1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
|
/*
* serial.h - common serial defines for early debug and serial driver.
* any functions defined here must be always_inline since
* initcode cannot have function calls.
*
* Copyright (c) 2004-2007 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#ifndef __BFIN_CPU_SERIAL_H__
#define __BFIN_CPU_SERIAL_H__
#include <asm/blackfin.h>
#include <asm/mach-common/bits/uart.h>
#ifndef CONFIG_UART_CONSOLE
# define CONFIG_UART_CONSOLE 0
#endif
#ifdef CONFIG_DEBUG_EARLY_SERIAL
# define BFIN_DEBUG_EARLY_SERIAL 1
#else
# define BFIN_DEBUG_EARLY_SERIAL 0
#endif
#define LOB(x) ((x) & 0xFF)
#define HIB(x) (((x) >> 8) & 0xFF)
#ifndef UART_LSR
# if (CONFIG_UART_CONSOLE == 3)
# define pUART_DLH pUART3_DLH
# define pUART_DLL pUART3_DLL
# define pUART_GCTL pUART3_GCTL
# define pUART_IER pUART3_IER
# define pUART_IERC pUART3_IER_CLEAR
# define pUART_LCR pUART3_LCR
# define pUART_LSR pUART3_LSR
# define pUART_RBR pUART3_RBR
# define pUART_THR pUART3_THR
# define UART_THR UART3_THR
# define UART_LSR UART3_LSR
# elif (CONFIG_UART_CONSOLE == 2)
# define pUART_DLH pUART2_DLH
# define pUART_DLL pUART2_DLL
# define pUART_GCTL pUART2_GCTL
# define pUART_IER pUART2_IER
# define pUART_IERC pUART2_IER_CLEAR
# define pUART_LCR pUART2_LCR
# define pUART_LSR pUART2_LSR
# define pUART_RBR pUART2_RBR
# define pUART_THR pUART2_THR
# define UART_THR UART2_THR
# define UART_LSR UART2_LSR
# elif (CONFIG_UART_CONSOLE == 1)
# define pUART_DLH pUART1_DLH
# define pUART_DLL pUART1_DLL
# define pUART_GCTL pUART1_GCTL
# define pUART_IER pUART1_IER
# define pUART_IERC pUART1_IER_CLEAR
# define pUART_LCR pUART1_LCR
# define pUART_LSR pUART1_LSR
# define pUART_RBR pUART1_RBR
# define pUART_THR pUART1_THR
# define UART_THR UART1_THR
# define UART_LSR UART1_LSR
# elif (CONFIG_UART_CONSOLE == 0)
# define pUART_DLH pUART0_DLH
# define pUART_DLL pUART0_DLL
# define pUART_GCTL pUART0_GCTL
# define pUART_IER pUART0_IER
# define pUART_IERC pUART0_IER_CLEAR
# define pUART_LCR pUART0_LCR
# define pUART_LSR pUART0_LSR
# define pUART_RBR pUART0_RBR
# define pUART_THR pUART0_THR
# define UART_THR UART0_THR
# define UART_LSR UART0_LSR
# endif
#endif
#ifndef __ASSEMBLY__
/* We cannot use get_sclk() in initcode as it is defined elsewhere. */
#ifdef BFIN_IN_INITCODE
# define get_sclk() (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV)
#endif
#ifdef __ADSPBF54x__
# define ACCESS_LATCH()
# define ACCESS_PORT_IER()
# define CLEAR_IER() (*pUART_IERC = 0)
#else
# define ACCESS_LATCH() (*pUART_LCR |= DLAB)
# define ACCESS_PORT_IER() (*pUART_LCR &= ~DLAB)
# define CLEAR_IER() (*pUART_IER = 0)
#endif
__attribute__((always_inline))
static inline void serial_do_portmux(void)
{
#if defined(__ADSPBF51x__)
# define DO_MUX(port, mux_tx, mux_rx, tx, rx) \
bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_2 | PORT_x_MUX_##mux_rx##_FUNC_2); \
bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx);
switch (CONFIG_UART_CONSOLE) {
case 0: DO_MUX(G, 5, 5, 9, 10); break; /* Port G; mux 5; PG9 and PG10 */
case 1: DO_MUX(F, 2, 3, 14, 15); break; /* Port H; mux 2/3; PH14 and PH15 */
}
SSYNC();
#elif defined(__ADSPBF52x__)
# define DO_MUX(port, mux, tx, rx) \
bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_3); \
bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx);
