summaryrefslogtreecommitdiffstats
path: root/board/ti/panda/panda.c
Commit message (Collapse)AuthorAgeFilesLines
* omap-common: Rename set_muxconf_regs_essential to set_muxconf_regsPaul Kocialkowski2016-03-151-1/+1
| | | | | | | There is no distinction between essential and non-essential mux configuration, so it doesn't make sense to have an "essential" prefix. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* omap_hsmmc: Board-specific TWL6030 MMC power initializationPaul Kocialkowski2016-03-151-0/+6
| | | | | | | | | | Boards using the TWL6030 regulator may not all use the LDOs the same way. Some might also not use MMC1 at all, so VMMC would't have to be enabled. This delegates TWL6030 MMC power initializations to board-specific functions, that may still call twl6030_power_mmc_init for the default behavior. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* omap-common: Common serial and usbethaddr functions based on die idPaul Kocialkowski2015-10-221-3/+1
| | | | | | | | | Now that we have a common prototype to grab the omap die id, functions to figure out a serial number and usb ethernet address can use it directly. Those also get an omap_die_id prefix for better consistency. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* omap4: omap_die_id supportPaul Kocialkowski2015-10-221-6/+3
| | | | | | | | This introduces omap4 support for omap_die_id, which matches the common omap_die_id definition. It replaces board-specific code to grab the die id bits. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM Fix pandaboard es and a4 revision IDdbatzle@dcbcyber.com2015-10-221-2/+2
| | | | | | | board_name environment variable was not getting set correctly for Pandaboard A4 and ES Signed-off-by: David Batzle <dbatzle@dcbcyber.com> CC: Albert Aribaud <albert.u.boot@aribaud.net>; Tom Rini <trini@ti.com>; Peter Robinson <pbrobinson@gmail.com>
* ARM: OMAP4: Panda: rework DMM logicNishanth Menon2015-01-051-0/+16
| | | | | | | | | | | | | | | Part of DMM logic is reuse from commit 47a4bea6af77b01d59a410d09a4c34b2dd14cf50 ("ARM: omap4: Update sdram setting for panda rev A6") Which broke SDP4430 with ES2.3 (uses old DDR). So, to maintain support for newer DDR used in Panda ES rev B3, we should, in addition to the commit 675cc77a3ae45e8b0ec17128563264d4a509f628 ("ARM:OMAP4+: panda-es: Support Rev B3 Elpida DDR2 RAM"), DDR timings, also do DMM configuration specific to Panda. Signed-off-by: Nishanth Menon <nm@ti.com>
* OMAP: common: consolidate fake USB ethernet MAC address creationNishanth Menon2014-04-171-15/+6
| | | | | | | | | | | | | | TI platforms such as OMAP5uevm, PandaBoard, use equivalent logic to generate fake USB MAC address from device unique DIE ID. Consolidate this to a generic location such that other TI platforms such as BeagleBoard-XM can also use the same. NOTE: at this point in time, I dont yet see a need for a generic dummy ethernet MAC address creation function, but if there is a need in the future, this can be further abstracted out. Signed-off-by: Nishanth Menon <nm@ti.com>
* ARM: OMAP: remove sr32() from OMAP board codeWolfgang Denk2014-04-171-1/+1
| | | | | | | | | | Replace the custom sr32() bit manipulation function in arch/arm/cpu/armv7/omap3/board.c and board/ti/panda/panda.c by standard I/O accessors. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
* ARM: OMAP4/5: Remove dead code against CONFIG_SYS_ENABLE_PADS_ALLJassi Brar2014-01-241-30/+0
| | | | | | | | | The commit f3f98bb0 : "ARM: OMAP4/5: Do not configure non essential pads, clocks, dplls" removed the config option aimed towards moving that stuff into kernel, which renders some code unreachable. Remove that code. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
* pandaboard: 1/1] ARM:OMAP4+: panda-es: Support Rev B3 Elpida DDR2 RAMHardik Patel2013-12-041-0/+60
| | | | Signed-off-by: Hardik Patel <hardik.patel@volansystech.com>
* usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.Troy Kisky2013-10-201-1/+2
| | | | | | | This paramter will later be used to initialize OTG ports in host or device mode. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* usb: new board-specific USB init interfaceMateusz Zalega2013-10-201-1/+1
