1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
|
/*
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <s6e63d6.h>
#include <netdev.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1,
PHYS_SDRAM_1_SIZE);
return 0;
}
int board_init(void)
{
gd->bd->bi_arch_number = MACH_TYPE_PCM037; /* board id for linux */
gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */
return 0;
}
int board_early_init_f(void)
{
/* CS0: Nor Flash */
static const struct mxc_weimcs cs0 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 15, 0, 0, 3),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(1, 0, 0, 0, 0, 1, 5, 0, 0, 0, 1, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(0, 0, 7, 2, 0, 0, 2, 1, 0, 0, 0, 0, 0, 0)
};
/* CS1: Network Controller */
static const struct mxc_weimcs cs1 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 31, 0, 0, 6),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(4, 4, 4, 10, 4, 0, 5, 4, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(4, 4, 4, 4, 0, 1, 4, 3, 0, 0, 0, 0, 1, 0)
};
/* CS4: SRAM */
static const struct mxc_weimcs cs4 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 24, 0, 4, 3),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(2, 2, 2, 5, 2, 0, 5, 2, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(2, 2, 2, 2, 0, 0, 2, 2, 0, 0, 0, 0, 0, 0)
};
mxc_setup_weimcs(0, &cs0);
mxc_setup_weimcs(1, &cs1);
mxc_setup_weimcs(4, &cs4);
/* setup pins for UART1 */
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
/* setup pins for I2C2 (for EEPROM, RTC) */
mx31_gpio_mux(MUX_CSPI2_MOSI__I2C2_SCL);
mx31_gpio_mux(MUX_CSPI2_MISO__I2C2_SDA);
return 0;
}
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
#ifdef CONFIG_S6E63D6
struct s6e63d6 data = {
/*
* See comment in mxc_spi.c::decode_cs() for .cs field format.
* We use GPIO 57 as a chipselect for the S6E63D6 and chipselect
* 2 of the SPI controller #1, since it is unused.
*/
.cs = 2 | (57 << 8),
.bus = 0,
.id = 0,
};
int ret;
/* SPI1 */
mx31_gpio_mux(MUX_CSPI1_SCLK__CSPI1_CLK);
mx31_gpio_mux(MUX_CSPI1_SPI_RDY__CSPI1_DATAREADY_B);
mx31_gpio_mux(MUX_CSPI1_MOSI__CSPI1_MOSI);
mx31_gpio_mux(MUX_CSPI1_MISO__CSPI1_MISO);
mx31_gpio_mux(MUX_CSPI1_SS0__CSPI1_SS0_B);
mx31_gpio_mux(MUX_CSPI1_SS1__CSPI1_SS1_B);
mx31_gpio_mux(MUX_CSPI1_SS2__CSPI1_SS2_B);
/* start SPI1 clock */
__REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 2);
/* GPIO 57 */
/* sw_mux_ctl_key_col4_key_col5_key_col6_key_col7 */
mx31_gpio_mux(IOMUX_MODE(0x63, MUX_CTL_GPIO));
/* SPI1 CS2 is free */
ret = s6e63d6_init(&data);
if (ret)
return ret;
/*
* This is a "magic" sequence to initialise a C0240QGLA / C0283QGLC
* OLED display connected to a S6E63D6 SPI display controller in the
* 18 bit RGB mode
*/
s6e63d6_index(&data, 2);
s6e63d6_param(&data, 0x0182);
s6e63d6_index(&data, 3);
s6e63d6_param(&data, 0x8130);
s6e63d6_index(&data, 0x10);
s6e63d6_param(&data, 0x0000);
s6e63d6_index(&data, 5);
s6e63d6_param(&data, 0x0001);
s6e63d6_index(&data, 0x22);
#endif
return 0;
}
#endif
int checkboard (void)
{
printf("Board: Phytec phyCore i.MX31\n");
return 0;
}
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_SMC911X
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
#endif
return rc;
}
|
