1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
|
/*
* (C) Copyright 2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mpc5xxx.h>
/* For the V38B board the pin is GPIO_PSC_6 */
#define GPIO_PIN GPIO_PSC6_0
#define NO_ERROR 0
#define ERR_NO_NUMBER 1
#define ERR_BAD_NUMBER 2
static int is_high(void);
static int check_device(void);
static void io_out(int value);
static void io_input(void);
static void io_output(void);
static void init_gpio(void);
static void read_byte(unsigned char *data);
static void write_byte(unsigned char command);
void read_2501_memory(unsigned char *psernum, unsigned char *perr);
void board_get_enetaddr(uchar *enetaddr);
static int is_high()
{
return (*((vu_long *) MPC5XXX_WU_GPIO_DATA_I) & GPIO_PIN);
}
static void io_out(int value)
{
if (value)
*((vu_long *) MPC5XXX_WU_GPIO_DATA_O) |= GPIO_PIN;
else
*((vu_long *) MPC5XXX_WU_GPIO_DATA_O) &= ~GPIO_PIN;
}
static void io_input()
{
*((vu_long *) MPC5XXX_WU_GPIO_DIR) &= ~GPIO_PIN;
udelay(3); /* allow input to settle */
}
static void io_output()
{
*((vu_long *) MPC5XXX_WU_GPIO_DIR) |= GPIO_PIN;
}
static void init_gpio()
{
*((vu_long *) MPC5XXX_WU_GPIO_ENABLE) |= GPIO_PIN; /* Enable appropriate pin */
}
void read_2501_memory(unsigned char *psernum, unsigned char *perr)
{
#define NBYTES 28
unsigned char crcval, i;
unsigned char buf[NBYTES];
*perr = 0;
crcval = 0;
for (i = 0; i < NBYTES; i++)
buf[i] = 0;
if (!check_device())
*perr = ERR_NO_NUMBER;
else {
*perr = NO_ERROR;
write_byte(0xCC); /* skip ROM (0xCC) */
write_byte(0xF0); /* Read memory command 0xF0 */
write_byte(0x00); /* Address TA1=0, TA2=0 */
write_byte(0x00);
read_byte(&crcval); /* Read CRC of address and command */
for (i = 0; i < NBYTES; i++)
read_byte(&buf[i]);
}
if (strncmp((const char *) &buf[11], "MAREL IEEE 802.3", 16)) {
*perr = ERR_BAD_NUMBER;
psernum[0] = 0x00;
psernum[1] = 0xE0;
psernum[2] = 0xEE;
psernum[3] = 0xFF;
psernum[4] = 0xFF;
psernum[5] = 0xFF;
} else {
psernum[0] = 0x00;
psernum[1] = 0xE0;
psernum[2] = 0xEE;
psernum[3] = buf[7];
psernum[4] = buf[6];
psernum[5] = buf[5];
}
}
static int check_device()
{
int found;
io_output();
io_out(0);
udelay(500); /* must be at least 480 us low pulse */
io_input();
udelay(60);
found = (is_high() == 0) ? 1 : 0;
udelay(500); /* must be at least 480 us low pulse */
return found;
}
static void write_byte(unsigned char command)
{
char i;
for (i = 0; i < 8; i++) {
/* 1 us to 15 us low pulse starts bit slot */
/* Start with high pulse for 3 us */
io_input();
udelay(3);
io_out(0);
io_output();
udelay(3);
if (command & 0x01) {
/* 60 us high for 1-bit */
io_input();
udelay(60);
} else
/* 60 us low for 0-bit */
udelay(60);
/* Leave pin as input */
io_input();
command = command >> 1;
}
}
static void read_byte(unsigned char *data)
{
unsigned char i, rdat = 0;
for (i = 0; i < 8; i++) {
/* read one bit from one-wire device */
/* 1 - 15 us low starts bit slot */
io_out(0);
io_output();
udelay(0);
/* allow line to be pulled high */
io_input();
/* delay 10 us */
udelay(10);
/* now sample input status */
if (is_high())
rdat = (rdat >> 1) | 0x80;
else
rdat = rdat >> 1;
udelay(60); /* at least 60 us */
}
/* copy the return value */
*data = rdat;
}
void board_get_enetaddr(uchar *enetaddr)
{
unsigned char sn[6], err = NO_ERROR;
init_gpio();
read_2501_memory(sn, &err);
if (err == NO_ERROR) {
sprintf((char *)enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
sn[0], sn[1], sn[2], sn[3], sn[4], sn[5]);
printf("MAC address: %s\n", enetaddr);
setenv("ethaddr", (char *)enetaddr);
} else {
sprintf((char *)enetaddr, "00:01:02:03:04:05");
printf("Error reading MAC address.\n");
printf("Setting default to %s\n", enetaddr);
setenv("ethaddr", (char *)enetaddr);
}
}
|