summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ARM: OMAP: remove sr32() from OMAP board codeWolfgang Denk2014-04-172-3/+3
| | | | | | | | | | Replace the custom sr32() bit manipulation function in arch/arm/cpu/armv7/omap3/board.c and board/ti/panda/panda.c by standard I/O accessors. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
* board:tricorder: fixup SPL OOB layoutAndreas Bießmann2014-04-111-5/+6
| | | | | | | | | | | Commit d016dc42cedbf6102e100fa9ecb58462edfb14f8 changed the layout of BCH8 SW on omap3 boards. We need to adopt the ecc layout for the nand_spl_simle driver to avoid wrong ecc errors. Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de> Cc: Thomas Weber <thomas.weber@corscience.de> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* board:tricorder: enable omap_gpio clocksAndreas Bießmann2014-04-111-0/+3
| | | | | | Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de> Cc: Thomas Weber <thomas.weber@corscience.de> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* board:tricorder: always work with valid eeprom dataAndreas Bießmann2014-04-111-0/+2
| | | | | | | | | | | | | Commit 890880583d84607e36b52a785a96b167728bbf73 introduced EEPROM parsing and board detection but faild to return a valid tricorder_eeprom struct for backup case. When pressing S200 while reading EEPROM we ignore the value. We returned falsely a tricorder_eeprom struct with uninitialized data which is just garbage. Initialize it by zeroing the whole structure. Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de> Cc: Thomas Weber <thomas.weber@corscience.de> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* arm:board:trats2:FIX: Clear INFORM4 and INFORM5 registers at correct bootŁukasz Majewski2014-04-111-0/+13
| | | | | | | | | | | | | | During switch to device tree, commit 1ecab0f has removed this code. INFORM4 and INFORM5 registers are used by TRATS2 first stage bootloader for providing recovery. For normal operation, those two must be cleared out. This error emerges when one force reset from u-boot's command line for three times. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
* kbuild: fix a bug in regeneration of linker scriptsMasahiro Yamada2014-04-112-6/+6
| | | | | | | | | | | | | | | | | | | | | In some use cases, SPL linker script was not updated even when it should be. For instance, $ make tricoder_config all [ build complete ] ... modify include/configs/tricoder.h $ make spl/u-boot-spl.lds should be updated in this case, but it wasn't. To fix this problem, linker scripts generation should be handled by $(call if_changed_dep,...) rather than by $(call if_changed,...). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reported-by: Andreas Bießmann <andreas.devel@googlemail.com> Tested-by: Andreas Bießmann <andreas.devel@googlemail.com>
* Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2014-04-0897-7263/+5284
|\ | | | | | | | | | | | | | | Conflicts: arch/arm/cpu/arm926ejs/mxs/Makefile include/configs/trats.h include/configs/trats2.h include/mmc.h
| * Revert "Start the deprecation process for generic board"Tom Rini2014-04-042-195/+0
| | | | | | | | | | | | | | | | | | We've run into a non-trivial conversion to CONFIG_SYS_GENERIC_BOARD so we'll postpone this notice until right after v2014.04 is out. This reverts commit 36c4b1d98059244c34ec3327d9cc9f3c552fd01b. Signed-off-by: Tom Rini <trini@ti.com>
| * trats/trats2: enable CONFIG_RANDOM_UUIDPrzemyslaw Marczak2014-04-022-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This change enables automatically uuid generation by command gpt. In case of updating partitions layout user don't need to care about generate uuid manually. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Piotr Wilczek <p.wilczek@samsung.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: trini@ti.com
| * cmd:gpt: randomly generate each partition uuid if undefinedPrzemyslaw Marczak2014-04-023-22/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes: - randomly generate partition uuid if any is undefined and CONFIG_RAND_UUID is defined - print debug info about set/unset/generated uuid - update doc/README.gpt Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Piotr Wilczek <p.wilczek@samsung.com> Cc: Tom Rini <trini@ti.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Lukasz Majewski <l.majewski@samsung.com>
