1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
|
/*
* (C) Copyright 2007 STMicroelectronics, <www.st.com>
* (C) Copyright 2009 Alessandro Rubini <rubini@unipv.it>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <nand.h>
#include <asm/io.h>
static inline int parity(int b) /* b is really a byte; returns 0 or ~0 */
{
__asm__ __volatile__(
"eor %0, %0, %0, lsr #4\n\t"
"eor %0, %0, %0, lsr #2\n\t"
"eor %0, %0, %0, lsr #1\n\t"
"ands %0, %0, #1\n\t"
"subne %0, %0, #2\t"
: "=r" (b) : "0" (b));
return b;
}
/*
* This is the ECC routine used in hardware, according to the manual.
* HW claims to make the calculation but not the correction; so we must
* recalculate the bytes for a comparison.
*/
static int ecc512(const unsigned char *data, unsigned char *ecc)
{
int gpar = 0;
int i, val, par;
int pbits = 0; /* P8, P16, ... P2048 */
int pprime = 0; /* P8', P16', ... P2048' */
int lowbits; /* P1, P2, P4 and primes */
for (i = 0; i < 512; i++) {
par = parity((val = data[i]));
gpar ^= val;
pbits ^= (i & par);
}
/*
* Ok, now gpar is global parity (xor of all bytes)
* pbits are all the parity bits (non-prime ones)
*/
par = parity(gpar);
pprime = pbits ^ par;
/* Put low bits in the right position for ecc[2] (bits 7..2) */
lowbits = 0
| (parity(gpar & 0xf0) & 0x80) /* P4 */
| (parity(gpar & 0x0f) & 0x40) /* P4' */
| (parity(gpar & 0xcc) & 0x20) /* P2 */
| (parity(gpar & 0x33) & 0x10) /* P2' */
| (parity(gpar & 0xaa) & 0x08) /* P1 */
| (parity(gpar & 0x55) & 0x04); /* P1' */
ecc[2] = ~(lowbits | ((pbits & 0x100) >> 7) | ((pprime & 0x100) >> 8));
/* now intermix bits for ecc[1] (P1024..P128') and ecc[0] (P64..P8') */
ecc[1] = ~( (pbits & 0x80) >> 0 | ((pprime & 0x80) >> 1)
| ((pbits & 0x40) >> 1) | ((pprime & 0x40) >> 2)
| ((pbits & 0x20) >> 2) | ((pprime & 0x20) >> 3)
| ((pbits & 0x10) >> 3) | ((pprime & 0x10) >> 4));
ecc[0] = ~( (pbits & 0x8) << 4 | ((pprime & 0x8) << 3)
| ((pbits & 0x4) << 3) | ((pprime & 0x4) << 2)
| ((pbits & 0x2) << 2) | ((pprime & 0x2) << 1)
| ((pbits & 0x1) << 1) | ((pprime & 0x1) << 0));
return 0;
}
/* This is the method in the chip->ecc field */
static int nomadik_ecc_calculate(struct mtd_info *mtd, const uint8_t *dat,
uint8_t *ecc_code)
{
return ecc512(dat, ecc_code);
}
static int nomadik_ecc_correct(struct mtd_info *mtd, uint8_t *dat,
uint8_t *r_ecc, uint8_t *c_ecc)
{
struct nand_chip *chip = mtd->priv;
uint32_t r, c, d, diff; /*read, calculated, xor of them */
if (!memcmp(r_ecc, c_ecc, chip->ecc.bytes))
return 0;
/* Reorder the bytes into ascending-order 24 bits -- see manual */
r = r_ecc[2] << 22 | r_ecc[1] << 14 | r_ecc[0] << 6 | r_ecc[2] >> 2;
c = c_ecc[2] << 22 | c_ecc[1] << 14 | c_ecc[0] << 6 | c_ecc[2] >> 2;
diff = (r ^ c) & ((1<<24)-1); /* use 24 bits only */
/* If 12 bits are different, one per pair, it's correctable */
if (((diff | (diff>>1)) & 0x555555) == 0x555555) {
int bit = ((diff & 2) >> 1)
| ((diff & 0x8) >> 2) | ((diff & 0x20) >> 3);
int byte;
d = diff >> 6; /* remove bit-order info */
