summaryrefslogtreecommitdiffstats
path: root/board/ms7750se/lowlevel_init.S
blob: d3e3cd5e8d0be337d2a6cbe30723877eef435a85 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
/*
 modified from SH-IPL+g
 Renesaso SuperH / Solution Enginge MS775xSE01 BSC setting.

 Support CPU : SH7750/SH7750S/SH7750R/SH7751/SH7751R

 Coyright (c) 2007 Nobuhiro Iwamatsu <iwmatsu@nigauri.org>

 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
*/

#include <config.h>
#include <version.h>

#include <asm/processor.h>

#ifdef CONFIG_CPU_SH7751
#define BCR2_D_VALUE	0x2FFC	   /* Area 1-6 width: 32/32/32/32/32/16 */
#define WCR1_D_VALUE    0x02770771 /* DMA:0 A6:2 A3:0 A0:1 Others:15 */
#ifdef CONFIG_MARUBUN_PCCARD
#define WCR2_D_VALUE    0xFFFE4FE7 /* A6:15 A6B:7 A5:15 A5B:7 A4:15
				      A3:2  A2:15 A1:15 A0:6  A0B:7  */
#else /* CONFIG_MARUBUN_PCCARD */
#define WCR2_D_VALUE    0x7FFE4FE7 /* A6:3  A6B:7 A5:15 A5B:7 A4:15
				      A3:2  A2:15 A1:15 A0:6  A0B:7  */
#endif /* CONFIG_MARUBUN_PCCARD */
#define WCR3_D_VALUE	0x01777771 /* A6: 0-1 A5: 1-3 A4: 1-3 A3: 1-3
				      A2: 1-3 A1: 1-3 A0: 0-1 */
#define RTCOR_D_VALUE	0xA50D	   /* Write code A5, data 0D (~15us?) */
#define SDMR3_ADDRESS	0xFF940088 /* SDMR3 address on 32-bit bus */
#define MCR_D1_VALUE	0x100901B4 /* SDRAM 32-bit, CAS/RAS Refresh, ... */
#define MCR_D2_VALUE	0x500901B4 /* Same w/MRSET now 1 (mode reg cmd) */
#else /* CONFIG_CPU_SH7751 */
#define BCR2_D_VALUE	0x2E3C	   /* Area 1-6 width: 32/32/64/16/32/16 */
#define WCR1_D_VALUE	0x02720777 /* DMA:0 A6:2 A4:2 A3:0 Others:15 */
#define WCR2_D_VALUE	0xFFFE4FFF /* A6:15 A6B:7 A5:15 A5B:7 A4:15
				      A3:2  A2:15 A1:15 A0:15 A0B:7  */
#define WCR3_D_VALUE	0x01717771 /* A6: 0-1 A5: 1-3 A4: 0-1 A3: 1-3
				      A2: 1-3 A1: 1-3 A0: 0-1 */
#define RTCOR_D_VALUE	0xA510	   /* Write code A5, data 10 (~15us?) */
#define SDMR3_ADDRESS	0xFF940110 /* SDMR3 address on 64-bit bus */
#define MCR_D1_VALUE	0x8801001C /* SDRAM 64-bit, CAS/RAS Refresh, ... */
#define MCR_D2_VALUE	0xC801001C /* Same w/MRSET now 1 (mode reg cmd) */
#endif /* CONFIG_CPU_SH7751 */

	.global lowlevel_init
	.text
	.align  2

lowlevel_init:

	mov.l   CCR_A, r1               ! CCR Address
	mov.l   CCR_D_DISABLE, r0       ! CCR Data
	mov.l   r0, @r1

init_bsc:
	mov.l	FRQCR_A,r1	/* FRQCR Address */
	mov.l	FRQCR_D,r0	/* FRQCR Data */
	mov.w	r0,@r1

	mov.l	BCR1_A,r1	/* BCR1 Address */
	mov.l	BCR1_D,r0	/* BCR1 Data */
	mov.l	r0,@r1

	mov.l	BCR2_A,r1	/* BCR2 Address */
	mov.l	BCR2_D,r0	/* BCR2 Data */
	mov.w	r0,@r1

