diff options
Diffstat (limited to 'include')
64 files changed, 71 insertions, 71 deletions
diff --git a/include/asm-generic/errno.h b/include/asm-generic/errno.h index 523defbab9..464cfb715c 100644 --- a/include/asm-generic/errno.h +++ b/include/asm-generic/errno.h @@ -1,5 +1,5 @@ /* - * U-boot - errno.h Error number defines + * U-Boot - errno.h Error number defines * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/include/config_distro_defaults.h b/include/config_distro_defaults.h index 9d1de5508f..0f85cd0e14 100644 --- a/include/config_distro_defaults.h +++ b/include/config_distro_defaults.h @@ -24,15 +24,15 @@ #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 #if defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) #if !defined(CONFIG_BOOTP_VCI_STRING) -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv7" #endif #elif defined(__aarch64__) #if !defined(CONFIG_BOOTP_VCI_STRING) -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv8" #endif #else #if !defined(CONFIG_BOOTP_VCI_STRING) -#define CONFIG_BOOTP_VCI_STRING "U-boot.arm" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.arm" #endif #endif #elif defined(__i386__) diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 342fdfe24a..535dc6eceb 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -334,7 +334,7 @@ * * Please notice, that the resulting clock frequency could differ from the * configured value. This is because the I2C clock is derived from system - * clock over a frequency divider with only a few divider values. U-boot + * clock over a frequency divider with only a few divider values. U-Boot * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated * approximation allways lies below the configured value, never above. */ diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index 2499b39c16..f6c0147dd9 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -271,7 +271,7 @@ /* * Load address and memory test area should agree with - * arch/nds32/config.mk. Be careful not to overwrite U-boot itself. + * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself. */ #define CONFIG_SYS_LOAD_ADDR 0x300000 diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index 36637aef95..658b16d3ae 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF536 brettl2 board + * U-Boot - Configuration file for BF536 brettl2 board */ #ifndef __CONFIG_BCT_BRETTL2_H__ diff --git a/include/configs/bf506f-ezkit.h b/include/configs/bf506f-ezkit.h index 597f1cd5d1..68a91a6b5a 100644 --- a/include/configs/bf506f-ezkit.h +++ b/include/configs/bf506f-ezkit.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF506F EZ-Kit board + * U-Boot - Configuration file for BF506F EZ-Kit board */ #ifndef __CONFIG_BF506F_EZKIT_H__ diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 84bb044421..9f44ebdb0b 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF518F EZBrd board + * U-Boot - Configuration file for BF518F EZBrd board */ #ifndef __CONFIG_BF518F_EZBRD_H__ diff --git a/include/configs/bf525-ucr2.h b/include/configs/bf525-ucr2.h index d12963a5f0..5a6067e5e2 100644 --- a/include/configs/bf525-ucr2.h +++ b/include/configs/bf525-ucr2.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for bf525-ucr2 board + * U-Boot - Configuration file for bf525-ucr2 board * The board includes ADSP-BF525 rev. 0.2, * 32-bit SDRAM (SAMSUNG K4S561632H-UC75), * USB 2.0 High Speed OTG USB WIFI, diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index 35a2228a6b..e9d900ef01 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF526 EZBrd board + * U-Boot - Configuration file for BF526 EZBrd board */ #ifndef __CONFIG_BF526_EZBRD_H__ diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h index 2f3dec5b09..dd62e7e0fe 100644 --- a/include/configs/bf527-ad7160-eval.h +++ b/include/configs/bf527-ad7160-eval.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF527 AD7160-EVAL board + * U-Boot - Configuration file for BF527 AD7160-EVAL board */ #ifndef __CONFIG_BF527_AD7160_EVAL_H__ diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index aee776132c..44de44f8f5 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF537 STAMP board + * U-Boot - Configuration file for BF537 STAMP board */ #ifndef __CONFIG_BF527_EZKIT_H__ diff --git a/include/configs/bf527-sdp.h b/include/configs/bf527-sdp.h index 51814a677f..6b51201629 100644 --- a/include/configs/bf527-sdp.h +++ b/include/configs/bf527-sdp.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF527 SDP board + * U-Boot - Configuration file for BF527 SDP board */ #ifndef __CONFIG_BF527_SDP_H__ diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index 1b7290e8d7..95811018cf 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF533 EZKIT board + * U-Boot - Configuration file for BF533 EZKIT board */ #ifndef __CONFIG_BF533_EZKIT_H__ diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index 4876169104..c8c48aeac4 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF533 STAMP board + * U-Boot - Configuration file for BF533 STAMP board */ #ifndef __CONFIG_BF533_STAMP_H__ diff --git a/include/configs/bf537-minotaur.h b/include/configs/bf537-minotaur.h index 4fbdca7239..be474ad1ba 100644 --- a/include/configs/bf537-minotaur.h +++ b/include/configs/bf537-minotaur.