summaryrefslogtreecommitdiffstats
path: root/arch/powerpc
Commit message (Collapse)AuthorAgeFilesLines
* mpc83xx: Add strider boardDirk Eibach2015-11-121-0/+3
| | | | | | | | | | | | | | The gdsys strider board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x 10/100 Mbit/s Ethernet (optional) - Lattice ECP3 FPGA connected via eLBC Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> [trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now] Signed-off-by: Tom Rini <trini@konsulko.com>
* powerpc: Finish updating u-boot*lds scripts for newer binutilsTom Rini2015-11-108-8/+0
| | | | | | | | In 522b021 we dropped 'PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4)' lines in the mpc85xx linker scripts as this is not required and breaks newer binutils. This commit cleans up the rest of the powerpc linker scripts. Signed-off-by: Tom Rini <trini@konsulko.com>
* Various Makefiles: Add SPDX-License-Identifier tagsTom Rini2015-11-103-3/+9
| | | | | | | | | | | After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* mpc85xx/u-boot*.lds: remove _GLOBAL_OFFSET_TABLE_ definitionZhenhua Luo2015-11-094-4/+0
| | | | | | | | | | | | | | | | | | | | | In binutils-2.25, the _GLOBAL_OFFSET_TABLE_ symbols defined by PROVIDE in u-boot.lds overrides the linker built-in symbols (https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff; h=b893397a4b1316610f49819344817715e4305de9), so the linker is treating _GLOBAL_OFFSET_TABLE_ as a definition into the .reloc section. To align with the change of binutils-2.25, the _GLOBAL_OFFSET_TABLE_ symbol should not be defined in sections, and the symbols in linker generated .got section should be used(https://sourceware.org/ml/binutils/2008-09/ msg00122.html) Fixed the following build errors with binutils-2.25: | powerpc-poky-linux-gnuspe-ld.bfd: _GLOBAL_OFFSET_TABLE_ not defined in linker created .got Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
* Replace "extern inline" with "static inline"Måns Rullgård2015-11-096-83/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | A number of headers define functions as "extern inline" which is causing problems with gcc5. The reason is that starting with version 5.1, gcc defaults to the standard C99 semantics for the inline keyword. Under the traditional GNU inline semantics, an "extern inline" function would never create an external definition, the same as inline *without* extern in C99. In C99, and "extern inline" definition is simply an external definition with an inline hint. In short, the meanings of inline with and without extern are swapped between GNU and C99. The upshot is that all these definitions in header files create an external definition wherever those headers are included, resulting in multiple definition errors at link time. Changing all these functions to "static inline" fixes the problem since this works as desired in all gcc versions. Although the semantics are slightly different (a static inline definition may result in an actual function being emitted), it works as intended in practice. This patch also removes extern prototype declarations for the changed functions where they existed. Signed-off-by: Mans Rullgard <mans@mansr.com>
* powerpc: Remove __ilog2_u64 and ffs4 from bitopsFabio Estevam2015-11-056-14/+12
| | | | | | | | | | | | | Remove __ilog2_u64 and ffs4 from powerpc bitops to align with the kernel implementation. Use the generic __ffs64 instead of a custom powerpc implementation. Cc: York Sun <yorksun@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com>
* video: Drop DEV_EXT_VIDEO flagBin Meng2015-11-051-1/+0
| | | | | | DEV_EXT_VIDEO does not have any actual meaning, hence drop it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* mpc85xx: Add support for the Varisys Cyrus boardAndy Fleming2015-11-041-0/+4
| | | | | | | | | | | This board runs a P5020 or P5040 chip, and utilizes an EEPROM with similar formatting to the Freescale P5020DS. Large amounts of this code were developed by Adrian Cox <adrian at humboldt dot co dot uk> Signed-off-by: Andy Fleming <afleming@gmail.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mpc85xx/t2081: enable parsing DDR ratio for T2081 rev1.1Shengzhou Liu2015-11-021-1/+2
| | | | | | | | T2081 rev 1.1 changes MEM_PLL_RAT in RCW which requires new parsing for PLL ratio. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* t1040d4rdb: assign muxed pins to qe-tdm when set hwconfig qe-tdmZhao Qiang2015-11-022-0/+22
