Merge tag 'tegra-for-3.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

Merge "ARM: tegra: device tree changes for 3.15" from Stephen Warren:

This enables:
- host1x and eDP support on Tegra124.
- LCD panel support for a few Tegra20 devices and Venice2.
- Enables power down, SPI flash, and USB on Venice2.
- Documents which Dalmore revision is supported.
- Adds an I2C bus mux to Cardhu.

Additionally, Tegra124 is converted to use #address-cells=<2> since the
HW suports more than 32-bits of address space, and various cleanups are
included.

* tag 'tegra-for-3.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (21 commits)
  ARM: dts: tegra: add PCIe interrupt mapping properties
  ARM: tegra: use 2 address cells for Tegra124 DT
  ARM: tegra: Rename as3722 node to pmic
  ARM: tegra: Fix whitespace around '='
  ARM: tegra: Enable USB on Venice2
  ARM: tegra: Add Tegra124 USB support
  ARM: tegra: Enable eDP for Venice2
  ARM: tegra: Add Tegra124 eDP support
  ARM: tegra: Add Tegra124 host1x support
  ARM: tegra: Hook up SDMMC3 power-supply on Venice2
  ARM: tegra: Overhaul Venice2 regulators
  ARM: tegra: Combine VBUS enable pins into one node
  ARM: tegra: Use "disabled" for status property
  ARM: tegra: add SPI flash to Venice2 DT
  ARM: tegra: enable PCA9546 on Cardhu
  ARM: tegra: enable LCD panel on Ventana
  ARM: tegra: enable LCD panel on Seaboard
  ARM: tegra: add system-power-controller property for PMIC node
  ARM: tegra: document which Dalmore revisions are supported
  ARM: tegra: Properly sort clocks property
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

11 files changed, 617 insertions, 201 deletions

diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
index 24cee06915c9..c300391e8d3e 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -42,6 +42,10 @@ Required properties:
     - 0xc2000000: prefetchable memory region
   Please refer to the standard PCI bus binding document for a more detailed
   explanation.
+- #interrupt-cells: Size representation for interrupts (must be 1)
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+  Please refer to the standard PCI bus binding document for a more detailed
+  explanation.
 - clocks: Must contain an entry for each entry in clock-names.
   See ../clocks/clock-bindings.txt for details.
 - clock-names: Must include the following entries:
@@ -86,6 +90,10 @@ SoC DTSI:
 		              0 99 0x04>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
 		bus-range = <0x00 0xff>;
 		#address-cells = <3>;
 		#size-cells = <2>;
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 73aecfb57ccb..8de543777882 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -1,3 +1,8 @@
+/*
+ * This dts file supports Dalmore A04.
+ * Other board revisions are not supported
+ */
+
 /dts-v1/;
 
 #include <dt-bindings/input/input.h>
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index 44ec401ec366..fdc559ab2db3 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -604,7 +604,7 @@
 		clocks = <&tegra_car TEGRA114_CLK_SDMMC1>;
 		resets = <&tegra_car 14>;
 		reset-names = "sdhci";
-		status = "disable";
+		status = "disabled";
 	};
 
 	sdhci@78000200 {
@@ -614,7 +614,7 @@
 		clocks = <&tegra_car TEGRA114_CLK_SDMMC2>;
 		resets = <&tegra_car 9>;
 		reset-names = "sdhci";
-		status = "disable";
+		status = "disabled";
 	};
 
 	sdhci@78000400 {
@@ -624,7 +624,7 @@
 		clocks = <&tegra_car TEGRA114_CLK_SDMMC3>;
 		resets = <&tegra_car 69>;
 		reset-names = "sdhci";
-		status = "disable";
+		status = "disabled";
 	};
 
 	sdhci@78000600 {
@@ -634,7 +634,7 @@
 		clocks = <&tegra_car TEGRA114_CLK_SDMMC4>;
 		resets = <&tegra_car 15>;
 		reset-names = "sdhci";
-		status = "disable";
+		status = "disabled";
 	};
 
 	usb@7d000000 {
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index c6dcef513e5d..86536d919ed2 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -8,15 +8,29 @@
 	compatible = "nvidia,venice2", "nvidia,tegra124";
 
