summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorChristian Krafft <krafft@de.ibm.com>2007-04-23 21:35:41 +0200
committerArnd Bergmann <arnd@klappe.arndb.de>2007-04-23 21:44:39 +0200
commit5f7bdaee2aaf7dfdf18c735dee62401fd26c8d72 (patch)
tree579067e1c368bfb7888e1c51fbdfb8d77d8ba6aa
parent24d560d7b9cf90451c6ef6248c09fb4cee1c76e6 (diff)
downloadblackbird-op-linux-5f7bdaee2aaf7dfdf18c735dee62401fd26c8d72.tar.gz
blackbird-op-linux-5f7bdaee2aaf7dfdf18c735dee62401fd26c8d72.zip
[POWERPC] cbe_thermal: add throttling attributes to cpu and spu nodes
This patch adds some attributes the cpu and spu nodes: /sys/devices/system/[c|s]pu/[c|s]pu*/thermal/throttle_begin /sys/devices/system/[c|s]pu/[c|s]pu*/thermal/throttle_end /sys/devices/system/[c|s]pu/[c|s]pu*/thermal/throttle_full_stop Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
-rw-r--r--arch/powerpc/platforms/cell/cbe_thermal.c155
1 files changed, 154 insertions, 1 deletions
diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c
index 0d486fd424a9..f370f0fa6f4c 100644
--- a/arch/powerpc/platforms/cell/cbe_thermal.c
+++ b/arch/powerpc/platforms/cell/cbe_thermal.c
@@ -1,6 +1,31 @@
/*
* thermal support for the cell processor
*
+ * This module adds some sysfs attributes to cpu and spu nodes.
+ * Base for measurements are the digital thermal sensors (DTS)
+ * located on the chip.
+ * The accuracy is 2 degrees, starting from 65 up to 125 degrees celsius
+ * The attributes can be found under
+ * /sys/devices/system/cpu/cpuX/thermal
+ * /sys/devices/system/spu/spuX/thermal
+ *
+ * The following attributes are added for each node:
+ * temperature:
+ * contains the current temperature measured by the DTS
+ * throttle_begin:
+ * throttling begins when temperature is greater or equal to
+ * throttle_begin. Setting this value to 125 prevents throttling.
+ * throttle_end:
+ * throttling is being ceased, if the temperature is lower than
+ * throttle_end. Due to a delay between applying throttling and
+ * a reduced temperature this value should be less than throttle_begin.
+ * A value equal to throttle_begin provides only a very little hysteresis.
+ * throttle_full_stop:
+ * If the temperatrue is greater or equal to throttle_full_stop,
+ * full throttling is applied to the cpu or spu. This value should be
+ * greater than throttle_begin and throttle_end. Setting this value to
+ * 65 prevents the unit from running code at all.
+ *
* (C) Copyright IBM Deutschland Entwicklung GmbH 2005
*
* Author: Christian Krafft <krafft@de.ibm.com>
@@ -31,9 +56,24 @@
#include "cbe_regs.h"
#include "spu_priv1_mmio.h"
+#define TEMP_MIN 65
+#define TEMP_MAX 125
+
+#define SYSDEV_PREFIX_ATTR(_prefix,_name,_mode) \
+struct sysdev_attribute attr_ ## _prefix ## _ ## _name = { \
+ .attr = { .name = __stringify(_name), .mode = _mode }, \
+ .show = _prefix ## _show_ ## _name, \
+ .store = _prefix ## _store_ ## _name, \
+};
+
static inline u8 reg_to_temp(u8 reg_value)
{
- return ((reg_value & 0x3f) << 1) + 65;
+ return ((reg_value & 0x3f) << 1) + TEMP_MIN;
+}
+
+static inline u8 temp_to_reg(u8 temp)
+{
+ return ((temp - TEMP_MIN) >> 1) & 0x3f;
}
static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev)
@@ -73,6 +113,73 @@ static ssize_t spu_show_temp(struct sys_device *sysdev, char *buf)
return sprintf(buf, "%d\n", reg_to_temp(value));
}
+static ssize_t show_throttle(struct cbe_pmd_regs __iomem *pmd_regs, char *buf, int pos)
+{
+ u64 value;
+
+ value = in_be64(&pmd_regs->tm_tpr.val);
+ /* access the corresponding byte */
+ value >>= pos;
+ value &= 0x3F;
+