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for CSP Minotaur board + * U-Boot - Configuration file for CSP Minotaur board * * Thu Oct 25 15:30:44 CEST 2007 <hackfin@section5.ch> * Minotaur config, brushed up for official uClinux dist. diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h index 2474adb555..5794f471eb 100644 --- a/include/configs/bf537-pnav.h +++ b/include/configs/bf537-pnav.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF537 PNAV board + * U-Boot - Configuration file for BF537 PNAV board */ #ifndef __CONFIG_BF537_PNAV_H__ diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h index 89d26043da..6d4a93b324 100644 --- a/include/configs/bf537-srv1.h +++ b/include/configs/bf537-srv1.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for CSP Minotaur board + * U-Boot - Configuration file for CSP Minotaur board * * Thu Oct 25 15:30:44 CEST 2007 <hackfin@section5.ch> * Minotaur config, brushed up for official uClinux dist. diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index f250cdbf0a..b1787132ab 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF537 STAMP board + * U-Boot - Configuration file for BF537 STAMP board */ #ifndef __CONFIG_BF537_STAMP_H__ diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index b1d4f263ae..55becdc5a1 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF538F EZ-Kit Lite board + * U-Boot - Configuration file for BF538F EZ-Kit Lite board */ #ifndef __CONFIG_BF538F_EZKIT_H__ diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index 65009c6f28..8198cb862a 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF548 STAMP board + * U-Boot - Configuration file for BF548 STAMP board */ #ifndef __CONFIG_BF548_EZKIT_H__ diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h index 92251fc0bd..31862daf31 100644 --- a/include/configs/bf561-acvilon.h +++ b/include/configs/bf561-acvilon.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF561 Acvilon System On Module + * U-Boot - Configuration file for BF561 Acvilon System On Module * For more information please go to http://www.niistt.ru/ */ diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index efbc6c21d9..1a3b33f395 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF561 EZKIT board + * U-Boot - Configuration file for BF561 EZKIT board */ #ifndef __CONFIG_BF561_EZKIT_H__ diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index b5d4847523..3e0bff56dd 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BF609 EZ-Kit board + * U-Boot - Configuration file for BF609 EZ-Kit board */ #ifndef __CONFIG_BF609_EZKIT_H__ diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h index 60650aa77b..b9e859c07b 100644 --- a/include/configs/blackstamp.h +++ b/include/configs/blackstamp.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BlackStamp board + * U-Boot - Configuration file for BlackStamp board * Configuration by Ben Matthews for UR LLE using bf533-stamp.h * as a template * See http://blackfin.uclinux.org/gf/project/blackstamp/ diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h index 16949aa929..a262e7914f 100644 --- a/include/configs/blackvme.h +++ b/include/configs/blackvme.h @@ -1,4 +1,4 @@ -/* U-boot for BlackVME. (C) Wojtek Skulski 2010. +/* U-Boot for BlackVME. (C) Wojtek Skulski 2010. * The board includes ADSP-BF561 rev. 0.5, * 32-bit SDRAM (2 * MT48LC16M16A2TG or MT48LC32M16A2TG), * Gigabit Ether AX88180 (ASIX) + 88E1111 rev. B2 (Marvell), diff --git a/include/configs/br4.h b/include/configs/br4.h index 7dda472fe7..85f31a46a4 100644 --- a/include/configs/br4.h +++ b/include/configs/br4.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for BR4 Appliance + * U-Boot - Configuration file for BR4 Appliance * * based on bf537-stamp.h * Copyright (c) Switchfin Org. <dpn@switchfin.org> diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index e9e4e1414a..761e2c5f43 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for CM-BF527 board + * U-Boot - Configuration file for CM-BF527 board */ #ifndef __CONFIG_CM_BF527_H__ diff --git a/include/configs/cm-bf533.h b/include/configs/cm-bf533.h index a4647858dd..d06333dc41 100644 --- a/include/configs/cm-bf533.h +++ b/include/configs/cm-bf533.