 	aliases {
-		rtc0 = "/i2c@7000d000/as3722@40";
-		rtc1 = "/rtc@7000e000";
+		rtc0 = "/i2c@0,7000d000/pmic@40";
+		rtc1 = "/rtc@0,7000e000";
 	};
 
 	memory {
-		reg = <0x80000000 0x80000000>;
+		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	pinmux: pinmux@70000868 {
+	host1x@0,50000000 {
+		sor@0,54540000 {
+			status = "okay";
+
+			nvidia,dpaux = <&dpaux>;
+			nvidia,panel = <&panel>;
+		};
+
+		dpaux: dpaux@0,545c0000 {
+			vdd-supply = <&vdd_3v3_panel>;
+			status = "okay";
+		};
+	};
+
+	pinmux: pinmux@0,70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
@@ -402,19 +416,11 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 			usb_vbus_en0_pn4 {
-				nvidia,pins = "usb_vbus_en0_pn4";
-				nvidia,function = "usb";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			usb_vbus_en1_pn5 {
-				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,pins = "usb_vbus_en0_pn4",
+					      "usb_vbus_en1_pn5";
 				nvidia,function = "usb";
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 				nvidia,lock = <TEGRA_PIN_DISABLE>;
 				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
@@ -572,15 +578,15 @@
 		};
 	};
 
-	serial@70006000 {
+	serial@0,70006000 {
 		status = "okay";
 	};
 
-	pwm: pwm@7000a000 {
+	pwm: pwm@0,7000a000 {
 		status = "okay";
 	};
 
-	i2c@7000c000 {
+	i2c@0,7000c000 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -592,30 +598,32 @@
 		};
 	};
 
-	i2c@7000c400 {
+	i2c@0,7000c400 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@7000c500 {
+	i2c@0,7000c500 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@7000c700 {
+	i2c@0,7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@7000d000 {
+	i2c@0,7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
-		as3722: as3722@40 {
+		pmic: pmic@40 {
 			compatible = "ams,as3722";
 			reg = <0x40>;
 			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 
+			ams,system-power-controller;
+
 			#interrupt-cells = <2>;
 			interrupt-controller;
 
@@ -650,19 +658,19 @@
 			};
 
 			regulators {
-				vsup-sd2-supply = <&vdd_ac_bat_reg>;
-				vsup-sd3-supply = <&vdd_ac_bat_reg>;
-				vsup-sd4-supply = <&vdd_ac_bat_reg>;
-				vsup-sd5-supply = <&vdd_ac_bat_reg>;
-				vin-ldo0-supply = <&as3722_sd2>;
-				vin-ldo1-6-supply = <&vdd_ac_bat_reg>;
-				vin-ldo2-5-7-supply = <&as3722_sd5>;
-				vin-ldo3-4-supply = <&vdd_ac_bat_reg>;
-				vin-ldo9-10-supply = <&vdd_ac_bat_reg>;
-				vin-ldo11-supply = <&vdd_ac_bat_reg>;
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_run>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
 
 				sd0 {
-					regulator-name = "vdd-cpu";
+					regulator-name = "+VDD_CPU_AP";
 					regulator-min-microvolt = <700000>;
 					regulator-max-microvolt = <1400000>;
 					regulator-min-microamp = <3500000>;
@@ -673,7 +681,7 @@
 				};
 
 				sd1 {
-					regulator-name = "vdd-core";
+					regulator-name = "+VDD_CORE";
 					regulator-min-microvolt = <700000>;
 					regulator-max-microvolt = <1350000>;
 					regulator-min-microamp = <2500000>;
@@ -683,8 +691,8 @@
 					ams,external-control = <1>;
 				};
 
-				as3722_sd2: sd2 {
-					regulator-name = "vddio-ddr";
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
 					regulator-min-microvolt = <1350000>;
 					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
@@ -692,7 +700,7 @@
 				};
 
 				sd3 {
-					regulator-name = "vddio-ddr-2phase";
+					regulator-name = "+1.35V_LP0(sd3)";
 					regulator-min-microvolt = <1350000>;
 					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
@@ -700,15 +708,13 @@
 				};
 
 				sd4 {
-					regulator-name = "avdd-pex-sata";
+					regulator-name = "+1.05V_RUN";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
-					regulator-boot-on;
-					regulator-always-on;
 				};
 