	mov.l	WCR1_A,r1	/* WCR1 Address */
	mov.l	WCR1_D,r0	/* WCR1 Data */
	mov.l	r0,@r1

	mov.l	WCR2_A,r1	/* WCR2 Address */
	mov.l	WCR2_D,r0	/* WCR2 Data */
	mov.l	r0,@r1

	mov.l	WCR3_A,r1	/* WCR3 Address */
	mov.l	WCR3_D,r0	/* WCR3 Data */
	mov.l	r0,@r1

	mov.l	MCR_A,r1	/* MCR Address */
	mov.l	MCR_D1,r0	/* MCR Data1 */
	mov.l	r0,@r1

	mov.l	SDMR3_A,r1	/* Set SDRAM mode */
	mov	#0,r0
	mov.b	r0,@r1

	! Do you need PCMCIA setting?
	! If so, please add the lines here...

	mov.l	RTCNT_A,r1	/* RTCNT Address */
	mov.l	RTCNT_D,r0	/* RTCNT Data */
	mov.w	r0,@r1

	mov.l	RTCOR_A,r1	/* RTCOR Address */
	mov.l	RTCOR_D,r0	/* RTCOR Data */
	mov.w	r0,@r1

	mov.l	RTCSR_A,r1	/* RTCSR Address */
	mov.l	RTCSR_D,r0	/* RTCSR Data */
	mov.w	r0,@r1

	mov.l	RFCR_A,r1	/* RFCR Address */
	mov.l	RFCR_D,r0	/* RFCR Data */
	mov.w	r0,@r1		/* Clear reflesh counter */
	/* Wait DRAM refresh 30 times */
	mov	#30,r3
1:
	mov.w	@r1,r0
	extu.w	r0,r2
	cmp/hi	r3,r2
	bf	1b

	mov.l	MCR_A,r1	/* MCR Address */
	mov.l	MCR_D2,r0	/* MCR Data2 */
	mov.l	r0,@r1

	mov.l	SDMR3_A,r1	/* Set SDRAM mode */
	mov	#0,r0
	mov.b	r0,@r1

	rts
	 nop

	.align	2

CCR_A:          .long   CCR
CCR_D_DISABLE:  .long   0x0808
FRQCR_A:	.long	FRQCR
FRQCR_D:
#ifdef CONFIG_CPU_TYPE_R
		.long	0x00000e1a	/* 12:3:3 */
#else	/* CONFIG_CPU_TYPE_R */
#ifdef CONFIG_GOOD_SESH4
		.long	0x00000e13	/* 6:2:1 */
#else
		.long	0x00000e23	/* 6:1:1 */
#endif
#endif	/* CONFIG_CPU_TYPE_R */

BCR1_A:		.long	BCR1
BCR1_D:		.long	0x00000008	/* Area 3 SDRAM */
BCR2_A:		.long	BCR2
BCR2_D:		.long	BCR2_D_VALUE	/* Bus width settings */
WCR1_A:		.long	WCR1
WCR1_D:		.long	WCR1_D_VALUE	/* Inter-area or turnaround wait states */
WCR2_A:		.long	WCR2
WCR2_D:		.long	WCR2_D_VALUE	/* Per-area access and burst wait states */
WCR3_A:		.long	WCR3
WCR3_D:		.long	WCR3_D_VALUE	/* Address setup and data hold cycles */
RTCSR_A:	.long	RTCSR
RTCSR_D:	.long	0xA518		/* RTCSR Write Code A5h Data 18h */
RTCNT_A:	.long	RTCNT
RTCNT_D:	.long	0xA500		/* RTCNT Write Code A5h Data 00h */
RTCOR_A:	.long	RTCOR
RTCOR_D:	.long	RTCOR_D_VALUE	/* Set refresh time (about 15us) */
SDMR3_A:	.long	SDMR3_ADDRESS
MCR_A:		.long	MCR
MCR_D1:		.long	MCR_D1_VALUE
MCR_D2:		.long	MCR_D2_VALUE
RFCR_A:		.long	RFCR
RFCR_D:		.long	0xA400		/* RFCR Write Code A4h Data 00h */
OpenPOWER on IntegriCloud