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for CM-BF533 board + * U-Boot - Configuration file for CM-BF533 board */ #ifndef __CONFIG_CM_BF533_H__ diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 0eebe56503..746a5bd417 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for CM-BF537E board + * U-Boot - Configuration file for CM-BF537E board */ #ifndef __CONFIG_CM_BF537E_H__ diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index 3a2d72626c..71008aaa06 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for CM-BF537U board + * U-Boot - Configuration file for CM-BF537U board */ #ifndef __CONFIG_CM_BF537U_H__ diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h index cde23ada40..37205a9c5b 100644 --- a/include/configs/cm-bf548.h +++ b/include/configs/cm-bf548.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for cm-bf548 board + * U-Boot - Configuration file for cm-bf548 board */ #ifndef __CONFIG_CM_BF548_H__ diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h index 9d8a2c613f..284ec83391 100644 --- a/include/configs/cm-bf561.h +++ b/include/configs/cm-bf561.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for CM-BF561 board + * U-Boot - Configuration file for CM-BF561 board */ #ifndef __CONFIG_CM_BF561_H__ diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 8e70d8c94c..67a143f8f6 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -7,7 +7,7 @@ */ /* --- - * Version: U-boot 1.0.0 - initial release for Sentec COBRA5272 board + * Version: U-Boot 1.0.0 - initial release for Sentec COBRA5272 board * Date: 2004-03-29 * Author: Florian Schlote * diff --git a/include/configs/dnp5370.h b/include/configs/dnp5370.h index 3b2da0ddd4..c46e60d2e5 100644 --- a/include/configs/dnp5370.h +++ b/include/configs/dnp5370.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for SSV DNP5370 board + * U-Boot - Configuration file for SSV DNP5370 board */ #ifndef __CONFIG_DNP5370_H__ diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h index 9fce1cda6b..7bc58dc414 100644 --- a/include/configs/edb93xx.h +++ b/include/configs/edb93xx.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for Cirrus Logic EDB93xx boards + * U-Boot - Configuration file for Cirrus Logic EDB93xx boards */ #ifndef __CONFIG_H diff --git a/include/configs/espt.h b/include/configs/espt.h index d854341b07..4896498c46 100644 --- a/include/configs/espt.h +++ b/include/configs/espt.h @@ -56,7 +56,7 @@ #define CONFIG_SYS_MAX_FLASH_BANKS (1) #define CONFIG_SYS_MAX_FLASH_SECT (150) -/* U-boot setting */ +/* U-Boot setting */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) #define CONFIG_SYS_MONITOR_LEN (128 * 1024) diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index 9c3ea883ff..834a22f7a5 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -113,7 +113,7 @@ #define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE) #define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE) -/* U-boot copy size from boot Media to DRAM.*/ +/* U-Boot copy size from boot Media to DRAM.*/ #define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) #define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512) diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h index 4757929618..7cb23466fb 100644 --- a/include/configs/ibf-dsp561.h +++ b/include/configs/ibf-dsp561.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for IBF-DSP561 board + * U-Boot - Configuration file for IBF-DSP561 board */ #ifndef __CONFIG_IBF_DSP561__H__ diff --git a/include/configs/ip04.h b/include/configs/ip04.h index 0993ffa444..3638648713 100644 --- a/include/configs/ip04.h +++ b/include/configs/ip04.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for IP04 board (having BF532 processor) + * U-Boot - Configuration file for IP04 board (having BF532 processor) * * Copyright (c) 2006 Intratrade Ltd., Ivan Danov, idanov@gmail.com * diff --git a/include/configs/ls2080a_emu.h b/include/configs/ls2080a_emu.h index 4a7ba2477b..534ebb6735 100644 --- a/include/configs/ls2080a_emu.h +++ b/include/configs/ls2080a_emu.h @@ -11,12 +11,12 @@ #ifdef CONFIG_LS2080A #define CONFIG_IDENT_STRING " LS2080A-EMU" -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2080A-EMU" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2080A-EMU" #endif #ifdef CONFIG_LS2085A #define CONFIG_IDENT_STRING " LS2085A-EMU" -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-EMU" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2085A-EMU" #endif #define CONFIG_SYS_CLK_FREQ 100000000 diff --git a/include/configs/ls2080a_simu.h b/include/configs/ls2080a_simu.h index 876ee30517..2c2ce7bfec 100644 --- a/include/configs/ls2080a_simu.h +++ b/include/configs/ls2080a_simu.h @@ -11,12 +11,12 @@ #ifdef CONFIG_LS2080A #define CONFIG_IDENT_STRING " LS2080A-SIMU" -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2080A-SIMU" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2080A-SIMU" #endif #ifdef CONFIG_LS2085A #define CONFIG_IDENT_STRING " LS2085A-SIMU" -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-SIMU" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.LS2085A-SIMU" #endif #define CONFIG_SYS_CLK_FREQ 100000000 diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 863b032042..3813e25d2f 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -165,7 +165,7 @@ /* NAND configuration for the NAND_SPL */ -/* Start copying real U-boot from the second page */ +/* Start copying real U-Boot from the second page */ #define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x3f800 /* Load U-Boot to this address */ diff --git a/include/configs/novena.h b/include/configs/novena.h index d5f517c76d..a5416131ba 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -1,5 +1,5 @@ /* - * Configuration settings for the Novena U-boot. + * Configuration settings for the Novena U-Boot. * * Copyright (C) 2014 Marek Vasut <marex@denx.de> * diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 1dd71a8eb6..996f772a28 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -21,7 +21,7 @@ #include <asm/arch/omap.h> /* ---------------------------------------------------------------------------- - * Supported U-boot commands + * Supported U-Boot commands * ---------------------------------------------------------------------------- */ #define CONFIG_CMD_ASKENV @@ -37,7 +37,7 @@ #define CONFIG_CMD_PING /* ---------------------------------------------------------------------------- - * Supported U-boot features + * Supported U-Boot features * ---------------------------------------------------------------------------- */ #define CONFIG_SYS_LONGHELP diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index 2004d148c6..0f16a6e19d 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -175,7 +175,7 @@ #endif /* CONFIG_USB_OMAP3 */ /* ---------------------------------------------------------------------------- - * U-boot features + * U-Boot features * ---------------------------------------------------------------------------- */ #define CONFIG_SYS_MAXARGS 16 /* max args for a command */ diff --git a/include/configs/omap3_evm_quick_mmc.h b/include/configs/omap3_evm_quick_mmc.h index 27cd9bed5c..23a8a07132 100644 --- a/include/configs/omap3_evm_quick_mmc.h +++ b/include/configs/omap3_evm_quick_mmc.h @@ -16,7 +16,7 @@ #include <asm/arch/omap.h> /* ---------------------------------------------------------------------------- - * Supported U-boot commands + * Supported U-Boot commands * ---------------------------------------------------------------------------- */ #define CONFIG_CMD_MMC @@ -30,7 +30,7 @@ */ /* ---------------------------------------------------------------------------- - * Supported U-boot features + * Supported U-Boot features * ---------------------------------------------------------------------------- */ #define CONFIG_SILENT_CONSOLE diff --git a/include/configs/omap3_evm_quick_nand.h b/include/configs/omap3_evm_quick_nand.h index 124e8c6641..bb908fad3e 100644 --- a/include/configs/omap3_evm_quick_nand.h +++ b/include/configs/omap3_evm_quick_nand.h @@ -16,7 +16,7 @@ #include <asm/arch/omap.h> /* ---------------------------------------------------------------------------- - * Supported U-boot commands + * Supported U-Boot commands * ---------------------------------------------------------------------------- */ #define CONFIG_CMD_NAND @@ -29,7 +29,7 @@ */ /* ---------------------------------------------------------------------------- - * Supported U-boot features + * Supported U-Boot features * ---------------------------------------------------------------------------- */ #define CONFIG_SILENT_CONSOLE diff --git a/include/configs/origen.h b/include/configs/origen.h index ef80bf60ca..fa71874f8a 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -111,7 +111,7 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x02040000 -/* U-boot copy size from boot Media to DRAM.*/ +/* U-Boot copy size from boot Media to DRAM.*/ #define COPY_BL2_SIZE 0x80000 #define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512) #define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512) diff --git a/include/configs/pr1.h b/include/configs/pr1.h index 2e5ce75629..1af9ef7cad 100644 --- a/include/configs/pr1.h +++ b/include/configs/pr1.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for PR1 Appliance + * U-Boot - Configuration file for PR1 Appliance * * based on bf537-stamp.h * Copyright (c) Switchfin Org. <dpn@switchfin.org> diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h index 7148f1da95..0fd2caf161 100644 --- a/include/configs/sh7763rdp.h +++ b/include/configs/sh7763rdp.h @@ -56,7 +56,7 @@ #define CONFIG_SYS_MAX_FLASH_BANKS (1) #define CONFIG_SYS_MAX_FLASH_SECT (520) -/* U-boot setting */ +/* U-Boot setting */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) #define CONFIG_SYS_MONITOR_LEN (128 * 1024) diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 2492f99269..b7ac402f98 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -92,7 +92,7 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x02040000 -/* U-boot copy size from boot Media to DRAM.*/ +/* U-Boot copy size from boot Media to DRAM.