-				as3722_sd5: sd5 {
-					regulator-name = "vddio-sys";
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-boot-on;
@@ -716,7 +722,7 @@
 				};
 
 				sd6 {
-					regulator-name = "vdd-gpu";
+					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-min-microamp = <3500000>;
@@ -726,7 +732,7 @@
 				};
 
 				ldo0 {
-					regulator-name = "avdd_pll";
+					regulator-name = "+1.05V_RUN_AVDD";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
 					regulator-boot-on;
@@ -735,13 +741,13 @@
 				};
 
 				ldo1 {
-					regulator-name = "run-cam-1.8";
+					regulator-name = "+1.8V_RUN_CAM";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
 				ldo2 {
-					regulator-name = "gen-avdd,vddio-hsic";
+					regulator-name = "+1.2V_GEN_AVDD";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-boot-on;
@@ -749,7 +755,7 @@
 				};
 
 				ldo3 {
-					regulator-name = "vdd-rtc";
+					regulator-name = "+1.00V_LP0_VDD_RTC";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-boot-on;
@@ -757,48 +763,44 @@
 					ams,enable-tracking;
 				};
 
-				ldo4 {
-					regulator-name = "vdd-cam";
+				vdd_run_cam: ldo4 {
+					regulator-name = "+3.3V_RUN_CAM";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
-					regulator-boot-on;
-					regulator-always-on;
 				};
 
 				ldo5 {
-					regulator-name = "vdd-cam-front";
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 				};
 
-				ldo6 {
-					regulator-name = "vddio-sdmmc3";
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-					regulator-always-on;
 				};
 
 				ldo7 {
-					regulator-name = "vdd-cam-rear";
+					regulator-name = "+1.05V_RUN_CAM_REAR";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
 				};
 
 				ldo9 {
-					regulator-name = "vdd-touch";
+					regulator-name = "+2.8V_RUN_TOUCH";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 				};
 
 				ldo10 {
-					regulator-name = "vdd-cam-af";
+					regulator-name = "+2.8V_RUN_CAM_AF";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 				};
 
 				ldo11 {
-					regulator-name = "vpp-fuse";
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
@@ -806,7 +808,7 @@
 		};
 	};
 
-	spi@7000d400 {
+	spi@0,7000d400 {
 		status = "okay";
 
 		cros-ec@0 {
@@ -912,7 +914,17 @@
 		};
 	};
 
-	pmc@7000e400 {
+	spi@0,7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@0 {
+			compatible = "winbond,w25q32dw";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@0,7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <500>;
@@ -923,24 +935,63 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
-	sdhci@700b0400 {
+	sdhci@0,700b0400 {
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
 		status = "okay";
 		bus-width = <4>;
+		vmmc-supply = <&vddio_sdmmc3>;
 	};
 
-	sdhci@700b0600 {
+	sdhci@0,700b0600 {
 		status = "okay";
 		bus-width = <8>;
 	};
 
-	ahub@70300000 {
-		i2s@70301100 {
+	ahub@0,70300000 {
+		i2s@0,70301100 {
 			status = "okay";
 		};
 	};
 
+	usb@0,7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d000000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb1_vbus>;
+	};
+
+	usb@0,7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d004000 {
+		status = "okay";
+		vbus-supply = <&vdd_run_cam>;
+	};
+
+	usb@0,7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb3_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_led>;
+		pwms = <&pwm 1 1000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -948,7 +999,7 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
@@ -966,104 +1017,140 @@
 		};
 	};
 
+	panel: panel {
+		compatible = "lg,lp129qe", "simple-panel";
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&dpaux>;
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		vdd_ac_bat_reg: regulator@0 {
+		vdd_mux: regulator@0 {
 			compatible = "regulator-fixed";
 			reg = <0>;
-			regulator-name = "vdd_ac_bat";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+			regulator-name = "+VDD_MUX";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
 			regulator-always-on;
+			regulator-boot-on;
 		};
 
