blob: 31b679516ff2c93547f1b5f52ddec2a246882e6d (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
|
/*
* Adaptive Body Bias programming sequence for OMAP5 family
*
* (C) Copyright 2013
* Texas Instruments, <www.ti.com>
*
* Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/omap_common.h>
#include <asm/io.h>
/*
* Setup LDOVBB for OMAP5.
* On OMAP5+ some ABB settings are fused. They are handled
* in the following way:
*
* 1. corresponding EFUSE register contains ABB enable bit
* and VSET value
* 2. If ABB enable bit is set to 1, than ABB should be
* enabled, otherwise ABB should be disabled
* 3. If ABB is enabled, than VSET value should be copied
* to corresponding MUX control register
*/
s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb)
{
u32 vset;
/*
* ABB parameters must be properly fused
* otherwise ABB should be disabled
*/
vset = readl(fuse);
if (!(vset & OMAP5_ABB_FUSE_ENABLE_MASK))
return -1;
/* prepare VSET value for LDOVBB mux register */
vset &= OMAP5_ABB_FUSE_VSET_MASK;
vset >>= ffs(OMAP5_ABB_FUSE_VSET_MASK) - 1;
vset <<= ffs(OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK) - 1;
vset |= OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK;
/* setup LDOVBB using fused value */
clrsetbits_le32(ldovbb, OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK, vset);
return 0;
}
|
