summaryrefslogtreecommitdiffstats
path: root/board/keymile/mgsuvd
Commit message (Collapse)AuthorAgeFilesLines
* 8xx, mgsuvd: rename board to a more generic nameHeiko Schocher2009-03-185-711/+0
| | | | | | | | | renaming the "mgsuvd" board port into "km8xx", because there come more similar boards from keymile. Compiling the mgsuvd board with "make mgsuvd_config" remains. Signed-off-by: Heiko Schocher <hs@denx.de>
* 8xx, mgsuvd: updates for 2009.03Heiko Schocher2009-02-191-0/+5
| | | | | | | | | | | | | | - activate Rx buf len > 1 on SMC - pram activated - MTDPARTS_DEFAULT defined - update the size of the flash in the DTS before booting Linux - MONITOR_LEN updated to 384k - added CONFIG_HOSTNAME - added CONFIG_ENV_BUFFER_PRINT - Environment size reduced to 16k Signed-off-by: Heiko Schocher <hs@denx.de>
* powerpc: keymile: Add a check for the PIGGY debug boardHeiko Schocher2009-01-241-2/+6
| | | | | | | | | Check the presence of the PIGGY on the keymile boards mgcoge, mgsuvd and kmeter1. If the PIGGY is not present, dont register this Ethernet device. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* mgsuvd add the board-specific part of the HDLC driverGary Jennejohn2008-12-072-1/+280
| | | | Signed-off-by: Gary Jennejohn <garyj@denx.de>
* Align end of bss by 4 bytesSelvamuthukumar2008-11-181-0/+1
| | | | | | | | | | Most of the bss initialization loop increments 4 bytes at a time. And the loop end is checked for an 'equal' condition. Make the bss end address aligned by 4, so that the loop will end as expected. Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
* Coding Style cleanup, update CHANGELOGWolfgang Denk2008-11-021-4/+4
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* mgcoge, mgsuvd: extract more common codeHeiko Schocher2008-10-181-51/+17
| | | | | | | | in ft_blob_update () for both boards was an unneccessary repetition of code, which this patch moves in a common function for this boards. Signed-off-by: Heiko Schocher <hs@denx.de>
* mgcoge, mgsuvd: use in_*/out_* accesorsHeiko Schocher2008-10-181-2/+3
| | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* mgsuvd: fix coding styleHeiko Schocher2008-10-181-38/+29
| | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-181-8/+8
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* mgcoge, mgsuvd: added support for the IVM EEprom.Heiko Schocher2008-10-181-0/+8
| | | | | | | | The EEprom contains some Manufacturerinformation, which are read from u-boot at boot time, and saved in same hush shell variables. Signed-off-by: Heiko Schocher <hs@denx.de>
* mgcoge, mgsuvd: add board specific I2C deblocking mechanism.Heiko Schocher2008-10-181-1/+1
| | | | | | | | | | | | | | | | | | | | As documented in doc/I2C_Edge_Conditions, adding a board specific deblocking mechanism via CFG_I2C_INIT_BOARD for the mgcoge and mgsuvd board. This code was originally written by Keymile in association with Anatech and Atmel in 1998. The Code toggels the SCL until the SCA line goes to HIGH (max. 16 times). And after this, a start condition is sent. This is another approach to deblock the I2C Bus. The soft I2C driver actually sends 9 clocks with SDA High, and then a stop at the end, to deblock the I2C Bus. Maybe we should use the approach from Keymile as the new standard? Signed-off-by: Heiko Schocher <hs@denx.de>
* mgcoge, mgsuvd: add I2C support.Heiko Schocher2008-10-181-0/+11
| | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* mgsuvd, mgcoge: move this 2 boards in one dir.Heiko Schocher2008-10-184-0/+445
There are some more extensions, which are for both boards and some more boards from this manufacturer will follow soon. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Wolfgang Denk <wd@denx.de>
OpenPOWER on IntegriCloud