-		vdd_3v3_reg: regulator@1 {
+		vdd_5v0_sys: regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
-			regulator-name = "vdd_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
+			regulator-name = "+5V_SYS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
 			regulator-always-on;
 			regulator-boot-on;
-			enable-active-high;
-			gpio = <&as3722 1 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vdd_mux>;
 		};
 
-		vdd_3v3_modem_reg: regulator@2 {
+		vdd_3v3_sys: regulator@2 {
 			compatible = "regulator-fixed";
 			reg = <2>;
-			regulator-name = "vdd-modem-3v3";
+			regulator-name = "+3.3V_SYS";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&as3722 2 GPIO_ACTIVE_HIGH>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
 		};
 
-		vdd_hdmi_5v0_reg: regulator@3 {
+		vdd_3v3_run: regulator@3 {
 			compatible = "regulator-fixed";
 			reg = <3>;
-			regulator-name = "vdd-hdmi-5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+			regulator-name = "+3.3V_RUN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vdd_3v3_sys>;
 		};
 
-		vdd_bl_reg: regulator@4 {
+		vdd_3v3_hdmi: regulator@4 {
 			compatible = "regulator-fixed";
 			reg = <4>;
-			regulator-name = "vdd-bl";
+			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_LOW>;
+			vin-supply = <&vdd_3v3_run>;
 		};
 
-		vdd_ts_sw_5v0: regulator@5 {
+		vdd_led: regulator@5 {
 			compatible = "regulator-fixed";
 			reg = <5>;
-			regulator-name = "vdd_ts_sw";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+			regulator-name = "+VDD_LED";
+			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
 			enable-active-high;
-			regulator-boot-on;
-			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_LOW>;
+			vin-supply = <&vdd_mux>;
 		};
 
-		usb1_vbus_reg: regulator@6 {
+		vdd_5v0_ts: regulator@6 {
 			compatible = "regulator-fixed";
 			reg = <6>;
-			regulator-name = "usb1_vbus";
+			regulator-name = "+5V_VDD_TS_SW";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			regulator-boot-on;
+			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
 			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
 		};
 
-		usb3_vbus_reg: regulator@7 {
+		vdd_usb1_vbus: regulator@7 {
 			compatible = "regulator-fixed";
 			reg = <7>;
-			regulator-name = "usb3_vbus";
+			regulator-name = "+5V_USB_HS";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
+			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
 			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
 			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
 		};
 
-		panel_3v3_reg: regulator@8 {
+		vdd_usb3_vbus: regulator@8 {
 			compatible = "regulator-fixed";
 			reg = <8>;
-			regulator-name = "panel_3v3";
+			regulator-name = "+5V_USB_SS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_3v3_panel: regulator@9 {
+			compatible = "regulator-fixed";
+			reg = <9>;
+			regulator-name = "+3.3V_PANEL";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
+			gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_run>;
+		};
+
+		vdd_3v3_lp0: regulator@10 {
+			compatible = "regulator-fixed";
+			reg = <10>;
+			regulator-name = "+3.3V_LP0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			/*
+			 * TODO: find a way to wire this up with the USB EHCI
+			 * controllers so that it can be enabled on demand.
+			 */
+			regulator-always-on;
+			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
-			gpio = <&as3722 4 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vdd_3v3_sys>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index ec0698a8354a..cf45a1a39483 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -8,22 +8,91 @@
 / {
 	compatible = "nvidia,tegra124";
 	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	host1x@0,50000000 {
+		compatible = "nvidia,tegra124-host1x", "simple-bus";
+		reg = <0x0 0x50000000 0x0 0x00034000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0 0x54000000 0 0x54000000 0 0x01000000>;
+
+		dc@0,54200000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x0 0x54200000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP1>,
+				 <&tegra_car TEGRA124_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			nvidia,head = <0>;
+		};
+
+		dc@0,54240000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x0 0x54240000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP2>,
+				 <&tegra_car TEGRA124_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			nvidia,head = <1>;
+		};
 
