summaryrefslogtreecommitdiffstats
path: root/arch/arm/include/asm/arch-mx6
Commit message (Expand)AuthorAgeFilesLines
* arch-mx6: add mx6dl_pins.hTroy Kisky2012-11-101-0/+149
* imx-common: cpu: add imx_ddr_sizeTroy Kisky2012-11-101-0/+1
* mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololiteTroy Kisky2012-11-102-1/+10
* i.MX6: add HDMI transmitter register declarations from kernel WIP.Eric Nelson2012-10-161-0/+1053
* i.MX6: set drive strength for parallel RGB padsEric Nelson2012-10-161-29/+29
* mx6qsabreauto: Pass the board revision to the kernelFabio Estevam2012-10-161-0/+6
* mx5/6: Define default SoC input clock frequenciesBenoît Thébaudeau2012-10-151-0/+14
* imx: Use MXC_I2C_CLK in imx i2c driverMatthias Weisser2012-10-151-0/+1
* i.MX6: get rid of redundant struct src_regs (dupe of struct src)Eric Nelson2012-10-151-21/+0
* i.MX6: define struct iomuxc and IOMUX_GPR2 register bitfieldsEric Nelson2012-10-151-0/+73
* i.MX6: Add ANATOP_PFD_480 bitfield constantsEric Nelson2012-10-151-0/+24
* i.MX6: define IOMUX_GPR3 register bitfieldsEric Nelson2012-10-151-0/+48
* i.MX6: define bitfields for CHSCCDR registerEric Nelson2012-10-151-0/+4
* i.MX6: change register name for CCM_CHSCCDR to match ref. manualEric Nelson2012-10-151-1/+1
* i.MX6: provide functional names for CCM_CCGR0-CCGR6 bit fieldsEric Nelson2012-10-151-179/+179
* MX6: drop binary constants from iomux headerStefano Babic2012-09-171-62/+62
* mxc: Define architecture identifierBenoît Thébaudeau2012-09-011-0/+2
* MX: Set a common gpio.h for all i.MXStefano Babic2012-09-012-8/+1
* imx-common/cmd_bmode.c: add imx bmode (bootmode) commandTroy Kisky2012-09-011-0/+21
* iomux: move IOMUX_GPR13_xxx definesTroy Kisky2012-09-011-0/+129
* imx-common: add i2c.c for bus recovery supportTroy Kisky2012-07-311-0/+1
* i.mx: iomux-v3.h: move to imx-common include directoryTroy Kisky2012-07-312-215/+1
* mx6: Make pad name macro consistent with the datasheetAshok2012-07-201-2/+2
* mx6: Allow mx6 to access the IPUv3 registersFabio Estevam2012-07-101-0/+3
* i.mx: i.mx6x: NO_MUX_I/NO_PAD_I not set correctlyJason Liu2012-07-071-2/+2
* i.MX6: add enable_sata_clock()Eric Nelson2012-05-153-0/+121
* i.MX6: Add ANATOP regulator initDirk Behme2012-05-151-0/+2
* imx-common: Factor out get_ahb_clk()Fabio Estevam2012-05-152-2/+3
* imx: Remove unneeded/repititive definitions from imx headersVikram Narayanan2012-04-161-2/+0
* i.MX6: define CACHELINE_SIZEEric Nelson2012-04-161-0/+2
* mx6: Read silicon revision from registerFabio Estevam2012-03-271-0/+142
* mx6: Remove duplicate definition of ANATOP_BASE_ADDRFabio Estevam2012-03-271-1/+0
* usb/ehci: Add USB support for the MX6QWolfgang Grandegger2012-03-262-0/+4
* net: fec_mxc: add 1000 Mbps selectionTroy Kisky2012-02-271-0/+1
* mx6q: Add support for ECSPI through mxc_spi driverEric Nelson2012-02-271-0/+44
* mx6q: define GPIO macros for translating between ordinals and port:indexEric Nelson2012-02-271-0/+4
* i.mx6: mx6x_pins: Fix uart txd definitionsTroy Kisky2012-02-121-24/+12
* imx: mx6q: add aipstz init for off platform periphJason Liu2012-01-161-0/+11
* i.mx6:imx6q: allign MAC address with burned-in orderingJason Liu2012-01-161-1/+1
* net: imx: Add multi-FEC support for imx_get_mac_from_fuseFabio Estevam2012-01-161-1/+1
* i.mx: add the initial support for freescale i.MX6Q processorJason Liu2011-12-097-0/+3037
OpenPOWER on IntegriCloud