1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
|
/*
* (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
* (C) Copyright 2009 Dave Srl www.dave.eu
* (C) Copyright 2009 Stefan Roese <sr@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#include <common.h>
#include <asm/bitops.h>
#include <command.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/mpc512x.h>
#include <fdt_support.h>
DECLARE_GLOBAL_DATA_PTR;
/* Clocks in use */
#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
CLOCK_SCCR1_LPC_EN | \
CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \
CLOCK_SCCR1_PSCFIFO_EN | \
CLOCK_SCCR1_DDR_EN | \
CLOCK_SCCR1_FEC_EN | \
CLOCK_SCCR1_NFC_EN | \
CLOCK_SCCR1_PCI_EN | \
CLOCK_SCCR1_TPR_EN)
#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \
CLOCK_SCCR2_I2C_EN)
int eeprom_write_enable(unsigned dev_addr, int state)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
if (dev_addr != CONFIG_SYS_I2C_EEPROM_ADDR)
return -1;
if (state == 0)
setbits_be32(&im->gpio.gpdat, 0x00100000);
else
clrbits_be32(&im->gpio.gpdat, 0x00100000);
return 0;
}
int board_early_init_f(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 spridr;
int i;
/*
* Initialize Local Window for NOR FLASH access
*/
out_be32(&im->sysconf.lpcs0aw,
CSAW_START(CONFIG_SYS_FLASH_BASE) |
CSAW_STOP(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE));
sync_law(&im->sysconf.lpcs0aw);
/*
* Initialize Local Window for boot access
*/
out_be32(&im->sysconf.lpbaw,
CSAW_START(0xffb00000) | CSAW_STOP(0xffb00000, 0x00010000));
sync_law(&im->sysconf.lpbaw);
/*
* Initialize Local Window for VPC3 access
*/
out_be32(&im->sysconf.lpcs1aw,
CSAW_START(CONFIG_SYS_VPC3_BASE) |
CSAW_STOP(CONFIG_SYS_VPC3_BASE, CONFIG_SYS_VPC3_SIZE));
sync_law(&im->sysconf.lpcs1aw);
/*
* Configure Flash Speed
*/
out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG);
/*
* Configure VPC3 Speed
*/
out_be32(&im->lpc.cs_cfg[1], CONFIG_SYS_CS1_CFG);
spridr = in_be32(&im->sysconf.spridr);
if (SVR_MJREV(spridr) >= 2)
out_be32(&im->lpc.altr, CONFIG_SYS_CS_ALETIMING);
/*
* Enable clocks
*/
out_be32(&im->clk.sccr[0], SCCR1_CLOCKS_EN);
out_be32(&im->clk.sccr[1], SCCR2_CLOCKS_EN);
#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE)
setbits_be32(&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN);
#endif
/*
* Configure MSCAN clocks
*/
for (i=0; i<4; ++i) {
out_be32(&im->clk.msccr[i], 0x00300000);
out_be32(&im->clk.msccr[i], 0x00310000);
}
/*
* Configure GPIO's
*/
clrbits_be32(&im->gpio.gpodr, 0x000000e0);
clrbits_be32(&im->gpio.gpdir, 0x00ef0000);
setbits_be32(&im->gpio.gpdir, 0x001000e0);
setbits_be32(&im->gpio.gpdat, 0x00100000);
return 0;
}
phys_size_t initdram(int board_type)
{
return get_ram_size(0, fixed_sdram(NULL, NULL, 0));
}
int misc_init_r(void)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 val;
/*
* Optimize access to profibus chip (VPC3) on the local bus
*/
/*
* Select 1:1 for LPC_DIV
*/
val = in_be32(&im->clk.scfr[0]) & ~SCFR1_LPC_DIV_MASK;
out_be32(&im->clk.scfr[0], val | (0x1 << SCFR1_LPC_DIV_SHIFT));
/*
* Configure LPC Chips Select Deadcycle Control Register
* CS0 - device can drive data 2 clock cycle(s) after CS deassertion
* CS1 - device can drive data 1 clock cycle(s) after CS deassertion
*/
clrbits_be32(&im->lpc.cs_dccr, 0x000000ff);
setbits_be32(&im->lpc.cs_dccr, (0x00 << 4) | (0x01 << 0));
/*
* Configure LPC Chips Select Holdcycle Control Register
* CS0 - data is valid 2 clock cycle(s) after CS deassertion
* CS1 - data is valid 1 clock cycle(s) after CS deassertion
*/
clrbits_be32(&im->lpc.cs_hccr, 0x000000ff);
setbits_be32(&im->lpc.cs_hccr, (0x00 << 4) | (0x01 << 0));
return 0;
}
static iopin_t ioregs_init[] = {
/* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
{
offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC1=FEC_COL Sets Next 15 to FEC pads */
{
offsetof(struct ioctrl512x, io_control_psc0_0), 15, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC1=SELECT LPC_CS1 */
{
offsetof(struct ioctrl512x, io_control_lpc_cs1), 1, 0,
IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=SELECT PSC5_2 */
{
offsetof(struct ioctrl512x, io_control_psc5_2), 1, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=SELECT PSC5_3 */
{
offsetof(struct ioctrl512x, io_control_psc5_3), 1, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=SELECT PSC7_3 */
{
offsetof(struct ioctrl512x, io_control_psc7_3), 1, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=SELECT PSC9_0 */
{
offsetof(struct ioctrl512x, io_control_psc9_0), 3, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=SELECT PSC10_0 */
{
offsetof(struct ioctrl512x, io_control_psc10_0), 3, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=SELECT PSC10_3 */
{
offsetof(struct ioctrl512x, io_control_psc10_3), 1, 0,
IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=SELECT PSC11_0 */
{
offsetof(struct ioctrl512x, io_control_psc11_0), 4, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC0=SELECT IRQ0 */
{
offsetof(struct ioctrl512x, io_control_irq0), 4, 0,
IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
}
};
static iopin_t rev2_silicon_pci_ioregs_init[] = {
/* FUNC0=PCI Sets next 54 to PCI pads */
{
offsetof(struct ioctrl512x, io_control_pci_ad31), 54, 0,
IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_DS(0)
}
};
int checkboard(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 spridr;
puts("Board: MECP_5123\n");
/*
* Initialize function mux & slew rate IO inter alia on IO
* Pins
*/
iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init));
spridr = in_be32(&im->sysconf.spridr);
if (SVR_MJREV(spridr) >= 2)
iopin_initialize(rev2_silicon_pci_ioregs_init, 1);
return 0;
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
|