-	gic: interrupt-controller@50041000 {
+		sor@0,54540000 {
+			compatible = "nvidia,tegra124-sor";
+			reg = <0x0 0x54540000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_SOR0>,
+				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>,
+				 <&tegra_car TEGRA124_CLK_CLK_M>;
+			clock-names = "sor", "parent", "dp", "safe";
+			resets = <&tegra_car 182>;
+			reset-names = "sor";
+			status = "disabled";
+		};
+
+		dpaux@0,545c0000 {
+			compatible = "nvidia,tegra124-dpaux";
+			reg = <0x0 0x545c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DPAUX>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>;
+			clock-names = "dpaux", "parent";
+			resets = <&tegra_car 181>;
+			reset-names = "dpaux";
+			status = "disabled";
+		};
+	};
+
+	gic: interrupt-controller@0,50041000 {
 		compatible = "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
-		reg = <0x50041000 0x1000>,
-		      <0x50042000 0x1000>,
-		      <0x50044000 0x2000>,
-		      <0x50046000 0x2000>;
+		reg = <0x0 0x50041000 0x0 0x1000>,
+		      <0x0 0x50042000 0x0 0x1000>,
+		      <0x0 0x50044000 0x0 0x2000>,
+		      <0x0 0x50046000 0x0 0x2000>;
 		interrupts = <GIC_PPI 9
 			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
-	timer@60005000 {
+	timer@0,60005000 {
 		compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer";
-		reg = <0x60005000 0x400>;
+		reg = <0x0 0x60005000 0x0 0x400>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
@@ -33,16 +102,16 @@
 		clocks = <&tegra_car TEGRA124_CLK_TIMER>;
 	};
 
-	tegra_car: clock@60006000 {
+	tegra_car: clock@0,60006000 {
 		compatible = "nvidia,tegra124-car";
-		reg = <0x60006000 0x1000>;
+		reg = <0x0 0x60006000 0x0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
 
-	gpio: gpio@6000d000 {
+	gpio: gpio@0,6000d000 {
 		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
-		reg = <0x6000d000 0x1000>;
+		reg = <0x0 0x6000d000 0x0 0x1000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
@@ -57,9 +126,9 @@
 		interrupt-controller;
 	};
 
-	apbdma: dma@60020000 {
+	apbdma: dma@0,60020000 {
 		compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
-		reg = <0x60020000 0x1400>;
+		reg = <0x0 0x60020000 0x0 0x1400>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
@@ -98,10 +167,10 @@
 		#dma-cells = <1>;
 	};
 
-	pinmux: pinmux@70000868 {
+	pinmux: pinmux@0,70000868 {
 		compatible = "nvidia,tegra124-pinmux";
-		reg = <0x70000868 0x164>,	/* Pad control registers */
-		      <0x70003000 0x434>;	/* Mux registers */
+		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
+		      <0x0 0x70003000 0x0 0x434>; /* Mux registers */
 	};
 
 	/*
@@ -112,9 +181,9 @@
 	 * the APB DMA based serial driver, the comptible is
 	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
 	 */
-	serial@70006000 {
+	serial@0,70006000 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x70006000 0x40>;
+		reg = <0x0 0x70006000 0x0 0x40>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTA>;
@@ -125,9 +194,9 @@
 		status = "disabled";
 	};
 
-	serial@70006040 {
+	serial@0,70006040 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x70006040 0x40>;
+		reg = <0x0 0x70006040 0x0 0x40>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTB>;
@@ -138,9 +207,9 @@
 		status = "disabled";
 	};
 
-	serial@70006200 {
+	serial@0,70006200 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x70006200 0x40>;
+		reg = <0x0 0x70006200 0x0 0x40>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTC>;
@@ -151,9 +220,9 @@
 		status = "disabled";
 	};
 
-	serial@70006300 {
+	serial@0,70006300 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x70006300 0x40>;
+		reg = <0x0 0x70006300 0x0 0x40>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTD>;
@@ -164,9 +233,9 @@
 		status = "disabled";
 	};
 
-	serial@70006400 {
+	serial@0,70006400 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x70006400 0x40>;
+		reg = <0x0 0x70006400 0x0 0x40>;
 		reg-shift = <2>;
 		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTE>;
@@ -177,9 +246,9 @@
 		status = "disabled";
 	};
 