byte = ((d & 2) >> 1)
| ((d & 0x8) >> 2) | ((d & 0x20) >> 3)
| ((d & 0x80) >> 4) | ((d & 0x200) >> 5)
| ((d & 0x800) >> 6) | ((d & 0x2000) >> 7)
| ((d & 0x8000) >> 8) | ((d & 0x20000) >> 9);
/* correct the single bit */
dat[byte] ^= 1<<bit;
return 0;
}
/* If 1 bit only differs, it's one bit error in ECC, ignore */
if ((diff ^ (1 << (ffs(diff) - 1))) == 0)
return 0;
/* Otherwise, uncorrectable */
return -1;
}
static void nomadik_ecc_hwctl(struct mtd_info *mtd, int mode)
{ /* mandatory in the structure but not used here */ }
/* This is the layout used by older installations, we keep compatible */
struct nand_ecclayout nomadik_ecc_layout = {
.eccbytes = 3 * 4,
.eccpos = { /* each subpage has 16 bytes: pos 2,3,4 hosts ECC */
0x02, 0x03, 0x04,
0x12, 0x13, 0x14,
0x22, 0x23, 0x24,
0x32, 0x33, 0x34},
.oobfree = { {0x08, 0x08}, {0x18, 0x08}, {0x28, 0x08}, {0x38, 0x08} },
};
#define MASK_ALE (1 << 24) /* our ALE is AD21 */
#define MASK_CLE (1 << 23) /* our CLE is AD22 */
/* This is copied from the AT91SAM9 devices (Stelian Pop, Lead Tech Design) */
static void nomadik_nand_hwcontrol(struct mtd_info *mtd,
int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
u32 pcr0 = readl(REG_FSMC_PCR0);
if (ctrl & NAND_CTRL_CHANGE) {
ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
if (ctrl & NAND_CLE)
IO_ADDR_W |= MASK_CLE;
if (ctrl & NAND_ALE)
IO_ADDR_W |= MASK_ALE;
if (ctrl & NAND_NCE)
writel(pcr0 | 0x4, REG_FSMC_PCR0);
else
writel(pcr0 & ~0x4, REG_FSMC_PCR0);
this->IO_ADDR_W = (void *) IO_ADDR_W;
this->IO_ADDR_R = (void *) IO_ADDR_W;
}
if (cmd != NAND_CMD_NONE)
writeb(cmd, this->IO_ADDR_W);
}
/* Returns 1 when ready; upper layers timeout at 20ms with timer routines */
static int nomadik_nand_ready(struct mtd_info *mtd)
{
return 1; /* The ready bit is handled in hardware */
}
/* Copy a buffer 32bits at a time: faster than defualt method which is 8bit */
static void nomadik_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
int i;
struct nand_chip *chip = mtd->priv;
u32 *p = (u32 *) buf;
len >>= 2;
writel(0, REG_FSMC_ECCR0);
for (i = 0; i < len; i++)
p[i] = readl(chip->IO_ADDR_R);
}
int board_nand_init(struct nand_chip *chip)
{
/* Set up the FSMC_PCR0 for nand access*/
writel(0x0000004a, REG_FSMC_PCR0);
/* Set up FSMC_PMEM0, FSMC_PATT0 with timing data for access */
writel(0x00020401, REG_FSMC_PMEM0);
writel(0x00020404, REG_FSMC_PATT0);
chip->options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING;
chip->cmd_ctrl = nomadik_nand_hwcontrol;
chip->dev_ready = nomadik_nand_ready;
/* The chip allows 32bit reads, so avoid the default 8bit copy */
chip->read_buf = nomadik_nand_read_buf;
/* ECC: follow the hardware-defined rulse, but do it in sw */
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.bytes = 3;
chip->ecc.size = 512;
chip->ecc.layout = &nomadik_ecc_layout;
chip->ecc.calculate = nomadik_ecc_calculate;
chip->ecc.hwctl = nomadik_ecc_hwctl;
chip->ecc.correct = nomadik_ecc_correct;
return 0;
}
|