| | | | | | | | | qe-tdm is muxed with diu, if hwconfig setted as qe-tdm, assign muxed pins to qe-tdm, then delete diu node from device tree. Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-10-304-897/+1
|\
| * net: Move some header files to include/Shaohui Xie2015-10-294-897/+1
| | | | | | | | | | | | | | | | | | | | The fsl_dtsec.h & fsl_tgec.h & fsl_fman.h can be shared on both ARM and PPC, move it out of ppc to include/, and change the path in drivers accordingly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | arch/powerpc/cpu/ppc4xx/Kconfig: Finish removing boardsTom Rini2015-10-271-16/+0
|/ | | | | | | My patches to drop various ppc4xx boards were not build tested and omitted the Kconfig parts. Signed-off-by: Tom Rini <trini@konsulko.com>
* powerpc: Drop old non-generic-board codeSimon Glass2015-10-191-986/+0
| | | | | | This code is no-longer used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arch/powerpc/config.mk: Pass -fno-ira-hoist-pressure when possibleTom Rini2015-10-171-1/+2
| | | | | | | | | There are various toolchain issues that cause us to produce invalid binaries with certain gcc 4.8.x and 4.9.x versions when we don't pass this flag in. Tested-by: Joakim Tjernlund <joakim.tjernlund@transmode.se> Signed-off-by: Tom Rini <trini@konsulko.com>
* ppc4xx: Remove lcd4_lwmon5 supportStefan Roese2015-10-111-1/+0
| | | | | | | This platform has not gone into production. So lets remove it. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
* Revert "powerpc: ppc4xx: remove lwmon5 support"Stefan Roese2015-10-112-0/+11
| | | | | | | | | | This reverts commit 8fe11b8901a31d11990488c82bc23612589d57be. I'll add support to lwmon5 in the next patch and will remove support for the broken lcd4_lwmon5 as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
* powerpc: mpc85xx: remove stxgp3, stxssa supportMasahiro Yamada2015-09-021-8/+0
| | | | | | | | These have not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Dan Malek <dan@embeddedalley.com>
* powerpc: mpc5xx: remove cmi_mpc5xx supportMasahiro Yamada2015-09-021-4/+0
| | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* powerpc: ppc4xx: remove zeus supportMasahiro Yamada2015-09-022-19/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* powerpc: ppc4xx: remove sbc405 supportMasahiro Yamada2015-09-021-4/+0
| | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* powerpc: ppc4xx: remove pcs440ep supportMasahiro Yamada2015-09-021-4/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* powerpc: ppc4xx: remove p3p440 supportMasahiro Yamada2015-09-021-4/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* powerpc: ppc4xx: remove lwmon5 supportMasahiro Yamada2015-09-022-11/+0
| | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Remove CONFIG_LWMON5 references. (Also, remove undefined CONFIG_WD_MAX_RATE while I am here.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* powerpc: ppc4xx: remove csb272, csb472 supportMasahiro Yamada2015-09-021-8/+0
| | | | | | | | These have not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tolunay Orkun <torkun@nextio.com>
* powerpc: ppc4xx: remove alpr supportMasahiro Yamada2015-09-021-4/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2015-09-0213-29/+124
|\
| * net/fman: Support both new and legacy FMan CompatiblesIgal Liberman2015-09-0112-28/+115
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently the FMan Port and MAC compatibles were changed. This patch aligns the FMan Port and MAC compatibles to the new FMan device tree binding document. The FMan device tree binding document can be found in the Linux kernel: ./Documentation/devicetree/bindings/powerpc/fsl/fman.txt This patch doesn't affect legacy compatibles support. Signed-off-by: Igal Liberman <igal.liberman@freescale.com> Tested-by: Xing Lei <xing.lei@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc: e6500: Lock/unlock L2 cache instead of L1 as init_ramYork Sun2015-09-011-1/+9
| | | | | | | | | | | | | | | | | | MPC85xx has been using locked L1 cache as init_ram. L1 cache is a write through cache on E6500. L2 cache is enabled to to hold the data. This patch locks/unlocks L2 cache to ensure no data cast out from L2 cache. Signed-off-by: York Sun <yorksun@freescale.com> Reported-by: Jeffery Zhu <Jefferry.Zhu@freescale.com>
* | SECURE_BOOT: Disable IE Key feature for RAMBOOTAneesh Bansal2015-09-011-2/+4