-	pwm@7000a000 {
+	pwm@0,7000a000 {
 		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
-		reg = <0x7000a000 0x100>;
+		reg = <0x0 0x7000a000 0x0 0x100>;
 		#pwm-cells = <2>;
 		clocks = <&tegra_car TEGRA124_CLK_PWM>;
 		resets = <&tegra_car 17>;
@@ -187,9 +256,9 @@
 		status = "disabled";
 	};
 
-	i2c@7000c000 {
+	i2c@0,7000c000 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x7000c000 0x100>;
+		reg = <0x0 0x7000c000 0x0 0x100>;
 		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -202,9 +271,9 @@
 		status = "disabled";
 	};
 
-	i2c@7000c400 {
+	i2c@0,7000c400 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x7000c400 0x100>;
+		reg = <0x0 0x7000c400 0x0 0x100>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -217,9 +286,9 @@
 		status = "disabled";
 	};
 
-	i2c@7000c500 {
+	i2c@0,7000c500 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x7000c500 0x100>;
+		reg = <0x0 0x7000c500 0x0 0x100>;
 		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -232,9 +301,9 @@
 		status = "disabled";
 	};
 
-	i2c@7000c700 {
+	i2c@0,7000c700 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x7000c700 0x100>;
+		reg = <0x0 0x7000c700 0x0 0x100>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -247,9 +316,9 @@
 		status = "disabled";
 	};
 
-	i2c@7000d000 {
+	i2c@0,7000d000 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x7000d000 0x100>;
+		reg = <0x0 0x7000d000 0x0 0x100>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -262,9 +331,9 @@
 		status = "disabled";
 	};
 
-	i2c@7000d100 {
+	i2c@0,7000d100 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x7000d100 0x100>;
+		reg = <0x0 0x7000d100 0x0 0x100>;
 		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -277,9 +346,9 @@
 		status = "disabled";
 	};
 
-	spi@7000d400 {
+	spi@0,7000d400 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x7000d400 0x200>;
+		reg = <0x0 0x7000d400 0x0 0x200>;
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -292,9 +361,9 @@
 		status = "disabled";
 	};
 
-	spi@7000d600 {
+	spi@0,7000d600 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x7000d600 0x200>;
+		reg = <0x0 0x7000d600 0x0 0x200>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -307,9 +376,9 @@
 		status = "disabled";
 	};
 
-	spi@7000d800 {
+	spi@0,7000d800 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x7000d800 0x200>;
+		reg = <0x0 0x7000d800 0x0 0x200>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -322,9 +391,9 @@
 		status = "disabled";
 	};
 
-	spi@7000da00 {
+	spi@0,7000da00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x7000da00 0x200>;
+		reg = <0x0 0x7000da00 0x0 0x200>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -337,9 +406,9 @@
 		status = "disabled";
 	};
 
-	spi@7000dc00 {
+	spi@0,7000dc00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x7000dc00 0x200>;
+		reg = <0x0 0x7000dc00 0x0 0x200>;
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -352,9 +421,9 @@
 		status = "disabled";
 	};
 
-	spi@7000de00 {
+	spi@0,7000de00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x7000de00 0x200>;
+		reg = <0x0 0x7000de00 0x0 0x200>;
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -367,65 +436,65 @@
 		status = "disabled";
 	};
 
-	rtc@7000e000 {
+	rtc@0,7000e000 {
 		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
-		reg = <0x7000e000 0x100>;
+		reg = <0x0 0x7000e000 0x0 0x100>;
 		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_RTC>;
 	};
 
-	pmc@7000e400 {
+	pmc@0,7000e400 {
 		compatible = "nvidia,tegra124-pmc";
-		reg = <0x7000e400 0x400>;
+		reg = <0x0 0x7000e400 0x0 0x400>;
 		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
 	};
 
-	sdhci@700b0000 {
+	sdhci@0,700b0000 {
 		compatible = "nvidia,tegra124-sdhci";
-		reg = <0x700b0000 0x200>;
+		reg = <0x0 0x700b0000 0x0 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_SDMMC1>;
 		resets = <&tegra_car 14>;
 		reset-names = "sdhci";
-		status = "disable";
+		status = "disabled";
 	};
 
