summaryrefslogtreecommitdiffstats
path: root/drivers/usb/dwc3
Commit message (Collapse)AuthorAgeFilesLines
* usb: dwc3: Makefile: Don't build gadget code if USB_GADGET is disabledRoger Quadros2016-05-271-1/+1
| | | | | | | It is pointless to build gadget driver if USB_GADGET is disabled. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Marek Vasut <marex@denx.de>
* usb: dwc3: Move CONFIG_USB_DWC3_PHY_* to KconfigSam Protsenko2016-04-201-0/+17
| | | | Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* usb: dwc3: Move CONFIG_USB_DWC3_OMAP to KconfigSam Protsenko2016-04-201-0/+10
| | | | Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to KconfigSam Protsenko2016-04-201-0/+23
| | | | | | Description was borrowed from kernel dwc3 Kconfig. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to KconfigSam Protsenko2016-04-201-0/+7
| | | | | | | | | | | | | | | | | | | | | | Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and make all UDC controllers select USB_GADGET_DUALSPEED: - add next options to Kconfig selecting USB_GADGET_DUALSPEED: - USB_GADGET_ATMEL_USBA - USB_GADGET_DWC2_OTG - USB_DWC3 - CI_UDC - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED While at it, make some related fixes: - remove DUALSPEED from configs that don't enable gadget support: - kwb.h - tseries.h - add missing USB_GADGET option to next configs: - novena_defconfig - pcm051_rev*_defconfig - xfi3_defconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* bug.h: move BUILD_BUG_* defines to include/linux/bug.hMasahiro Yamada2016-01-252-2/+1
| | | | | | | | | | | | | | | | BUILD_BUG_* macros have been defined in several headers. It would be nice to collect them in include/linux/bug.h like Linux. This commit is cherry-picking useful macros from include/linux/bug.h of Linux 4.4. I did not import BUILD_BUG_ON_MSG() because it would not work if it is used with include/common.h in U-Boot. I'd like to postpone it until the root cause (the "error()" macro in include/common.h causes the name conflict with "__attribute__((error()))") is fixed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* usb: dwc3: fix build warningsFelipe Balbi2015-12-072-2/+2
| | | | | | | | | | | | | | fix the following build warnings: drivers/usb/dwc3/core.c: In function ‘dwc3_uboot_init’: drivers/usb/dwc3/core.c:625:6: warning: ‘dev’ is used uninitialized in this function [-Wuninitialized] mem = devm_kzalloc(dev, sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL); ^ drivers/usb/dwc3/dwc3-omap.c: In function ‘dwc3_omap_uboot_init’: drivers/usb/dwc3/dwc3-omap.c:380:7: warning: ‘dev’ is used uninitialized in this function [-Wuninitialized] omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL); Signed-off-by: Felipe Balbi <balbi@ti.com>
* Various Makefiles: Add SPDX-License-Identifier tagsTom Rini2015-11-101-0/+4
| | | | | | | | | | | After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* usb: dwc3: Fix warnings on 64-bit buildsMichal Simek2015-11-034-15/+16
| | | | | | | Change aritmentics to use 64bit types to be compatible with 64bit builds. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* linux, compat: add missing definitions for ubiHeiko Schocher2015-10-261-5/+0
| | | | | | | | | | | | add missing definitions for the ubi/ubifs sync with linux 4.2, also change "#define kfree ..." into a static inline, so prevent ubi compile error: CC drivers/mtd/ubi/fastmap.o drivers/mtd/ubi/fastmap.c: In function 'scan_pool': drivers/mtd/ubi/fastmap.c:475:3: error: called object 'free' is not a function Signed-off-by: Heiko Schocher <hs@denx.de>
* TI PHY: Add support to control 2nd USB PHY in DRA7xx/AM57xxKishon Vijay Abraham I2015-08-281-4/+11
| | | | | | | | Added support to power on/power off the second USB PHY present in DRA7xx and AM57xx. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* usb: dwc3: dwc3-omap: Use the clear register inorder to clear the interruptsKishon Vijay Abraham I2015-08-281-18/+28
| | | | | | | | | | Writing "0x00" to the USBOTGSS_IRQENABLE_SET_MISC and USBOTGSS_IRQENABLE_SET_0 doesn't disable the interrupts. Used USBOTGSS_IRQENABLE_CLR_MISC and USBOTGSS_IRQENABLE_CLR_0 instead. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* samsung: usb: phy: Support for DWC3 PHYLukasz Majewski2015-06-082-0/+79
| | | | | | | | | | | New files, namely samsung_usb_phy.c and samsung-usb-phy-uboot.h have been added to u-boot to provide proper PHY handling at Exynos5 SoCs. This code is used thereafter in the board_usb_init() call. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de>
* usb: dwc3: Correct clean up code for requestsLukasz Majewski2015-04-141-24/+14
| | | | | | | | | | | | | | | | For u-boot dwc3 driver the scatter gather list support has been removed from original linux code. It is correct, since we try to send one request at a time. However, the cleanup left spurious break, which caused early exit from loop at dwc3_cleanup_done_reqs() function. As a result the dwc3_gadget_giveback() wasn't called and caused USB Mass Storage to hang. This commit removes this problem and refactor the code to remove superfluous do { } while(1) loop. Test HW: Odroid XU3 (with ./test/ums/ums_gadget_test.sh) Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: gadget: Set non EP0 max packet limit to 512BLukasz Majewski2015-04-141-1/+1
