usb: otg: add global ULPI register definitions

Definitions for registers defined by ULPI specification v1.1.

Signed-off-by: Heikki Krogerus <ext-heikki.krogerus@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 140 insertions, 0 deletions

diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h
index 20675c6ebc4d..2369d07c3c87 100644
--- a/include/linux/usb/ulpi.h
+++ b/include/linux/usb/ulpi.h
@@ -1,6 +1,146 @@
+/*
+ * ulpi.h -- ULPI defines and function prorotypes
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * This software is distributed under the terms of the GNU General
+ * Public License ("GPL") as published by the Free Software Foundation,
+ * version 2 of that License.
+ */
+
 #ifndef __LINUX_USB_ULPI_H
 #define __LINUX_USB_ULPI_H
 
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Macros for Set and Clear
+ * See ULPI 1.1 specification to find the registers with Set and Clear offsets
+ */
+#define ULPI_SET(a)				(a + 1)
+#define ULPI_CLR(a)				(a + 2)
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Register Map
+ */
+#define ULPI_VENDOR_ID_LOW			0x00
+#define ULPI_VENDOR_ID_HIGH			0x01
+#define ULPI_PRODUCT_ID_LOW			0x02
+#define ULPI_PRODUCT_ID_HIGH			0x03
+#define ULPI_FUNC_CTRL				0x04
+#define ULPI_IFC_CTRL				0x07
+#define ULPI_OTG_CTRL				0x0a
+#define ULPI_USB_INT_EN_RISE			0x0d
+#define ULPI_USB_INT_EN_FALL			0x10
+#define ULPI_USB_INT_STS			0x13
+#define ULPI_USB_INT_LATCH			0x14
+#define ULPI_DEBUG				0x15
+#define ULPI_SCRATCH				0x16
+/* Optional Carkit Registers */
+#define ULPI_CARCIT_CTRL			0x19
+#define ULPI_CARCIT_INT_DELAY			0x1c
+#define ULPI_CARCIT_INT_EN			0x1d
+#define ULPI_CARCIT_INT_STS			0x20
+#define ULPI_CARCIT_INT_LATCH			0x21
+#define ULPI_CARCIT_PLS_CTRL			0x22
+/* Other Optional Registers */
+#define ULPI_TX_POS_WIDTH			0x25
+#define ULPI_TX_NEG_WIDTH			0x26
+#define ULPI_POLARITY_RECOVERY			0x27
+/* Access Extended Register Set */
+#define ULPI_ACCESS_EXTENDED			0x2f
+/* Vendor Specific */
+#define ULPI_VENDOR_SPECIFIC			0x30
+/* Extended Registers */
+#define ULPI_EXT_VENDOR_SPECIFIC		0x80
+
+/*-------------------------------------------------------------------------*/
+
+/* Function Control */
+#define ULPI_FUNC_CTRL_XCVRSEL			(1 << 0)
+#define  ULPI_FUNC_CTRL_XCVRSEL_MASK		(3 << 0)
+#define  ULPI_FUNC_CTRL_HIGH_SPEED		(0 << 0)
+#define  ULPI_FUNC_CTRL_FULL_SPEED		(1 << 0)
+#define  ULPI_FUNC_CTRL_LOW_SPEED		(2 << 0)
+#define  ULPI_FUNC_CTRL_FS4LS			(3 << 0)
+#define ULPI_FUNC_CTRL_TERMSELECT		(1 << 2)
+#define ULPI_FUNC_CTRL_OPMODE			(1 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_MASK		(3 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_NORMAL		(0 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_NONDRIVING	(1 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI	(2 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP	(3 << 3)
+#define ULPI_FUNC_CTRL_RESET			(1 << 5)
+#define ULPI_FUNC_CTRL_SUSPENDM			(1 << 6)
+
+/* Interface Control */
+#define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE		(1 << 0)
+#define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE		(1 << 1)
+#define ULPI_IFC_CTRL_CARKITMODE		(1 << 2)
+#define ULPI_IFC_CTRL_CLOCKSUSPENDM		(1 << 3)
+#define ULPI_IFC_CTRL_AUTORESUME		(1 << 4)
+#define ULPI_IFC_CTRL_EXTERNAL_VBUS		(1 << 5)
+#define ULPI_IFC_CTRL_PASSTHRU			(1 << 6)
+#define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE	(1 << 7)
+
+/* OTG Control */
+#define ULPI_OTG_CTRL_ID_PULLUP			(1 << 0)
+#define ULPI_OTG_CTRL_DP_PULLDOWN		(1 << 1)
+#define ULPI_OTG_CTRL_DM_PULLDOWN		(1 << 2)
+#define ULPI_OTG_CTRL_DISCHRGVBUS		(1 << 3)
+#define ULPI_OTG_CTRL_CHRGVBUS			(1 << 4)
+#define ULPI_OTG_CTRL_DRVVBUS			(1 << 5)
+#define ULPI_OTG_CTRL_DRVVBUS_EXT		(1 << 6)
+#define ULPI_OTG_CTRL_EXTVBUSIND		(1 << 7)
+
+/* USB Interrupt Enable Rising,
+ * USB Interrupt Enable Falling,
+ * USB Interrupt Status and
+ * USB Interrupt Latch
+ */
+#define ULPI_INT_HOST_DISCONNECT		(1 << 0)
+#define ULPI_INT_VBUS_VALID			(1 << 1)
+#define ULPI_INT_SESS_VALID			(1 << 2)
+#define ULPI_INT_SESS_END			(1 << 3)
+#define ULPI_INT_IDGRD				(1 << 4)
+
+/* Debug */
+#define ULPI_DEBUG_LINESTATE0			(1 << 0)
+#define ULPI_DEBUG_LINESTATE1			(1 << 1)
+
+/* Carkit Control */
+#define ULPI_CARKIT_CTRL_CARKITPWR		(1 << 0)
+#define ULPI_CARKIT_CTRL_IDGNDDRV		(1 << 1)
+#define ULPI_CARKIT_CTRL_TXDEN			(1 << 2)
+#define ULPI_CARKIT_CTRL_RXDEN			(1 << 3)
+#define ULPI_CARKIT_CTRL_SPKLEFTEN		(1 << 4)
+#define ULPI_CARKIT_CTRL_SPKRIGHTEN		(1 << 5)
+#define ULPI_CARKIT_CTRL_MICEN			(1 << 6)
+
+/* Carkit Interrupt Enable */
+#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE		(1 << 0)
+#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL		(1 << 1)
+#define ULPI_CARKIT_INT_EN_CARINTDET		(1 << 2)
+#define ULPI_CARKIT_INT_EN_DP_RISE		(1 << 3)
+#define ULPI_CARKIT_INT_EN_DP_FALL		(1 << 4)
+
+/* Carkit Interrupt Status and
+ * Carkit Interrupt Latch
+ */
+#define ULPI_CARKIT_INT_IDFLOAT			(1 << 0)
+#define ULPI_CARKIT_INT_CARINTDET		(1 << 1)
+#define ULPI_CARKIT_INT_DP			(1 << 2)
+
+/* Carkit Pulse Control*/
+#define ULPI_CARKIT_PLS_CTRL_TXPLSEN		(1 << 0)
+#define ULPI_CARKIT_PLS_CTRL_RXPLSEN		(1 << 1)
+#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN	(1 << 2)
+#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN	(1 << 3)
+
+/*-------------------------------------------------------------------------*/
+
 struct otg_transceiver *otg_ulpi_create(struct otg_io_access_ops *ops,
 					unsigned int flags);