-	sdhci@700b0200 {
+	sdhci@0,700b0200 {
 		compatible = "nvidia,tegra124-sdhci";
-		reg = <0x700b0200 0x200>;
+		reg = <0x0 0x700b0200 0x0 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_SDMMC2>;
 		resets = <&tegra_car 9>;
 		reset-names = "sdhci";
-		status = "disable";
+		status = "disabled";
 	};
 
-	sdhci@700b0400 {
+	sdhci@0,700b0400 {
 		compatible = "nvidia,tegra124-sdhci";
-		reg = <0x700b0400 0x200>;
+		reg = <0x0 0x700b0400 0x0 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_SDMMC3>;
 		resets = <&tegra_car 69>;
 		reset-names = "sdhci";
-		status = "disable";
+		status = "disabled";
 	};
 
-	sdhci@700b0600 {
+	sdhci@0,700b0600 {
 		compatible = "nvidia,tegra124-sdhci";
-		reg = <0x700b0600 0x200>;
+		reg = <0x0 0x700b0600 0x0 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_SDMMC4>;
 		resets = <&tegra_car 15>;
 		reset-names = "sdhci";
-		status = "disable";
+		status = "disabled";
 	};
 
-	ahub@70300000 {
+	ahub@0,70300000 {
 		compatible = "nvidia,tegra124-ahub";
-		reg = <0x70300000 0x200>,
-		      <0x70300800 0x800>,
-		      <0x70300200 0x600>;
+		reg = <0x0 0x70300000 0x0 0x200>,
+		      <0x0 0x70300800 0x0 0x800>,
+		      <0x0 0x70300200 0x0 0x600>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>,
 			 <&tegra_car TEGRA124_CLK_APBIF>;
@@ -470,12 +539,12 @@
 			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
 			    "rx9", "tx9";
 		ranges;
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 
-		tegra_i2s0: i2s@70301000 {
+		tegra_i2s0: i2s@0,70301000 {
 			compatible = "nvidia,tegra124-i2s";
-			reg = <0x70301000 0x100>;
+			reg = <0x0 0x70301000 0x0 0x100>;
 			nvidia,ahub-cif-ids = <4 4>;
 			clocks = <&tegra_car TEGRA124_CLK_I2S0>;
 			resets = <&tegra_car 30>;
@@ -483,9 +552,9 @@
 			status = "disabled";
 		};
 
-		tegra_i2s1: i2s@70301100 {
+		tegra_i2s1: i2s@0,70301100 {
 			compatible = "nvidia,tegra124-i2s";
-			reg = <0x70301100 0x100>;
+			reg = <0x0 0x70301100 0x0 0x100>;
 			nvidia,ahub-cif-ids = <5 5>;
 			clocks = <&tegra_car TEGRA124_CLK_I2S1>;
 			resets = <&tegra_car 11>;
@@ -493,9 +562,9 @@
 			status = "disabled";
 		};
 
-		tegra_i2s2: i2s@70301200 {
+		tegra_i2s2: i2s@0,70301200 {
 			compatible = "nvidia,tegra124-i2s";
-			reg = <0x70301200 0x100>;
+			reg = <0x0 0x70301200 0x0 0x100>;
 			nvidia,ahub-cif-ids = <6 6>;
 			clocks = <&tegra_car TEGRA124_CLK_I2S2>;
 			resets = <&tegra_car 18>;
@@ -503,9 +572,9 @@
 			status = "disabled";
 		};
 
-		tegra_i2s3: i2s@70301300 {
+		tegra_i2s3: i2s@0,70301300 {
 			compatible = "nvidia,tegra124-i2s";
-			reg = <0x70301300 0x100>;
+			reg = <0x0 0x70301300 0x0 0x100>;
 			nvidia,ahub-cif-ids = <7 7>;
 			clocks = <&tegra_car TEGRA124_CLK_I2S3>;
 			resets = <&tegra_car 101>;
@@ -513,9 +582,9 @@
 			status = "disabled";
 		};
 
-		tegra_i2s4: i2s@70301400 {
+		tegra_i2s4: i2s@0,70301400 {
 			compatible = "nvidia,tegra124-i2s";
-			reg = <0x70301400 0x100>;
+			reg = <0x0 0x70301400 0x0 0x100>;
 			nvidia,ahub-cif-ids = <8 8>;
 			clocks = <&tegra_car TEGRA124_CLK_I2S4>;
 			resets = <&tegra_car 102>;
@@ -524,6 +593,108 @@
 		};
 	};
 