| | | | | | | | | | Commit "drivers/dwc3: add a workaround for too small OUT requests" sets max packet for OUT requests when transfer is smaller. Until this change the default maxpacket for non EP0 EPs was 1024. This is too much, since UMS LBA size is 512B Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: gadget: Set all ctrl fields of Transfer Control Blocks (TRB) to ↵Lukasz Majewski2015-04-141-13/+2
| | | | | | | | | | | | | | | | | be LST It turned out that current dwc3 gadget code is preparing multiple TRBs for a transfer. Unfortunately, when multiple requests are in the same queue, only for the last one the LST (last) ctrl bit is set. Due to that dwc3 HW executes all TRBs up till the one marked as last. Unfortunately, UMS requires call of ->complete callback after any send TRB. This is the reason for "hangs" in executing UMS. This code simplifies this situation and set each TRB's ctrl field bit to be last (LST bit). Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: optimize interrupt loopMarek Szyprowski2015-04-142-9/+13
| | | | | | | | There is no point in calling dwc3_thread_interrupt() if no event is pending. There is also no point in flushing event cache in EVERY loop iteration. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
* usb: dwc3: add a workaround for too small OUT requestsMarek Szyprowski2015-04-141-0/+8
| | | | | | | DWC3 hangs on OUT requests smaller than maxpacket size, so HACK the request length to be at least equal to maxpacket size. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
* usb: dwc3: make dwc3_set_mode to staticJoonyoung Shim2015-04-142-2/+1
| | | | | | | This commit makes the dwc3_set_mode() as static, to prevent collisions. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: Remove BIT(x) macro from DWC3's gadget codeLukasz Majewski2015-04-142-2/+2
| | | | | | | The BIT() macro is used only in those places, so it is reasonable to replace it by a constant value. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: Makefile: Make dwc3 driver compile in u-bootKishon Vijay Abraham I2015-04-141-32/+3
| | | | | | | | Now that the entire dwc3 driver is adapted to compile with uboot build, modify the Makefiles so that the dwc3 driver can be built. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: Add chained TRB support for ep0Kishon Vijay Abraham I2015-04-142-19/+55
| | | | | | | | | dwc3 can do only max packet aligned transfers. So in case request length is not max packet aligned and is bigger than DWC3_EP0_BOUNCE_SIZE two chained TRBs is required to handle the transfer. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: ep0: preparation for implementing chained TRBKishon Vijay Abraham I2015-04-141-8/+12
| | | | | | | | No functional change. Modified few things so that there are no code duplication while implementing chained TRB. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* dwc3: flush the buffers before using itKishon Vijay Abraham I2015-04-144-3/+27
| | | | | | | | In the linux kernel, non cacheable buffers are used. However in uboot since there are no APIs to allocate non cacheable memory, all the buffers should be flushed before using it. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* usb: dwc3: TI PHY: PHY driver for dwc3 in TI platformsKishon Vijay Abraham I2015-04-141-0/+309
| | | | | | | | | | | | | | | Added a single driver for both USB2 PHY programming and USB3 PHY programming. USB3 PHY is taken from drivers/phy/phy-ti-pipe3.c in linux kernel. commit 56042e : phy: ti-pipe3: Fix suspend/resume and module reload. USB2 PHY is taken from drivers/phy/phy-omap-usb2.c in linux kernel. commit eb82a3 : phy: omap-usb2: Balance pm_runtime_enable() on probe failure and remove. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: dwc3-omap: add interrupt status API to check for interruptsKishon Vijay Abraham I2015-04-141-0/+20
| | | | | | | | Added an API to check for interrupt status. This API is generally called from board file to check for interrupt status. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* dwc3: dwc3-omap: add support for multiple dwc3-omap controllersKishon Vijay Abraham I2015-04-141-6/+20
| | | | | | | | Added support for multiple dwc3 omap controllers. This gives uboot the capability to control multiple dwc3 omap controllers. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: dwc3-omap: change probe and remove to uboot init and uboot exit codeKishon Vijay Abraham I2015-04-141-89/+39
| | | | | | | | | | | Removed probe and remove that are specific to linux and replaced it with uboot init and uboot exit. These functions will be invoked from boardfile. This will change once we have dwc3-omap driver adapted to use the uboot driver model. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* include: dwc3-omap-uboot: add a structure for populating dwc3-omap platform dataKishon Vijay Abraham I2015-04-141-7/+0