| | | | | | | | | | | | | | This commit unifies board-specific USB initialization implementations under one symbol (usb_board_init), declaration of which is available in usb.h. New API allows selective initialization of USB controllers whenever needed. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com>
* ARM: omap4-panda: Add MAC address creation for pandaDan Murphy2013-10-141-0/+16
| | | | | | | | Add a MAC address create based on the OMAP die ID registers. Then poplulate the ethaddr enviroment variable so that the device tree alias can be updated prior to boot. Signed-off-by: Dan Murphy <dmurphy@ti.com>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-241-17/+1
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* arm: omap4: panda: Fix checkpatch on panda fileDan Murphy2013-06-181-13/+13
| | | | | | | | Fix the checkpatch warning on the panda.c file for leading spaces. Fix the CHECK warnings on the panda.c file for parenthesis alignment. Signed-off-by: Dan Murphy <dmurphy@ti.com>
* arm: omap4: panda: Add reading of the board revisionDan Murphy2013-06-181-5/+73
| | | | | | | | | | | | | | | | | | | | | | | Detect if we are running on a panda revision A1-A6, or an ES panda board. This can be done by reading the level of GPIOs and checking the processor revisions. This should result in: Panda 4430: GPIO171, GPIO101, GPIO182: 0 1 1 => A1-A5 GPIO171, GPIO101, GPIO182: 1 0 1 => A6 Panda ES: GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 0 1 1 => B1/B2 GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 1 1 1 => B3 Set the board name appropriately for the board revision that is detected. Update the findfdt macro to load the a4 device tree binary. Signed-off-by: Dan Murphy <dmurphy@ti.com> [trini: %s/CONTROL_PADCONF_CORE/(*ctrl)->control_padconf_core_base/ and formatting for that] Signed-off-by: Tom Rini <trini@ti.com>
* ARM: OMAP2+: Rename asm/arch/clocks.h asm/arch/clock.hLokesh Vutla2013-06-101-1/+1
| | | | | | | To be consistent with other ARM platforms, renaming asm/arch-omap*/clocks.h to asm/arch-omap*/clock.h Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: OMAP4+: Cleanup header filesLokesh Vutla2013-06-101-8/+12
| | | | | | | After having the u-boot clean up series, there are many definitions that are unused in header files. Removing all those unused ones. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM:Panda:Fix device tree loading for the panda-esDan Murphy2013-05-101-0/+6
| | | | | | | | | | | Fix the device tree loading for panda(4430) and panda-es(4460) Modify the board name if a 4460 panda or panda-es is detected at run time. In the findfdt add a check for the panda-es board name and load the panda-es device tree blob. Signed-off-by: Dan Murphy <dmurphy@ti.com>
* omap_hsmmc: add driver check for write protectionNikita Kiryanov2013-03-081-1/+1
| | | | | | | | Add check for write protection in omap mmc driver. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
* omap_hsmmc: implement driver check for card detectionNikita Kiryanov2013-03-081-2/+1
| | | | | | | Implement driver check for card detection. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
* usb: ehci: rework to take advantage of new lowlevel interfaceLucas Stach2012-10-151-3/+3
| | | | | | | | | | | | | | Kill off ehci-core.h It was used to specify some static controller data. To support more than one controller being active at any time we have to carry the controller data ourselfes. Change the ehci interface accordingly. NOTE: OMAP implemented the ehci stuff a bit backwards and should be fixed to do the same thing as other platforms. But the change for now is at least compile clean. Signed-off-by: Lucas Stach <dev@lynxeye.de> Reviewed-by: Marek Vasut <marex@denx.de>
* ARM:OMAP+:MMC: Add parameters to MMC initJonathan Solnit2012-05-151-1/+1
| | | | | | | | | | Add parameters to the OMAP MMC initialization function so the board can mask host capabilities and set the maximum clock frequency. While the OMAP supports a certain set of MMC host capabilities, individual boards may be more restricted and the OMAP may need to be configured to match the board. The PRG_SDMMC1_SPEEDCTRL bit in the OMAP3 is an example. Signed-off-by: Jonathan Solnit <jsolnit@gmail.com>