+	usb@0,7d000000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@0,7d000000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d000000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	usb@0,7d004000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d004000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>;
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@0,7d004000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d004000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	usb@0,7d008000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d008000 0x0 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@0,7d008000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d008000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index c7cd8e6802d7..9a39a8001f78 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -17,6 +17,14 @@
 	};
 
 	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
 		hdmi@54280000 {
 			status = "okay";
 
@@ -257,7 +265,11 @@
 		status = "okay";
 	};
 
-	i2c@7000c000 {
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	lvds_ddc: i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -475,6 +487,18 @@
 		non-removable;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
+		default-brightness-level = <10>;
+
+		backlight-boot-off;
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -509,6 +533,16 @@
 		};
 	};
 
+	panel: panel {
+		compatible = "samsung,ltn101nt05", "simple-panel";
+
+		ddc-i2c-bus = <&lvds_ddc>;
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(M, 6) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -522,6 +556,16 @@
 			regulator-max-microvolt = <5000000>;
 			regulator-always-on;
 		};
+
+		vdd_pnl_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "+3VS,vdd_pnl";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index a11b6e7b4759..a1d4bf9895d7 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -17,6 +17,14 @@
 	};
 
 	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
 		hdmi@54280000 {
 			status = "okay";
 
@@ -312,6 +320,10 @@
 		status = "okay";
 	};
 
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
 	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <400000>;
@@ -369,7 +381,7 @@
 			#size-cells = <0>;
 		};
 
-		i2c@1 {
+		lvds_ddc: i2c@1 {
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -762,6 +774,17 @@
 		non-removable;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 2 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -795,6 +818,16 @@
 		};
 	};
 
+	panel: panel {
+		compatible = "chunghwa,claa101wa01a", "simple-panel";
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -839,6 +872,26 @@
 			regulator-always-on;
 			regulator-boot-on;
 		};
+
+		vdd_pnl_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "vdd_pnl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vdd_bl_reg: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 571d12e6ac2d..ca8484cccddc 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -17,6 +17,14 @@
 	};
 
 	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
 		hdmi@54280000 {
 			status = "okay";
 
@@ -309,6 +317,10 @@
 		status = "okay";
 	};
 
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
 	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <400000>;
@@ -359,7 +371,7 @@
 			#size-cells = <0>;
 		};
 
-		i2c@1 {
+		lvds_ddc: i2c@1 {
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -557,6 +569,17 @@
 		non-removable;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 2 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -581,6 +604,16 @@
 		};
 	};
 
+	panel: panel {
+		compatible = "chunghwa,claa101wa01a", "simple-panel";
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -614,7 +647,7 @@
 			enable-active-high;
 		};
 
-		regulator@3 {
+		vdd_pnl_reg: regulator@3 {
 			compatible = "regulator-fixed";
 			reg = <3>;
 			regulator-name = "vdd_pnl";
@@ -624,7 +657,7 @@
 			enable-active-high;
 		};
 
-		regulator@4 {
+		vdd_bl_reg: regulator@4 {
 			compatible = "regulator-fixed";
 			reg = <4>;
 			regulator-name = "vdd_bl";
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 48d2a7f4d0c0..a7ddf70df50b 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -556,6 +556,10 @@
 			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
 		bus-range = <0x00 0xff>;
 		#address-cells = <3>;
 		#size-cells = <2>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 1e156d9d0506..0cf0848a82d8 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -187,6 +187,13 @@
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		i2cmux@70 {
+			compatible = "nxp,pca9546";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x70>;
+		};
 	};
 
 	i2c@7000c700 {
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 19a84e933f4e..dec4fc823901 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -28,6 +28,10 @@
 			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
 		bus-range = <0x00 0xff>;
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -144,9 +148,9 @@
 			compatible = "nvidia,tegra30-gr2d";
 			reg = <0x54140000 0x00040000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_GR2D>;
 			resets = <&tegra_car 21>;
 			reset-names = "2d";
-			clocks = <&tegra_car TEGRA30_CLK_GR2D>;
 		};
 
 		gr3d@54180000 {