| | | | | | | | | | Added a structure to populate dwc3 omap platform data. The board file should populate these platform data before invoking dwc3 omap driver. This will be removed once dwc3-omap driver is adapted to use the driver model. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: dwc3-omap: make dwc3-omap build in ubootKishon Vijay Abraham I2015-04-141-136/+8
| | | | | | | | | | | *) Changed the included header files to that used in u-boot. *) Removed extcon_* APIs *) Removed regulator_* APIs *) Fixed other misc warnings *) Added dwc3-omap.h to include the definitions of UTMI modes. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* dwc3: core: added an API to invoke irq handlersKishon Vijay Abraham I2015-04-141-0/+21
| | | | | | | | | Since interrupt support is not present in u-boot, added an API to handle the interrupts in dwc3 core. This API can be polled to handle the interrupts. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* dwc3: core: add support for multiple dwc3 controllersKishon Vijay Abraham I2015-04-142-8/+28
| | | | | | | | Added support for multiple dwc3 controllers. This gives uboot the capability to control multiple dwc3 controllers. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* dwc3: core: change probe and remove to uboot init and uboot exit codeKishon Vijay Abraham I2015-04-141-166/+52
| | | | | | | | Removed probe and remove that are specific to linux and replaced it with uboot init and uboot exit. These functions will be invoked from boardfile. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: core: make dwc3 core build in ubootKishon Vijay Abraham I2015-04-143-196/+40
| | | | | | | | | | | *) Changed the include header files to that used in u-boot. *) Removed phy_* APIs *) Removed jiffies and used a simple while loop *) Used dma_alloc_coherent and dma_free_coherent APIs of u-boot *) Fixed other misc warnings Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: ep0: make dwc3 ep0 build in ubootKishon Vijay Abraham I2015-04-143-12/+27
| | | | | | | | | *) Changed the included header files to that used in u-boot. *) added dwc3_ep_event_string() used in ep0.c *) Fixed other misc warnings Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: gadget: make dwc3 gadget build in ubootKishon Vijay Abraham I2015-04-143-163/+85
| | | | | | | | | | | | | Did a bunch of things to get dwc3/gadget.c compile in u-boot without build errors and warnings *) Changed the included header files to that used in u-boot. *) Used dma_alloc_coherent and dma_free_coherent APIs of u-boot *) removed sg support *) remove jiffies and used a simple while loop *) removed irq support and added a function to call these interrupt handler. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: linux-compat: Add header for dwc3 linux compatibiltiyKishon Vijay Abraham I2015-04-141-0/+30
| | | | | | | | | Added a header file to include various linux specific APIs like pr_debug, WARN_ WARN_ON_ONCE etc.. in order to avoid compilation error while building dwc3 driver. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: remove pm related operations from dwc3 driverKishon Vijay Abraham I2015-04-144-223/+5
| | | | | | | | Removed all pm related operations including pm_runtime APIs, suspend/resume hooks as support for these are not present in u-boot. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: fix dwc3 header filesKishon Vijay Abraham I2015-04-142-14/+3
| | | | | | | | | Changed the header files included in core.h and io.h to the u-boot header files so that these files can be included in other dwc3 source files and be compiled in uboot. Also added otg.h which has the defines for dr_mode. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: remove trace_* APIs from dwc3 driverKishon Vijay Abraham I2015-04-144-80/+29
| | | | | | | | Removed most of the trace_* APIs from dwc3 driver since tracepoints are not supported in u-boot. Replaced some of the trace_* API with dev_dbg/dev/vdbg. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Review-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: Modify the file headers to u-boot formatKishon Vijay Abraham I2015-04-147-58/+45
| | | | | | | | | Modified the file header to the format that is used in u-boot. Also included in the header, the commit in linux kernel from which each of these files are added. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: remove un-used files from dwc3 folderKishon Vijay Abraham I2015-04-1413-2741/+0
| | | | | | | | removed un-used/un-supported files from dwc3. These files can be added later as and when the support is added. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: add dwc3 folder from linux kernel to u-bootKishon Vijay Abraham I2015-04-1421-0/+9679
Added dwc3 folder from linux kernel 3.19-rc1 (97bf6af1f9) to u-boot. This will be adapted to work with u-boot in the following patches. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
OpenPOWER on IntegriCloud