switch (CONFIG_UART_CONSOLE) {
case 0: DO_MUX(G, 2, 7, 8); break; /* Port G; mux 2; PG2 and PG8 */
case 1: DO_MUX(F, 5, 14, 15); break; /* Port F; mux 5; PF14 and PF15 */
}
SSYNC();
#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__)
# define DO_MUX(func, tx, rx) \
bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~(func)); \
bfin_write_PORTF_FER(bfin_read_PORTF_FER() | PF##tx | PF##rx);
switch (CONFIG_UART_CONSOLE) {
case 0: DO_MUX(PFDE, 0, 1); break;
case 1: DO_MUX(PFTE, 2, 3); break;
}
SSYNC();
#elif defined(__ADSPBF54x__)
# define DO_MUX(port, tx, rx) \
bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##tx##_MASK | PORT_x_MUX_##rx##_MASK)) | PORT_x_MUX_##tx##_FUNC_1 | PORT_x_MUX_##rx##_FUNC_1); \
bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx);
switch (CONFIG_UART_CONSOLE) {
case 0: DO_MUX(E, 7, 8); break; /* Port E; PE7 and PE8 */
case 1: DO_MUX(H, 0, 1); break; /* Port H; PH0 and PH1 */
case 2: DO_MUX(B, 4, 5); break; /* Port B; PB4 and PB5 */
case 3: DO_MUX(B, 6, 7); break; /* Port B; PB6 and PB7 */
}
SSYNC();
#endif
}
__attribute__((always_inline))
static inline void serial_early_init(void)
{
/* handle portmux crap on different Blackfins */
serial_do_portmux();
/* Enable UART */
*pUART_GCTL = UCEN;
/* Set LCR to Word Lengh 8-bit word select */
*pUART_LCR = WLS_8;
SSYNC();
}
__attribute__((always_inline))
static inline void serial_early_put_div(uint16_t divisor)
{
/* Set DLAB in LCR to Access DLL and DLH */
ACCESS_LATCH();
SSYNC();
/* Program the divisor to get the baud rate we want */
*pUART_DLL = LOB(divisor);
*pUART_DLH = HIB(divisor);
SSYNC();
/* Clear DLAB in LCR to Access THR RBR IER */
ACCESS_PORT_IER();
SSYNC();
}
__attribute__((always_inline))
static inline uint16_t serial_early_get_div(void)
{
/* Set DLAB in LCR to Access DLL and DLH */
ACCESS_LATCH();
SSYNC();
uint8_t dll = *pUART_DLL;
uint8_t dlh = *pUART_DLH;
uint16_t divisor = (dlh << 8) | dll;
/* Clear DLAB in LCR to Access THR RBR IER */
ACCESS_PORT_IER();
SSYNC();
return divisor;
}
__attribute__((always_inline))
static inline void serial_early_set_baud(uint32_t baud)
{
/* Translate from baud into divisor in terms of SCLK. The
* weird multiplication is to make sure we over sample just
* a little rather than under sample the incoming signals.
*/
serial_early_put_div((get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230);
}
#ifndef BFIN_IN_INITCODE
__attribute__((always_inline))
static inline void serial_early_puts(const char *s)
{
if (BFIN_DEBUG_EARLY_SERIAL) {
serial_puts("Early: ");
serial_puts(s);
}
}
#endif
#else
.macro serial_early_init
#ifdef CONFIG_DEBUG_EARLY_SERIAL
call _serial_initialize;
#endif
.endm
.macro serial_early_set_baud
#ifdef CONFIG_DEBUG_EARLY_SERIAL
R0.L = LO(CONFIG_BAUDRATE);
R0.H = HI(CONFIG_BAUDRATE);
call _serial_set_baud;
#endif
.endm
/* Since we embed the string right into our .text section, we need
* to find its address. We do this by getting our PC and adding 2
* bytes (which is the length of the jump instruction). Then we
* pass this address to serial_puts().
*/
#ifdef CONFIG_DEBUG_EARLY_SERIAL
# define serial_early_puts(str) \
call _get_pc; \
jump 1f; \
.ascii "Early:"; \
.ascii __FILE__; \
.ascii ": "; \
.ascii str; \
.asciz "\n"; \
.align 4; \
1: \
R0 += 2; \
call _serial_puts;
#else
# define serial_early_puts(str)
#endif
#endif
#endif
|
