summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorShawn Guo <shawn.guo@freescale.com>2011-01-05 21:13:11 +0000
committerDavid S. Miller <davem@davemloft.net>2011-01-09 15:42:55 -0800
commit49da97dcb6b00a6869bbc3fa6ec7fdfd8a6e41a3 (patch)
tree8d558ccfa1cd3c7c20bf0822250a4631d00519c4
parent8649a230e33320b00f778a6f7c17a2764e844730 (diff)
downloadblackbird-op-linux-49da97dcb6b00a6869bbc3fa6ec7fdfd8a6e41a3.tar.gz
blackbird-op-linux-49da97dcb6b00a6869bbc3fa6ec7fdfd8a6e41a3.zip
net/fec: add mac field into platform data and consolidate fec_get_mac
Add mac field into fec_platform_data and consolidate function fec_get_mac to get mac address in following order. 1) module parameter via kernel command line fec.macaddr=0x00,0x04,... 2) from flash in case of CONFIG_M5272 or fec_platform_data mac field for others, which typically have mac stored in fuse 3) fec mac address registers set by bootloader Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/fec.c81
-rw-r--r--include/linux/fec.h3
2 files changed, 41 insertions, 43 deletions
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 47f6b3b91423..47a3c7b499e9 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -59,15 +59,11 @@
#define FEC_ALIGNMENT 0x3
#endif
-/*
- * Define the fixed address of the FEC hardware.
- */
-#if defined(CONFIG_M5272)
-
-static unsigned char fec_mac_default[] = {
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-};
+static unsigned char macaddr[ETH_ALEN];
+module_param_array(macaddr, byte, NULL, 0);
+MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
+#if defined(CONFIG_M5272)
/*
* Some hardware gets it MAC address out of local flash memory.
* if this is non-zero then assume it is the address to get MAC from.
@@ -537,37 +533,50 @@ rx_processing_done:
}
/* ------------------------------------------------------------------------- */
-#ifdef CONFIG_M5272
static void __inline__ fec_get_mac(struct net_device *dev)
{
struct fec_enet_private *fep = netdev_priv(dev);
+ struct fec_platform_data *pdata = fep->pdev->dev.platform_data;
unsigned char *iap, tmpaddr[ETH_ALEN];
- if (FEC_FLASHMAC) {
- /*
- * Get MAC address from FLASH.
- * If it is all 1's or 0's, use the default.
- */
- iap = (unsigned char *)FEC_FLASHMAC;
- if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
- (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
- iap = fec_mac_default;
- if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
- (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
- iap = fec_mac_default;
- } else {
- *((unsigned long *) &tmpaddr[0]) = readl(fep->hwp + FEC_ADDR_LOW);
- *((unsigned short *) &tmpaddr[4]) = (readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
+ /*
+ * try to get mac address in following order:
+ *
+ * 1) module parameter via kernel command line in form
+ * fec.macaddr=0x00,0x04,0x9f,0x01,0x30,0xe0
+ */
+ iap = macaddr;
+
+ /*
+ * 2) from flash or fuse (via platform data)
+ */
+ if (!is_valid_ether_addr(iap)) {
+#ifdef CONFIG_M5272
+ if (FEC_FLASHMAC)
+ iap = (unsigned char *)FEC_FLASHMAC;
+#else
+ if (pdata)
+ memcpy(iap, pdata->mac, ETH_ALEN);
+#endif
+ }
+
+ /*
+ * 3) FEC mac registers set by bootloader
+ */
+ if (!is_valid_ether_addr(iap)) {
+ *((unsigned long *) &tmpaddr[0]) =
+ be32_to_cpu(readl(fep->hwp + FEC_ADDR_LOW));
+ *((unsigned short *) &tmpaddr[4]) =
+ be16_to_cpu(readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
iap = &tmpaddr[0];
}
memcpy(dev->dev_addr, iap, ETH_ALEN);
- /* Adjust MAC if using default MAC address */
- if (iap == fec_mac_default)
- dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->pdev->id;
+ /* Adjust MAC if using macaddr */
+ if (iap == macaddr)
+ dev->dev_addr[ETH_ALEN-1] = macaddr[ETH_ALEN-1] + fep->pdev->id;
}
-#endif
/* ------------------------------------------------------------------------- */
@@ -1087,22 +1096,8 @@ static int fec_enet_init(struct net_device *dev)
fep->hwp = (void __iomem *)dev->base_addr;
fep->netdev = dev;
- /* Set the Ethernet address */
-#ifdef CONFIG_M5272
+ /* Get the Ethernet address */
fec_get_mac(dev);
-#else
- {
- unsigned long l;
- l = readl(fep->hwp + FEC_ADDR_LOW);
- dev->dev_addr[0] = (unsigned char)((l & 0xFF000000) >> 24);
- dev->dev_addr[1] = (unsigned char)((l & 0x00FF0000) >> 16);
- dev->dev_addr[2] = (unsigned char)((l & 0x0000FF00) >> 8);
- dev->dev_addr[3] = (unsigned char)((l & 0x000000FF) >> 0);
- l = readl(fep->hwp + FEC_ADDR_HIGH);
- dev->dev_addr[4] = (unsigned char)((l & 0xFF000000) >> 24);
- dev->dev_addr[5] = (unsigned char)((l & 0x00FF0000) >> 16);
- }
-#endif
/* Set receive and transmit descriptor base. */
fep->rx_bd_base = cbd_base;
diff --git a/include/linux/fec.h b/include/linux/fec.h
index 5d3523d8dd0c..bcff455d1d53 100644
--- a/include/linux/fec.h
+++ b/include/linux/fec.h
@@ -3,6 +3,8 @@
* Copyright (c) 2009 Orex Computed Radiography
* Baruch Siach <baruch@tkos.co.il>
*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
* Header file for the FEC platform data
*
* This program is free software; you can redistribute it and/or modify
@@ -16,6 +18,7 @@
struct fec_platform_data {
phy_interface_t phy;
+ unsigned char mac[ETH_ALEN];
};
#endif
OpenPOWER on IntegriCloud