summaryrefslogtreecommitdiffstats
path: root/board/pm854/init.S
blob: ade5d6e5b61b1919475efd66b06a2bdd8ebf611f (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
/*
 * Copyright 2004 Freescale Semiconductor.
 * Copyright (C) 2002,2003, Motorola Inc.
 * Xianghua Xiao <X.Xiao@motorola.com>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#include <config.h>
#include <mpc85xx.h>


/*
 * TLB0 and TLB1 Entries
 *
 * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
 * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
 * these TLB entries are established.
 *
 * The TLB entries for DDR are dynamically setup in spd_sdram()
 * and use TLB1 Entries 8 through 15 as needed according to the
 * size of DDR memory.
 *
 * MAS0: tlbsel, esel, nv
 * MAS1: valid, iprot, tid, ts, tsize
 * MAS2: epn, sharen, x0, x1, w, i, m, g, e
 * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
 */

#define	entry_start \
	mflr	r1 	;	\
	bl	0f 	;

#define	entry_end \
0:	mflr	r0	;	\
	mtlr	r1	;	\
	blr		;


	.section	.bootpg, "ax"
	.globl	tlb1_entry
tlb1_entry:
	entry_start

	/*
	 * Number of TLB0 and TLB1 entries in the following table
	 */
	.long 13

#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
	/*
	 * TLB0		4K	Non-cacheable, guarded
	 * 0xff700000	4K	Initial CCSRBAR mapping
	 *
	 * This ends up at a TLB0 Index==0 entry, and must not collide
	 * with other TLB0 Entries.
	 */
	.long TLB1_MAS0(0, 0, 0)
	.long TLB1_MAS1(1, 0, 0, 0, 0)
	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
#else
#error("Update the number of table entries in tlb1_entry")
#endif

	/*
	 * TLB0		16K	Cacheable, non-guarded
	 * 0xd001_0000	16K	Temporary Global data for initialization
	 *
	 * Use four 4K TLB0 entries.  These entries must be cacheable
	 * as they provide the bootstrap memory before the memory
	 * controler and real memory have been configured.
	 *
	 * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
	 * and must not collide with other TLB0 entries.
	 */
	.long TLB1_MAS0(0, 0, 0)
	.long TLB1_MAS1(1, 0, 0, 0, 0)
	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
			0,0,0,0,0,0,0,0)
	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
			0,0,0,0,0,1,0,1,0,1)

	.long TLB1_MAS0(0, 0, 0)
	.long TLB1_MAS1(1, 0, 0, 0, 0)
	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
			0,0,0,0,0,0,0,0)
	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
			0,0,0,0,0,1,0,1,0,1)

	.long TLB1_MAS0(0, 0, 0)
	.long TLB1_MAS1(1, 0, 0, 0, 0)
	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
			0,0,0,0,0,0,0,0)
	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
			0,0,0,0,0,1,0,1,0,1)

	.long TLB1_MAS0(0, 0, 0)
	.long TLB1_MAS1(1, 0, 0, 0, 0)
	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
			0,0,0,0,0,0,0,0)
	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
			0,0,0,0,0,1,0,1,0,1)


	/*
	 * TLB 0:	64M	Non-cacheable, guarded
	 * 0xfc000000	64M	FLASH (8,16,32 or 64 MB)
	 * Out of reset this entry is only 4K.
	 */
	.long TLB1_MAS0(1, 0, 0)
	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
	.long TLB1_MAS2(E500_TLB_EPN(0xfc000000), 0,0,0,0,1,0,1,0)
	.long TLB1_MAS3(E500_TLB_RPN(0xfc000000), 0,0,0,0,0,1,0,1,0,1)

	/*
	 * TLB 1:	256M	Non-cacheable, guarded
	 * 0x80000000	256M	PCI1 MEM First half
	 */
	.long TLB1_MAS0(1, 1, 0)
	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)

	/*
	 * TLB 2:	256M	Non-cacheable, guarded
	 * 0x90000000	256M	PCI1 MEM Second half
	 */
	.long TLB1_MAS0(1, 2, 0)
	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
			0,0,0,0,1,0,1,0)
	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
			0,0,0,0,0,1,0,1,0,1)

	/*
	 * TLB 3:	256M	Non-cacheable, guarded
	 * 0xc0000000	256M	Rapid IO MEM First half
	 */
	.long TLB1_MAS0(1, 3, 0)
	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
	.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE), 0,0,0,0,1,0,1,0)
	.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)

	/*
	 * TLB 4:	256M	Non-cacheable, guarded
	 * 0xd0000000	256M	Rapid IO MEM Second half
	 */
	.long TLB1_MAS0(1, 4, 0)
	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
	.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE + 0x10000000),
			0,0,0,0,1,0,1,0)
	.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE + 0x10000000),
			0,0,0,0,0,1,0,1,0,1)

	/*
	 * TLB 5:	64M	Non-cacheable, guarded
	 * 0xe000_0000	1M	CCSRBAR
	 * 0xe200_0000	16M	PCI1 IO
	 */
	.long TLB1_MAS0(1, 5, 0)
	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)

	/*
	 * TLB 6:	64M	Cacheable, non-guarded
	 * 0xf000_0000	64M	LBC SDRAM
	 */
	.long TLB1_MAS0(1, 6, 0)
	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)

#if !defined(CONFIG_SPD_EEPROM)
	/*
	 * TLB 7:	256M	DDR
	 * 0x00000000	256M	DDR System memory
	 * Without SPD EEPROM configured DDR, this must be setup manually.
	 * Make sure the TLB count at the top of this table is correct.
	 * Likely it needs to be increased by two for these entries.
	 */

	.long TLB1_MAS0(1, 7, 0)
	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
	.long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,0,0,0)
	.long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
#endif

	entry_end

/*
 * LAW(Local Access Window) configuration:
 *
 * 0x0000_0000     0x7fff_ffff     DDR                     2G
 * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
 * 0xc000_0000     0xdfff_ffff     RapidIO                 512M
 * 0xe000_0000     0xe000_ffff     CCSR                    1M
 * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
 * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
 * 0xf800_0000     0xf80f_ffff     BCSR                    1M
 * 0xfc00_0000     0xffff_ffff     FLASH (boot bank)       64M
 *
 * Notes:
 *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
 *    If flash is 8M at default position (last 8M), no LAW needed.
 */

#if !defined(CONFIG_SPD_EEPROM)
#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
#define LAWAR0	(LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_256M))
#else
#define LAWBAR0 0
#define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
#endif

#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
#define LAWAR1	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))

/*
 * This is not so much the SDRAM map as it is the whole localbus map.
 */
#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
#define LAWAR2	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))

#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
#define LAWAR3	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))

/*
 * Rapid IO at 0xc000_0000 for 512 M
 */
#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
#define LAWAR4	(LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))


	.section .bootpg, "ax"
	.globl	law_entry
law_entry:
	entry_start
	.long 0x05
	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
	.long LAWBAR4,LAWAR4
	entry_end
OpenPOWER on IntegriCloud