as Compact Flash (as well as some SDIO masters) which
+ * does not provide any indication on data timeout, it avoids
+ * a potential hang or garbage response.
+ *
+ * Synchronization is more difficult for reads larger than the
+ * size of the MBOX FIFO (128B), because the Target is unable
+ * to push the 129th byte of data until AFTER the Host posts an
+ * HIF Read and removes some FIFO data. So for large reads the
+ * Host proceeds to post an HIF Read BEFORE all the data is
+ * actually available to read. Fortunately, large BMI reads do
+ * not occur in practice -- they're supported for debug/development.
+ *
+ * So Host/Target BMI synchronization is divided into these cases:
+ * CASE 1: length < 4
+ * Should not happen
+ *
+ * CASE 2: 4 <= length <= 128
+ * Wait for first 4 bytes to be in FIFO
+ * If CONSERVATIVE_BMI_READ is enabled, also wait for
+ * a BMI command credit, which indicates that the ENTIRE
+ * response is available in the the FIFO
+ *
+ * CASE 3: length > 128
+ * Wait for the first 4 bytes to be in FIFO
+ *
+ * For most uses, a small timeout should be sufficient and we will
+ * usually see a response quickly; but there may be some unusual
+ * (debug) cases of BMI_EXECUTE where we want an larger timeout.
+ * For now, we use an unbounded busy loop while waiting for
+ * BMI_EXECUTE.
+ *
+ * If BMI_EXECUTE ever needs to support longer-latency execution,
+ * especially in production, this code needs to be enhanced to sleep
+ * and yield. Also note that BMI_COMMUNICATION_TIMEOUT is currently
+ * a function of Host processor speed.
+ */
+ if (len >= 4) { /* NB: Currently, always true */
+ ret = ath6kl_bmi_get_rx_lkahd(ar);
+ if (ret)
+ return ret;
+ }
+
+ addr = ar->mbox_info.htc_addr;
+ ret = ath6kl_sdio_read_write_sync(ar, addr, buf, len,
+ HIF_RD_SYNC_BYTE_INC);
+ if (ret) {
+ ath6kl_err("Unable to read the bmi data from the device: %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
static void ath6kl_sdio_stop(struct ath6kl *ar)
{
struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
@@ -889,6 +1049,8 @@ static const struct ath6kl_hif_ops ath6kl_sdio_ops = {
.cleanup_scatter = ath6kl_sdio_cleanup_scatter,
.suspend = ath6kl_sdio_suspend,
.resume = ath6kl_sdio_resume,
+ .bmi_read = ath6kl_sdio_bmi_read,
+ .bmi_write = ath6kl_sdio_bmi_write,
.power_on = ath6kl_sdio_power_on,
.power_off = ath6kl_sdio_power_off,
.stop = ath6kl_sdio_stop,
OpenPOWER on IntegriCloud