summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/fsl_esdhc.c
Commit message (Expand)AuthorAgeFilesLines
* mmc:eSDHC: Workaround for data timeout issue on Txxx SoCHaijun.Zhang2014-04-021-0/+3
* mmc: fsl_esdhc: add controller reset in case of data related errors tooAndrew Gabbasov2014-04-021-27/+36
* mmc: fsl_esdhc: fix calculation of timeout for data transactionsAndrew Gabbasov2014-04-021-6/+6
* mmc: Split mmc struct, rework mmc initialization (v2)Pantelis Antoniou2014-03-241-28/+27
* mmc: Convert mmc struct's name array to a pointerPantelis Antoniou2014-03-241-1/+1
* mmc: Remove ops from struct mmc and put in mmc_opsPantelis Antoniou2014-03-241-6/+8
* esdhc: Detecting 8 bit width before mmc initializationHaijun.Zhang2014-01-221-0/+5
* esdhc: Workaround for card can't be detected on T4240QDSHaijun.Zhang2014-01-221-0/+4
* powerpc/esdhc: Add 3.3v voltage support in esdhc capacity registerHaijun.Zhang2013-10-311-0/+6
* esdhc: memset mmc struct before putting into useHaijun.Zhang2013-10-311-0/+1
* Powerpc/esdhc: Add simple description of esdhc registerHaijun.Zhang2013-10-311-37/+37
* powerpc/esdhc: Map register for eSDHC Host Controller V3.0Haijun.Zhang2013-10-311-2/+14
* mmc: fsl_esdhc: Check the result from malloc()Fabio Estevam2013-09-201-0/+2
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-241-17/+1
* fsl_esdhc: Touch only relevant sys ctrl bitsDirk Behme2013-07-161-3/+3
* Powerpc: eSDHC: Fix mmc read write err in uboot of T4240QDS boardHaijun.Zhang2013-07-161-1/+1
* fsl_esdhc: Do not clear interrupt status bits until data processedAndrew Gabbasov2013-06-131-4/+3
* mmc: fsl_esdhc: Fix hang after 'save' commandFabio Estevam2013-06-131-1/+1
* powerpc/esdhc: Correct judgement for DATA PIO modeHaijun.Zhang2013-05-151-1/+1
* mmc: fsl_esdhc: Use calloc()Fabio Estevam2013-05-061-2/+1
* fsl_esdhc: Fix DMA transfer completion waiting loopAndrew Gabbasov2013-04-141-2/+1
* fsl_esdhc: flush cache after IO completionEric Nelson2013-04-141-3/+2
* mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a boardAbbas Raza2013-04-031-0/+7
* mmc: add support for write protectionNikita Kiryanov2013-03-081-0/+1
* ppc: arm: Move sdhc_clk into arch_global_dataSimon Glass2013-02-041-3/+3
* fsl_esdhc: add MMC_MODE_HC host_capsShawn Guo2013-01-051-1/+1
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2012-11-051-1/+2
|\
| * mxc: Fix SDHC multi-instance clockBenoît Thébaudeau2012-10-161-2/+3
* | drivers/mmc/fsl_esdhc.c: sparse fixesKim Phillips2012-11-041-2/+2
|/
* fsl_esdhc: Remove cache snooping for i.MXBenoît Thébaudeau2012-09-011-2/+3
* FSL/eSDHC: enable the clock to detect the SD cardJerry Huang2012-07-131-0/+3
* i.MX: fsl_esdhc: allow use with cache enabled.Eric Nelson2012-07-131-1/+16
* mmc: fsl_esdhc: Poll until card is not busy anymoreDirk Behme2012-05-081-1/+38
* fsl_esdhc: fix PIO mode transfersIra Snyder2012-01-081-1/+2
* mmc: fsl_esdhc: Implement card-detect hook.Thierry Reding2012-01-081-17/+12
* mmc: Change board_mmc_getcd() function prototype.Thierry Reding2012-01-081-3/+5
* i.mx: fsl_esdhc: add the i.mx6q supportJason Liu2012-01-081-3/+9
* fsl_esdhc: Initialize mmc->b_maxFabio Estevam2011-05-181-0/+1
* fsl_esdhc: Fix multi-block read restriction on i.MX53 eSDHCv2Jason Liu2011-04-291-0/+4
* drivers/mmc/fsl_esdhc.c: reordered testsFrans Meulenbroeks2011-04-131-3/+3
* fsl_esdhc: Deal with watermark level register related changesPriyanka Jain2011-04-101-4/+4
* fsl_esdhc: Correcting esdhc timeout counter calculationPriyanka Jain2011-03-071-1/+15
* fsl_esdhc: Add the workaround for erratum ESDHC-A001 (enable on P2020)Kumar Gala2011-02-031-0/+5
* fsl_esdhc: Add the workaround for erratum ESDHC135 (enable on P4080)Roy Zang2011-01-141-0/+5
* fsl_esdhc: Add the workaround for erratum ESDHC111 (enable on P4080)Jerry Huang2011-01-141-1/+9
* fsl_esdhc: Fix esdhc disabled problem on some platformsChenhui Zhao2011-01-141-6/+8
* fsl_esdhc: Fix the voltage validation processLi Yang2010-12-181-5/+15
* fsl_esdhc: Fix max clock frequencyJerry Huang2010-12-181-1/+1
* fsl_esdhc: Use mmc_set_clock to set initial speedJerry Huang2010-12-181-1/+1
* fsl_esdhc: Set the eSHDC DMACTL[SNOOP] bit after resetting the controllerP.V.Suresh2010-12-131-4/+4
OpenPOWER on IntegriCloud