|/ | | | | | | | | | | | | | ISBC Key Extension feature is not applicable for RAMBOOT as there is no way to retrieve the CSF Header and validated IE Key table from SRAM once CPC has been disabled. The feature is only applicable in case of NOR SECURE BOOT. Code Cleanup: The SECURE_BOOT specific defines have been moved from arch-ls102xa/config.h to arm/include/asm/fsl_secure_boot.h Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Correct License and Copyright information on few filesRuchika Gupta2015-08-121-0/+2
| | | | | | | | | gpio.h - Added missing copyright in few files. rsa-mod-exp.h - Corrected copyright in the file. fsl_sec.h - Added missing license in files drivers/crypto/fsl/Makefile - Removed the incomplete GPLv2 license and replaced it with GPLv2+ license Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2015-07-316-58/+89
|\
| * powerpc/t4240: update serdes tableShaohui Xie2015-07-311-55/+48
| | | | | | | | | | | | | | | | | | | | Serdes Lanes availability on T4160 and T4080 are same, which serdes 2 & 3 support 8 Lanes, but serdes 1 & 4 support only 4 Lanes E/F/G/H, Lanes A/B/C/D are not available, updated the serdes table accordingly with some minor fix. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc/mpc85xx: SECURE BOOT-Copy Boot Script on RAMAneesh Bansal2015-07-311-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | For running Chain of Trust when doing Secure Boot from NAND, the Bootscript header and bootscript must be copied from NAND to RAM(DDR). The addresses and commands for the same have been defined. Signed-off-by: Saksham Jain <saksham@freescale.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041Aneesh Bansal2015-07-312-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Secure Boot Target is added for NAND for P3041. For mpc85xx SoCs, the core begins execution from address 0xFFFFFFFC. In case of secure boot, this default address maps to Boot ROM. The Boot ROM code requires that the bootloader(U-boot) must lie in 0 to 3.5G address space i.e. 0x0 - 0xDFFFFFFF. In case of NAND Secure Boot, CONFIG_SYS_RAMBOOT is enabled and CPC is configured as SRAM. U-Boot binary will be located on SRAM configured at address 0xBFF00000. In the U-Boot code, TLB entries are created to map the virtual address 0xFFF00000 to physical address 0xBFF00000 of CPC configured as SRAM. Signed-off-by: Saksham Jain <saksham@freescale.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc/mpc85xx: Correct CONFIG_USB_MAX_CONTROLLER_COUNT for p1025Nikhil Badola2015-07-281-1/+1
| | | | | | | | | | | | | | | | Correct the value CONFIG_USB_MAX_CONTROLLER_COUNT macro to 1 for p1025 as it has one USB controller Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc/t1024: update fman liodn for mac1Shengzhou Liu2015-07-282-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | MAC1 acts as 1G/10G dual-role MAC on T1024. We introduce macro SET_FMAN_RX_10G_TYPE2_LIODN for 10G MACs which have same Port ID and same offset of address with 1G MAC. Update it to match with the setting of fman in t1024 device tree, otherwise there is no 'fsl,liodn' in /proc/device-tree/soc@ffe000000/fman@400000/port@88000/ Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc/T104xD4: Add Secure boot support for T104xD4RDB platformsgaurav rana2015-07-282-0/+3
| | | | | | | | | | | | | | | | defconfig files are added and SFP version for these platforms is updated. Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | kbuild: create symbolic link only for ARM, AVR32, SPARC, PowerPC, x86Masahiro Yamada2015-07-271-0/+3
|/ | | | | | | | | | | | | The symbolic link to SoC/CPU specific header directory is created during the build, while it is only necessary for ARM, AVR32, SPARC, x86, and some CPUs of PowerPC. For the other architectures, it just results in a broken symbolic link. Introduce CONFIG_CREATE_ARCH_SYMLINK to not create unneeded symbolic links. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* powerpc: gitignore: ignore PowerPC DTBsMasahiro Yamada2015-05-281-0/+1
| | | | Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* arch: Make board selection choices optionalJoe Hershberger2015-05-1210-0/+10
| | | | | | | | | | | | By making the board selections optional, every defconfig will include the board selection when running savedefconfig so if a new board is added to the top of the list of choices the former top's defconfig will still be correct. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Tom Rini <trini@konsulko.com>
* ppc4xx: Remove sc3 boardStefan Roese2015-05-103-13/+1