| * new commands: uuid and guid - generate random unique identifierPrzemyslaw Marczak2014-04-023-5/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Those commands basis on implementation of random UUID generator version 4 which is described in RFC4122. The same algorithm is used for generation both ids but string representation is different as below. char: 0 9 14 19 24 36 xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx UUID: be be be be be GUID: le le le be be Commands usage: - uuid [<varname>] - guid [<varname>] The result is saved in environment as a "varname" variable if argument is given, if not then it is printed. New config: - CONFIG_CMD_UUID Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: trini@ti.com
| * lib: uuid: add functions to generate UUID version 4Przemyslaw Marczak2014-04-024-5/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support to generate UUID (Universally Unique Identifier) in version 4 based on RFC4122, which is randomly. Source: https://www.ietf.org/rfc/rfc4122.txt Changes: - new configs: - CONFIG_LIB_UUID for compile lib/uuid.c - CONFIG_RANDOM_UUID for functions gen_rand_uuid() and gen_rand_uuid_str() - add configs dependency to include/config_fallbacks.h for lib uuid. lib/uuid.c: - add gen_rand_uuid() - this function writes 16 bytes len binary representation of UUID v4 to the memory at given address. - add gen_rand_uuid_str() - this function writes 37 bytes len hexadecimal ASCII string representation of UUID v4 to the memory at given address. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Lukasz Majewski <l.majewski@samsung.com> [trini: Add CONFIG_EFI_PARTITION to fallbacks] Signed-off-by: Tom Rini <trini@ti.com>
| * lib: uuid: code refactor for proper maintain between uuid bin and stringPrzemyslaw Marczak2014-04-025-36/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes in lib/uuid.c to: - uuid_str_to_bin() - uuid_bin_to_str() New parameter is added to specify input/output string format in listed functions This change allows easy recognize which UUID type is or should be stored in given string array. Binary data of UUID and GUID is always stored in big endian, only string representations are different as follows. String byte: 0 36 String char: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx string UUID: be be be be be string GUID: le le le be be This patch also updates functions calls and declarations in a whole code. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: trini@ti.com
| * part_efi: move uuid<->string conversion functions into lib/uuid.cPrzemyslaw Marczak2014-04-024-87/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit introduces cleanup for uuid library. Changes: - move uuid<->string conversion functions into lib/uuid.c so they can be used by code outside part_efi.c. - rename uuid_string() to uuid_bin_to_str() for consistency with existing uuid_str_to_bin() - add an error return code to uuid_str_to_bin() - update existing code to the new library functions. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: trini@ti.com
| * ahci: Fix data abort on multiple scsi resets.Roger Quadros2014-04-021-7/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 2faf5fb82ed6 introduced a regression that causes a data abort when running scsi init followed by scsi reset. There are 2 problems with the original commit 1) ALLOC_CACHE_ALIGN_BUFFER() allocates memory on the stack but is assigned to ataid[port] and used by other functions. 2) The function ata_scsiop_inquiry() tries to free memory which was never allocated on the heap. Fix these problems by using tmpid as a temporary cache aligned buffer. Allocate memory separately for ataid[port] and re-use it if required. Fixes: 2faf5fb82ed6 (ahci: Fix cache align error messages) Reported-by: Eli Nidam <elini@marvell.com> Signed-off-by: Roger Quadros <rogerq@ti.com>
| * mmc:eSDHC: Workaround for data timeout issue on Txxx SoCHaijun.Zhang2014-04-022-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. The Data timeout counter value in eSDHC_SYSCTL register is not working as it should be, so add quirks to enable this workaround to fix it to the max value 0xE. 2. Add CONFIG_SYS_FSL_ERRATUM_ESDHC111 to enable its workaround. * Update of patch for change mmc interface by Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * mmc: fsl_esdhc: add controller reset in case of data related errors tooAndrew Gabbasov2014-04-021-27/+36