* ehci-omap: Clean up added ehci-omap.cGovindraj.R2012-02-121-0/+38
| | | | | | | | | | | | | | | | | | Clean up added ehci-omap.c and make it generic for re-use across omap-soc having same ehci ip block. Also pass the modes to be configured from board file and configure the ports accordingly. All usb layers are not cache aligned, till then keep cache off for usb ops as ehci will use internally dma for all usb ops. * Add a generic common header ehci-omap.h having common ip block data and reg shifts. * Rename and modify ehci-omap3 to ehci.h retain only conflicting sysc reg shifts remove others and move to common header file. * pass the board data for beagle/panda accordinly to use ehci ports. Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
* omap4_panda: Initialize the USB phyChris Lalancette2011-12-191-0/+59
| | | | | | | | | | During misc_init_r, make sure to setup the clocks properly for the USB hub on the pandaboard. With this in place, the USB hub and the ethernet works on the pandaboard. Signed-off-by: Chris Lalancette <clalancette@gmail.com> Acked-by: Aneesh V <aneesh@ti.com>
* omap5: Add minimal support for omap5430.Sricharan2011-11-151-1/+26
| | | | | | | | | | | | | | | | This patch adds the minimal support for OMAP5. The platform and machine specific headers and sources updated for OMAP5430. OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP architecture. It's a dual core SOC with GIC used for interrupt handling and SCU for cache coherency. Also moved some part of code from the basic platform support that can be made common for OMAP4/5. Rest is kept out seperately. The same approach is followed for clocks and emif support in the subsequent patches. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* omap4: splitting padconfs into common, 4430 and 4460Ricardo Salveti de Araujo2011-10-271-0/+17
| | | | | | | | | | Not all padconfs are the same between 4430 and 4460, so instead of working around this with an if, we should have an specific padconf structure for both chips (like handling the differences between the LEDs GPIOs and TPS). Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@linaro.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* omap4: cleanup pin mux dataAneesh V2011-08-031-19/+6
| | | | | | | | | | | | | - separate mux settings into essential and non essential parts - essential part is board independent as of now(so move it to SoC directory). Will help in having single SPL for all boards. - Non-essential part(the pins not essential for u-boot to function) need to be phased out eventually. - Correct mux data by aligning to the latest settings in x-loader Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* ARMV7: OMAP4: Use generic mmc driver on PandaSukumar Ghorai2010-10-171-0/+9
| | | | | | | This patch switches from the legacy mmc driver to the new generic mmc driver Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Tested-by: Steve Sakoman <steve@sakoman.com>
* ARMV7: Add pad mux support for OMAP4Steve Sakoman2010-08-051-0/+26
| | | | | | | | | | Add functional multiplexing support for OMAP4 pads. Configure all the pads for the OMAP4430 SDP and OMAP4 Panda boards Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* ARMV7: Add basic gpmc initialization for OMAP4Steve Sakoman2010-07-151-0/+2
| | | | | | | | This patch adds a gpmc_init function for OMAP4 and adds calls to gpmc_init for existing OMAP4 boards: panda and sdp4430 Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* ARMV7: Add support for TI OMAP4 PandaSteve Sakoman2010-07-051-0/+61
OMAP4 Panda is a reference board based on OMAP4430, an ARMV7 Cortex A9 CPU This patch adds basic support for booting the board. It includes i2c and mmc support. It assumes U-boot is loaded to SDRAM with the help of another small bootloader (x-load) running from SRAM. U-boot currently relies on x-load for clock, mux, and SDRAM initialization Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
OpenPOWER on IntegriCloud