+ return sprintf(buf, "%d\n", reg_to_temp(value));
+}
+
+static ssize_t store_throttle(struct cbe_pmd_regs __iomem *pmd_regs, const char *buf, size_t size, int pos)
+{
+ u64 reg_value;
+ int temp;
+ u64 new_value;
+ int ret;
+
+ ret = sscanf(buf, "%u", &temp);
+
+ if (ret != 1 || temp < TEMP_MIN || temp > TEMP_MAX)
+ return -EINVAL;
+
+ new_value = temp_to_reg(temp);
+
+ reg_value = in_be64(&pmd_regs->tm_tpr.val);
+
+ /* zero out bits for new value */
+ reg_value &= ~(0xffull << pos);
+ /* set bits to new value */
+ reg_value |= new_value << pos;
+
+ out_be64(&pmd_regs->tm_tpr.val, reg_value);
+ return size;
+}
+
+static ssize_t spu_show_throttle_end(struct sys_device *sysdev, char *buf)
+{
+ return show_throttle(get_pmd_regs(sysdev), buf, 0);
+}
+
+static ssize_t spu_show_throttle_begin(struct sys_device *sysdev, char *buf)
+{
+ return show_throttle(get_pmd_regs(sysdev), buf, 8);
+}
+
+static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev, char *buf)
+{
+ return show_throttle(get_pmd_regs(sysdev), buf, 16);
+}
+
+static ssize_t spu_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size)
+{
+ return store_throttle(get_pmd_regs(sysdev), buf, size, 0);
+}
+
+static ssize_t spu_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size)
+{
+ return store_throttle(get_pmd_regs(sysdev), buf, size, 8);
+}
+
+static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size)
+{
+ return store_throttle(get_pmd_regs(sysdev), buf, size, 16);
+}
+
static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos)
{
struct cbe_pmd_regs __iomem *pmd_regs;
@@ -100,13 +207,52 @@ static ssize_t ppe_show_temp1(struct sys_device *sysdev, char *buf)
return ppe_show_temp(sysdev, buf, 0);
}
+static ssize_t ppe_show_throttle_end(struct sys_device *sysdev, char *buf)
+{
+ return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 32);
+}
+
+static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev, char *buf)
+{
+ return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 40);
+}
+
+static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev, char *buf)
+{
+ return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 48);
+}
+
+static ssize_t ppe_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size)
+{
+ return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 32);
+}
+
+static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size)
+{
+ return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 40);
+}
+
+static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size)
+{
+ return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 48);
+}
+
+
static struct sysdev_attribute attr_spu_temperature = {
.attr = {.name = "temperature", .mode = 0400 },
.show = spu_show_temp,
};
+static SYSDEV_PREFIX_ATTR(spu, throttle_end, 0600);
+static SYSDEV_PREFIX_ATTR(spu, throttle_begin, 0600);
+static SYSDEV_PREFIX_ATTR(spu, throttle_full_stop, 0600);
+
+
static struct attribute *spu_attributes[] = {
&attr_spu_temperature.attr,
+ &attr_spu_throttle_end.attr,
+ &attr_spu_throttle_begin.attr,
+ &attr_spu_throttle_full_stop.attr,
NULL,
};
@@ -125,9 +271,16 @@ static struct sysdev_attribute attr_ppe_temperature1 = {
.show = ppe_show_temp1,
};
+static SYSDEV_PREFIX_ATTR(ppe, throttle_end, 0600);
+static SYSDEV_PREFIX_ATTR(ppe, throttle_begin, 0600);
+static SYSDEV_PREFIX_ATTR(ppe, throttle_full_stop, 0600);
+
static struct attribute *ppe_attributes[] = {
&attr_ppe_temperature0.attr,
&attr_ppe_temperature1.attr,
+ &attr_ppe_throttle_end.attr,
+ &attr_ppe_throttle_begin.attr,
+ &attr_ppe_throttle_full_stop.attr,
NULL,
};
OpenPOWER on IntegriCloud