| | | | | | | | | | | | | | | | The controller reset is performed now if command error occurs. This commit adds the reset for the case of data related errors too. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * mmc: fsl_esdhc: fix calculation of timeout for data transactionsAndrew Gabbasov2014-04-021-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Calculation of the timeout value should be based on actual clock value, written to controller registers. Since mmc->tran_speed is either the maximum allowed speed, or the preliminary value, that is be not yet set to registers, the actual timeout, taken by the controller, based on its clock settings, may be much longer than expected, based on mmc->tran_speed value. In particular it happens at early initialization stage, when typical value of mmc->tran_speed is 20MHz or 26MHz, while actual clock setting, configured in the controller, is 400kHz. It's more correct to use mmc->clock value for timeout calculation instead. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * mmc: Add 'mmc rst-function' sub-commandTom Rini2014-04-024-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | Some eMMC chips may need the RST_n_FUNCTION bit set to a non-zero value in order for warm reset of the system to work. Details on this being required will be part of the eMMC datasheet. Also add using this command to the dra7xx README. * Whitespace fix by panto Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * mmc: sh_mmcif: Fix warning by unused variableNobuhiro Iwamatsu2014-04-021-2/+1
| | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Reported-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * mmc: sh_mmcif: Fix compile errorNobuhiro Iwamatsu2014-04-021-1/+1
| | | | | | | | | | | | | | | | | | | | BY commit "mmc: Split mmc struct, rework mmc initialization (v2)", sh_mmcif has compile error. This fixes compile error. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Pantelis Antoniou <panto@antoniou-consulting.com> Reported-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| * Prepare v2014.04-rc3Tom Rini2014-03-311-1/+1
| | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
| * Kbuild: allow building tools without board configurationMasahiro Yamada2014-03-311-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prior to Kbuild, U-Boot could build under tools/ directory withour configuring for a specific board. That feature was lost when switching to Kbuild. This patch revives it again by adding a make target "tools-only". Usage: $ make tools-only Neither board configuration nor cross compiler are required to build host tools. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Suggested-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@ti.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
| * tegra: fix Makefile to pass per-file CFLAGSMasahiro Yamada2014-03-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | Since Kbuild was introduced, warmboot_avp.o has been compiled without -march=armv4t. Makefile should be adjusted to pass a per-file option. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com>
| * Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini2014-03-311-2/+2
| |\
| | * board: ecovec: fix USB0 clock enableBaruch Siach2014-03-311-1/+1
| | | | | | | | | | | | | | | | | | | | | Enable USB0 clock by resetting bit 20 of MSTPCR2. Leave other bits unchanged. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * board: ecovec: fix debug LEDs pin directionBaruch Siach2014-03-311-1/+1
| | | | | | | | | | | | | | | | | | | | | All pins should be output. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | drivers: i2c: delete an unused source fileMasahiro Yamada2014-03-311-387/+0
| |/ | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Heiko Schocher <hs@denx.de>
| * blackfin: mmc: Correct mmc_host_is_spi and bfin_sdh.cTom Rini2014-03-282-2/+2
| | | | | | | | | | | | | | | | In the recent mmc cleanup, the mmc_host_is_spi macro was broken and bfin_sdh.c had mmc->bus_width turned into mmc_bus_width(mmc), both of which were incorrect. Signed-off-by: Tom Rini <trini@ti.com>
| * am335x_evm: Drop CONFIG_SPL_ETH_SUPPORT from default buildTom Rini2014-03-281-3/+0
| | | | | | | | | | | | | | | | On the boards this target supports this option is either non possible without hardware mods (Beaglebone White/Black) or not supported due to board design. Drop this and regain some space. Signed-off-by: Tom Rini <trini@ti.com>
| * am335x_evm: Clarify when we build board_eth_initTom Rini2014-03-281-2/+16
| | | | | | | | | | | | | | | | If we build this function in cases where we would be discarding it anyhow we still end up with maybe unused warnings. Rather than litter the function with __maybe_unused, just spell out when to build it. Signed-off-by: Tom Rini <trini@ti.com>
| * kbuild: fix bugs in cleaning targetsMasahiro Yamada2014-03-283-3/+4
| | | | | | | | | | | | | | | | | | "make clean", "make clobber", "make mrproper" and "make distclean" missed to clean-up some files when they were run with O=<some_dir> option. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reported-by: Wolfgang Denk <wd@denx.de>
