1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
|
/*
* Jz4740 UART support
* Copyright (c) 2011
* Qi Hardware, Xiangfu Liu <xiangfu@sharism.cc>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <common.h>
#include <asm/io.h>
#include <asm/jz4740.h>
/*
* serial_init - initialize a channel
*
* This routine initializes the number of data bits, parity
* and set the selected baud rate. Interrupts are disabled.
* Set the modem control signals if the option is selected.
*
* RETURNS: N/A
*/
struct jz4740_uart *uart = (struct jz4740_uart *)CONFIG_SYS_UART_BASE;
int serial_init(void)
{
/* Disable port interrupts while changing hardware */
writeb(0, &uart->dlhr_ier);
/* Disable UART unit function */
writeb(~UART_FCR_UUE, &uart->iir_fcr);
/* Set both receiver and transmitter in UART mode (not SIR) */
writeb(~(SIRCR_RSIRE | SIRCR_TSIRE), &uart->isr);
/*
* Set databits, stopbits and parity.
* (8-bit data, 1 stopbit, no parity)
*/
writeb(UART_LCR_WLEN_8 | UART_LCR_STOP_1, &uart->lcr);
/* Set baud rate */
serial_setbrg();
/* Enable UART unit, enable and clear FIFO */
writeb(UART_FCR_UUE | UART_FCR_FE | UART_FCR_TFLS | UART_FCR_RFLS,
&uart->iir_fcr);
return 0;
}
void serial_setbrg(void)
{
u32 baud_div, tmp;
baud_div = CONFIG_SYS_EXTAL / 16 / CONFIG_BAUDRATE;
tmp = readb(&uart->lcr);
tmp |= UART_LCR_DLAB;
writeb(tmp, &uart->lcr);
writeb((baud_div >> 8) & 0xff, &uart->dlhr_ier);
writeb(baud_div & 0xff, &uart->rbr_thr_dllr);
tmp &= ~UART_LCR_DLAB;
writeb(tmp, &uart->lcr);
}
int serial_tstc(void)
{
if (readb(&uart->lsr) & UART_LSR_DR)
return 1;
return 0;
}
void serial_putc(const char c)
{
if (c == '\n')
serial_putc('\r');
/* Wait for fifo to shift out some bytes */
while (!((readb(&uart->lsr) & (UART_LSR_TDRQ | UART_LSR_TEMT)) == 0x60))
;
writeb((u8)c, &uart->rbr_thr_dllr);
}
int serial_getc(void)
{
while (!serial_tstc())
;
return readb(&uart->rbr_thr_dllr);
}
void serial_puts(const char *s)
{
while (*s)
serial_putc(*s++);
}
|