| | | | | | | | | | | | | | | | As this board seems to be unmaintained for quite some time, and its not moved to the generic board ingrastructure, lets remove it. This will also enable us to remove the CONFIG_AUTOBOOT_DELAY_STR2 and CONFIG_AUTOBOOT_STOP_STR2 macros, as this sc3 board is the only one using one of this macros. A removal patch will follow soon. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Juergen Beisert <jbeisert@eurodsn.de> Acked-by: Heiko Schocher <hs@denx.de>
* powerpc/mpc85xx: Add board support for ucp1020Oleksandr G Zhadan2015-05-041-0/+4
| | | | | | | | | | New QorIQ p1020 based board support from Arcturus Networks Inc. http://www.arcturusnetworks.com/products/ucp1020/ Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com> Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com> [York Sun: remove patman tags from commit message] Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Fix compiling error for common/cmd_gpio.cOleksandr G Zhadan2015-05-042-2/+6
| | | | | | | | | | | | | | | | | | | | To replicate: 1. add to include/configs/p1_p2_rdb_pc.h "#define CONFIG_CMD_GPIO" 2. run `make P1020RDB-PC_defconfig` 3. run CROSS_COMPILE=powerpc-linux- make and you will get: common/built-in.o: In function `do_gpio': u-boot/common/cmd_gpio.c:186: undefined reference to `gpio_request' u-boot/common/cmd_gpio.c:194: undefined reference to `gpio_direction_input' u-boot/common/cmd_gpio.c:195: undefined reference to `gpio_get_value' u-boot/common/cmd_gpio.c:200: undefined reference to `gpio_get_value' u-boot/common/cmd_gpio.c:203: undefined reference to `gpio_direction_output' u-boot/common/cmd_gpio.c:209: undefined reference to `gpio_free Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com> Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mmc: fsl_esdhc: Add peripheral clock supportYangbo Lu2015-05-042-3/+56
| | | | | | | | | | | | The SD clock could be generated by platform clock or peripheral clock for some platforms. This patch adds peripheral clock support for T1024/T1040/T2080. To enable it, define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Cc: York Sun <yorksun@freescale.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mmc: fsl_esdhc: Add adapter card type identification supportYangbo Lu2015-05-041-0/+3
| | | | | | | | | | | | Add adapter card type identification support by reading FPGA STAT_PRES1 register SDHC Card ID[0:2] bits. To use this function, define CONFIG_FSL_ESDHC_ADAPTER_IDENT. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Cc: York Sun <yorksun@freescale.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> [York Sun: resolve conflicts in README.fsl-esdhc] Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Don't deref NULL if qman portal lacks cell-indexScott Wood2015-05-041-2/+7
| | | | | | Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Madalin-Cristian Bucur <madalin.bucur@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc: add 2 common dcache assembly functionsValentin Longchamp2015-05-0411-164/+48
| | | | | | | | | | | | | | This patch defines the 2 flush_dcache_range and invalidate_dcache_range functions for all the powerpc architecture. Their implementation is borrowed from the kernel's misc_32.S file and replace the ones from mpc86xx and ppc4xx since they were equivalent. This is a fix for the problem introduced by this patch: http://patchwork.ozlabs.org/patch/448849/ Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <yorksun@freescale.com>
* fsl/pci: Set CFG_READY for PCIe v3.0 and laterMinghuan Lian2015-05-041-0/+1
| | | | | | | | | | | | | | Freescale PCIe controllers v3.0 and later need to set bit CFG_READY to allow all inbound configuration transactions to be processed normally when in EP mode. However, bit CFG_READY has been moved from PCIe configuration space to CCSR PCIe configuration register comparing previous version. The patch is to set this bit according to PCIe version. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t4rdb: Add SD boot support for T4240RDB boardChunhe Lan2015-05-041-0/+1
| | | | | | | | | | | | This patch adds SD boot support for T4240RDB board. SPL framework is used. PBL initializes the internal RAM and copies SPL to it. Then SPL initializes DDR using SPD and copies u-boot from SD card to DDR, finally SPL transfers control to u-boot. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> [York Sun: Fix T4240RDB_SDCARD_defcofig] Reviewed-by: York Sun <yorksun@freescale.com>
OpenPOWER on IntegriCloud