| * kbuild: create a build directory automatically for out-of-tree buildMasahiro Yamada2014-03-281-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prior to Kbuild, the build system created a build directory, when it did not exist, for out-of-tree build. This feature was dropped when we switched to Kbuild because many of lines in makefiles were copied from Linux Kernel. (In Linux Kernel, we have to create a build directory by ourselves before starting build.) That feature seems worth reviving for less typing even if our code and Linux Kernel diverge. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Suggested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
| * Start the deprecation process for generic boardSimon Glass2014-03-282-0/+195
| | | | | | | | | | | | | | | | We should move forward to remove the old board init code. Add a prominent message to encourage maintainers to get started on this work. Signed-off-by: Simon Glass <sjg@chromium.org>
| * trats/trats2: enable exynos ace sha subsystem and hardware based lib randPrzemyslaw Marczak2014-03-282-0/+8
| | | | | | | | | | | | | | | | | | | | | | This allows to use exynos random number generator by enabling configs: - CONFIG_EXYNOS_ACE_SHA - CONFIG_LIB_HW_RAND Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> cc: Piotr Wilczek <p.wilczek@samsung.com> cc: Minkyu Kang <mk7.kang@samsung.com>
| * drivers: crypto: ace_sha: add implementation of hardware based lib randPrzemyslaw Marczak2014-03-282-4/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds implementation of rand library based on hardware random number generator of security subsystem in Exynos SOC. This library includes: - srand() - used for seed hardware block - rand() - returns random number - rand_r() - the same as above with given seed which depends on CONFIG_EXYNOS_ACE_SHA and CONFIG_LIB_HW_RAND. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> cc: Akshay Saraswat <akshay.s@samsung.com> cc: ARUN MANKUZHI <arun.m@samsung.com> cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Michael Walle <michael@walle.cc> Cc: Tom Rini <trini@ti.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * cpu: exynos4: add ace sha base addressPrzemyslaw Marczak2014-03-281-4/+4
| | | | | | | | | | Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * lib: rand: introduce new configs: CONFIG_LIB_RAND and CONFIG_LIB_HW_RANDPrzemyslaw Marczak2014-03-2810-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New configs: - CONFIG_LIB_RAND - to enable implementation of rand library in lib/rand.c - CONFIG_LIB_HW_RAND - to enable hardware based implementations of lib rand Other changes: - add CONFIG_LIB_RAND to boards configs which needs rand() - put only one rand.o dependency in lib/Makefile CONFIG_LIB_HW_RAND should be defined for drivers which implements rand library (declared in include/common.h): - void srand(unsigned int seed) - unsigned int rand(void) - unsigned int rand_r(unsigned int *seedp) Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Michael Walle <michael@walle.cc> Cc: Tom Rini <trini@ti.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * common, env: Fix support for environment in i2c eepromMatthias Fuchs2014-03-281-2/+7
| | | | | | | | | | | | | | | | When using CONFIG_SYS_I2C i2c needs to be initialized by i2c_init_all(). This is done in some places but not in eeprom_init(). Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
| * axs101: flush DMA buffer descriptors before DMA transactons startsAlexey Brodkin2014-03-281-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CPU sets DMA buffer descriptors with data required for inetrnal DMA such as: * Ownership of BD * Buffer size * Pointer to data buffer in memory Then we need to make sure DMA engine of NAND controller gets proper data. For this we flush buffer rescriptor. Then we're ready for DMA transaction. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Tom Rini <trini@ti.com>
| * net/designware: align DMA buffer descriptors to D$ lineAlexey Brodkin2014-03-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's important to have ability to flush/invalidate each DMA buffer descriptor individually to prevent incoherency of adjacent BDs. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Vipin Kumar <vipin.kumar@st.com> Cc: Stefan Roese <sr@denx.de> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Amit Virdi <amit.virdi@st.com> Cc: Sonic Zhang <sonic.zhang@analog.com>
| * Logo: TIZEN: Change booting logo size to official size.Jonghwa Lee2014-03-282-5774/+3605
| | | | | | | | | | | | | | | | | | | | | | | | Since TIZEN group has been used 450 X 140 bmp logo for lunchbox, this patch tries to change the logo size from 500 X 150 to official size. By reducing image size, we also save about 35KB. To make row aligned 4 bytes, add 2 pixels to row. Therefore the real width of image size is 452. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Reviewed-by : Przemyslaw Marczak <p.marczak@samsung.com>