*/ #define COPY_BL2_SIZE 0x80000 #define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512) #define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512) diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index d2630f4be1..a309448ecf 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -12,7 +12,7 @@ */ -/* U-boot Load Address */ +/* U-Boot Load Address */ #define CONFIG_SYS_TEXT_BASE 0x00700000 /* Ethernet driver configuration */ diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index f4213217bb..6db628a052 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -45,7 +45,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x00190000 #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -/* U-boot Load Address */ +/* U-Boot Load Address */ #define CONFIG_SYS_TEXT_BASE 0x00010000 #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h index 1e74535b5c..0f4d959e67 100644 --- a/include/configs/tcm-bf518.h +++ b/include/configs/tcm-bf518.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for Bluetechnix TCM-BF518 board + * U-Boot - Configuration file for Bluetechnix TCM-BF518 board */ #ifndef __CONFIG_TCM_BF518_H__ diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index a8947c5934..fc98d242fb 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -1,5 +1,5 @@ /* - * U-boot - Configuration file for TCM-BF537 board + * U-Boot - Configuration file for TCM-BF537 board */ #ifndef __CONFIG_TCM_BF537_H__ diff --git a/include/configs/ts4800.h b/include/configs/ts4800.h index 2f6c97cf58..50e1abb0e5 100644 --- a/include/configs/ts4800.h +++ b/include/configs/ts4800.h @@ -20,7 +20,7 @@ #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_NO_FLASH /* No NOR Flash */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-boot is a 2nd stage bootloader */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage bootloader */ #define CONFIG_HW_WATCHDOG diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 599b26959e..bf89a0e070 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -4,7 +4,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/* U-boot - Common settings for UniPhier Family */ +/* U-Boot - Common settings for UniPhier Family */ #ifndef __CONFIG_UNIPHIER_COMMON_H__ #define __CONFIG_UNIPHIER_COMMON_H__ diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 814934aa92..133041bca5 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -24,7 +24,7 @@ #define CONFIG_SYS_ICACHE_OFF #define CONFIG_IDENT_STRING " vexpress_aemv8a" -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv8.vexpress_aemv8a" /* Link Definitions */ #if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \ diff --git a/include/configs/vexpress_ca15_tc2.h b/include/configs/vexpress_ca15_tc2.h index 59b6310b57..883e58e660 100644 --- a/include/configs/vexpress_ca15_tc2.h +++ b/include/configs/vexpress_ca15_tc2.h @@ -12,7 +12,7 @@ #define __VEXPRESS_CA15X2_TC2_h #define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca15x2_tc2" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv7.vexpress_ca15x2_tc2" #include "vexpress_common.h" #define CONFIG_SYSFLAGS_ADDR 0x1c010030 diff --git a/include/configs/vexpress_ca5x2.h b/include/configs/vexpress_ca5x2.h index a4ffdf54db..43850272a6 100644 --- a/include/configs/vexpress_ca5x2.h +++ b/include/configs/vexpress_ca5x2.h @@ -12,7 +12,7 @@ #define __VEXPRESS_CA5X2_h #define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca5x2" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv7.vexpress_ca5x2" #include "vexpress_common.h" #endif /* __VEXPRESS_CA5X2_h */ diff --git a/include/configs/vexpress_ca9x4.h b/include/configs/vexpress_ca9x4.h index 71233d8c3f..99be50a5bd 100644 --- a/include/configs/vexpress_ca9x4.h +++ b/include/configs/vexpress_ca9x4.h @@ -12,7 +12,7 @@ #define __VEXPRESS_CA9X4_H #define CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca9x4" +#define CONFIG_BOOTP_VCI_STRING "U-Boot.armv7.vexpress_ca9x4" #include "vexpress_common.h" #endif /* VEXPRESS_CA9X4_H */ diff --git a/include/linux/linkage.h b/include/linux/linkage.h index efb04eeed4..8e2f15a635 100644 --- a/include/linux/linkage.h +++ b/include/linux/linkage.h @@ -1,5 +1,5 @@ /* - * U-boot - linkage.h + * U-Boot - linkage.h * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index c1d039cb85..442316b4e2 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -5,7 +5,7 @@ * notably ethernet adapters and various modems. It's used mostly with * firmware based USB peripherals. * - * Ported to U-boot by: Thomas Smits <ts.smits@gmail.com> and + * Ported to U-Boot by: Thomas Smits <ts.smits@gmail.com> and * Remy Bohmer <linux@bohmer.net> */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 4adf35e3ae..b824f13477 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -11,7 +11,7 @@ * * This software is licensed under the GNU GPL version 2. * - * Ported to U-boot by: Thomas Smits <ts.smits@gmail.com> and + * Ported to U-Boot by: Thomas Smits <ts.smits@gmail.com> and * Remy Bohmer <linux@bohmer.net> */ |