| * spl: Fix guardian macros in spl.hMarek Vasut2014-03-286-6/+6
| | | | | | | | | | | | | | | | | | Fix the macros guarding the spl.h header for various platforms. Due to a typo and a propagation of it, the macros went out-of-sync with their ifdef check, so fix this. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com>
| * kbuild: move asm-offsets.c from SoC directory to arch/$(ARCH)/libMasahiro Yamada2014-03-2810-358/+280
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot has supported two kinds of asm-offsets.h. One is generic for all architectures and its source is located at ./lib/asm-offsets.c. The other is SoC specific and its source is under SoC directory. The problem here is that only boards with SoC directory can use the asm-offsets infrastructure. Putting asm-offsets.c right under CPU directory does not work. Now a new demand is coming. PowerPC folks want to use asm-offsets. But no PowerPC boards have SoC directory. It seems inconsistent that some boards add asm-offsets.c to SoC directoreis and some to CPU directories. It looks more reasonable to put asm-offsets.c under arch/$(ARCH)/lib. This commit merges asm-offsets.c under SoC directories into arch/$(ARCH)/lib/asm-offsets.c. By the way, I doubt the necessity of some entries in asm-offsets.c. I am leaving refactoring to the board maintainers. Please check "TODO" in the comment blocks in arch/{arm,nds32}/lib/asm-offsets.c. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Yuantian Tang <Yuantian.Tang@freescale.com>
| * kbuild: Rename UIMAGE to MKIMAGEMarek Vasut2014-03-287-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot uses the 'mkimage' tool to produce various image types, not only uImage image type. Rename the invocation name from UIMAGE to MKIMAGE. The following command was used to do the replacement: git grep 'quiet_cmd_mkimage.* = UIMAGE' | cut -d : -f 1 | \ xargs -i sed -i "s@\(quiet_cmd_mkimage\)\(.*\) = UIMAGE @\1\2 = MKIMAGE@" {} Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini2014-03-2826-488/+597
| |\
| | * dfu: mmc: Replace calls to u-boot commands with native mmc APIŁukasz Majewski2014-03-241-7/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For some time we have been using the run_command() with properly crafted string. Such approach turned to be unreliable and error prone. Switch to "native" mmc subsystem API would allow better type checking and shall improve speed. Also, it seems that this API is changing less often than u-boot commands. The approach similar to env operations on the eMMC has been reused. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
| | * mmc: Split mmc struct, rework mmc initialization (v2)Pantelis Antoniou2014-03-2426-396/+440
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The way that struct mmc was implemented was a bit of a mess; configuration and internal state all jumbled up in a single structure. On top of that the way initialization is done with mmc_register leads to a lot of duplicated code in drivers. Typically the initialization got something like this in every driver. struct mmc *mmc = malloc(sizeof(struct mmc)); memset(mmc, 0, sizeof(struct mmc); /* fill in fields of mmc struct */ /* store private data pointer */ mmc_register(mmc); By using the new mmc_create call one just passes an mmc config struct and an optional private data pointer like this: struct mmc = mmc_create(&cfg, priv); All in tree drivers have been updated to the new form, and expect mmc_register to go away before long. Changes since v1: * Use calloc instead of manually calling memset. * Mark mmc_register as deprecated. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| | * mmc: Convert mmc struct's name array to a pointerPantelis Antoniou2014-03-2416-16/+16
| | | | | | | | | | | | | | | | | | | | | Using an array is pointless; even more pointless (and scary) is using sprintf to fill it without a format string. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
| | * mmc: Remove ops from struct mmc and put in mmc_opsPantelis Antoniou2014-03-2417-119/+184
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the in-structure ops and put them in mmc_ops with a constant pointer to it. This makes the mmc structure smaller as well as conserving code space (in theory). All in-tree drivers are converted as well; this is done in a single patch in order to not break git bisect. Changes since V1: Fix compilation b0rked issue on omap platforms where OMAP_GPIO was not set. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
OpenPOWER on IntegriCloud